A photo of ceiling fan wiring and connections. Photo Credit: Timothy Thiele

In order to hang the ceiling fan, first connect the wires and then secure the ceiling fan housing. The ceiling fan housing has two slots on one side. Place these over the two clips on the fan support housing that is attached to the junction box. this will allow the fan to hang securely while you make the electrical connections.

Connect the white wires together (neutrals), the black wires together (the light feed), the green wires together (the ground), and the red wire to the fan connection wire (marked "fan" with a tag).

Use wire nuts to make these connections and then tuck these wires neatly in the area around the support bracket. Remember, the housing cover will need to cover these wires and none of the wires can be sticking out from under the cover. Once everything is connected, lift the fan and line the cover holes up with the bracket. Secure the cover with the screws provided and tighten snugly. This step may require an additional person to either hold the fan or insert and tighten the screws.

Read the original post:
How to Install Ceiling Fans Step 1 - About.com Home

Photo: motherearthnews.com

Installing a ceiling fan is a fantastic way to cut energy costs all year round. It helps circulate cool air in the warm summer months, but can also help push heated air back down in the winter, making the temperature feel warmer and allow you to dial down the thermostat. Its also the perfect weekend project for a homeowner, since you can accomplish the task in a few hours and enjoy the investment immediately.

Note: this project is designed for installing a ceiling fan where an overhead light fixture already exists. If additional wiring is necessary to install, consult an electrician. All wiring must follow local codes.

MATERIALS AND TOOLS Ceiling fan kit Ceiling outlet box (approved for ceiling fan) Expandable brace bar (if no access from above, easiest) or dimensional framing lumber (28) and screws Wire connectors, if not included Screwdriver Utility knife Keyhole saw Adjustable wrench Hex-driver or socket wrench Needlenose pliers Ladder or step ladder Safety glasses and dust mask

INSTRUCTIONS 1. When choosing a fan, note the size of your room. The blades need to be at least 18-24 from all walls, and be a minimum of 7 from the floor, and 10 from the ceiling. Choose a 36 fan if your room is less than 12 square, 42 if the room is between 144 and 256 square, and 52 if the room is more than 1515 square.

Photo: diyadvice.com

Choose a ceiling box approved for fans. Boxes for overhead lights are not strong enough to support the weight. Choose a metal box that can support the weight. If you have access from the attic above you can install the box to additional framing between joists. If not, grab a brace bar at the hardware store. This will screw into the joists, and the ceiling box and fan will hang from the newly added support.

2. Turn off the electricity at the breaker box, then carefully remove the old light fixture and its ceiling box with a screwdriver. Make sure the wiring is in good condition and consult an electrician to replace if necessary. Making sure the hole is between two ceiling joists, trace the outline of the ceiling box onto the ceiling and cut out the shape with a keyhole saw. It should be about 5diameter.

3. Following the instructions on the brace bar, position it perpendicular to ceiling joistsand twist the outer bar until it locks into the foot. Continue turning until the foot is fastened. Next, turn the inner bar to secure the other foot.

If youre not using a brace bar, measure the distance between the ceiling joists, and cut a piece of 2 8 framing lumber to span the distance, and secure with screws.

Link:
How to Install a Ceiling Fan - Bob Vila

Hi, my name is Justin Zarudny, dedicated owner of SoCal Steam Clean: a premium San Diego carpet cleaning, upholstery, and tile,as well as restoration service. I am thoroughly dedicated in providing all of my clients with a completely rewarding carpet cleaning experience, eliminating any risks or concerns associated with having their carpets, upholstery, tile or grout cleaned. I will personally make sure that all clients are content with the work that we do, as I want to offer the people of San Diego a carpet cleaning service that they can wholly trust time and time again. Once youve made the decision to work with us, youll never think of calling another carpet cleaning company again; well be your go-to guys.

The essential purpose of this website is to educate the community of San Diego on how to manage and maintain the highest standard of indoor air quality, give you important information on our green carpet cleaning methods, as well as the top standards of our cleaning and restoration processes. Throughout the website youll find descriptions about what we do, along with walk-throughs for each service, tips on home cleaning, information on green cleaning to help the environment, and much more. In addition, we also have a blog where we discuss certain cleaning processes and give out tips on home cleaning, Carpet Cleaning San Diego and home improvement.

Bay Park, Ocean Beach, Pacific Beach, Coronado, Sorrento Valley, Fairbanks Ranch, Del Mar, La Costa, Encinitas, Vista, Oceanside, Fallbrook, La Jolla, Point Loma, Mission Beach, University City, Rancho Santa Fe, Carmel Valley, Solana Beach, Carlsbad, Cardiff

Old Town, Hillcrest, Golden Hills, North Park, South Park, Normal Heights, Linda Vista, Kearny Mesa, Mira Mesa, Del Cerro, Downtown, Mission Valley, Kensington, Bankers Hill, City Heights, University Heights, Clairemont, Tierrasanta, Scripps Ranch, Talmadge

Chula Vista, Spring Valley, Lemon Grove, Rancho San Diego, Lakeside, Pine Valley, Escondido, Poway, Eastlake, Bonita, National City, La Mesa, El Cajon, Santee, Ramona, Alpine, San Marcos, Rancho Bernardo

Los Angeles, Palm Springs, Temecula, Orange County

See the original post here:
Carpet Cleaning San Diego | Zero-Residue | Socal Steam Clean

Mold removal and remediation is the type of service a homeowner wants done right the first time. Informed consumers almost always consider cost as the most important variable in their search for the right product or service. However, as most informed consumer is aware, deciding on the services of a company with the cheapest cost is not always the best decision.

There are indeed many variables to take into consideration when choosing a service provider to do any type of work in your home. When it comes to mold removal and remediation, arming oneself with as much knowledge about the subject as possible is key to determining which company is the best fit for your budget. (Review Tips on Mold Removal)

A simple breakdown of service levels will help compare the cost of the remediation and quality of work being done, safeguarding your home from future mold outbreaks.

Mold Remediation Level 1

The least expensive option is also the least effective. Most of the time, the services performed at this level are: Simply cutting affected area away with a knife or saw Cleaning/Scrubbing of affected area, possibly without IICRC-approved chemicals Affected area will not be quarantined leaving your home susceptible to recolonization of mold spores on walls, above ceiling, below floors or in air ducts. Mold testing may or may not be done. However, if mold testing is completed, it will more than likely be done by the removal company itself and not be a 3rd Part Industrial Hygienist (IH) o Industrial Hygienists are certified by the American Industrial Hygiene Association, equipped with the most current and useful knowledge on Indoor Air Quality. o Companies performing testing without the use of a 3rd Party IH inherently cause a conflict of interest. All data could be altered for the benefit of the service provider.

Cost $500 $1000

Mold Remediation Level 2

Medium level jobs have a medium price tag. However, you wont always get that optimum level of service you hoped for. Variables to keep in mind with this level of service are: Like Level 1 jobs, all technicians may not be certified through the IICRC (Institute of Inspection Cleaning and Restoration Certification) The cost for mold removal will only covered a medium-sized affected area A third party IH may not be hired to conduct testing, causing potential risk to the work already done.

Cost $1,000 $5,000

More here:
Mold Remediation Costs | Costs for Mold Remediation

Whats the Difference?

Since microscopic mold spores exist naturally almost everywhere, indoors and outdoors, removing all mold from a home or business is impossible. Some restoration businesses advertise mold removal and even guarantee to remove all mold. This is a fallacy.

A qualified restoration company understands the science behind mold and mold growth. SERVPRO Franchise Professionals have the training and expertise to remediate the mold in your home or business. Mold remediation focuses on getting mold levels back to normal, natural levels.

Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. To learn more about our mold remediation process.

When water intrudes into your property, mold growth can start in as little as 48 hours. Consider the following mold facts:

Until Help Arrives

If possible, stay out of any affected areas, and don't touch or disturb the mold.

More Mold Damage Tips

About Black Mold

View post:
Mold Removal versus Mold Remediation, What's the ...

What are the best temperatures for mold?

There are three critical temperatures for mold: the temperature below which no mold growth occurs, the temperature above which no mold growth occurs, and the temperature at which most rapid mold growth takes place. Most mold species grow in temperatures ranging from 59 to 95 F (15 to 35 C), although there are molds which will grow at almost freezing and others which thrive at over 150 F. The average optimum for mold growth is usually stated to be in the vicinity of 86 F. Freezing mold does not kill mold spores or mold colonies---they become dormant waiting for warm temperatures and access to moisture to grow again.

"Molds are microscopic fungi that comprise 25% of the earth's biomass. They can be found almost anywhere and can grow on virtually any organic substance as long as moisture and oxygen are present. Molds can grow on wood, paper, carpet, foods, and insulation. Moisture encourages mold growth. People who are allergic to mold or whose asthma is triggered by mold usually react to the spores, the reproductive bodies for molds. The process by which these spores are released into the air becomes intensified when moldy material is damaged or disturbed. Sometimes mold can produce a toxic substance called mycotoxins, which also can cause illness in sensitive populations, especially those with substantial exposures, such as agricultural workers. It is impossible to eliminate all mold and mold spores in the indoor environment. However, mold growth can be controlled indoors by controlling moisture. Many types of molds exist and they all have the potential to cause health effects. Molds produce allergens that can trigger allergic reactions or asthma attacks. Health concerns are an important reason to prevent mold growth and to remedy/clean up any existing indoor mold growth. The range of symptoms of overexposure to mold include cough, congestion, runny nose, eye irritation, and asthma symptoms. As is true of all environmentally-related illnesses, the sensitivity and vulnerability of the person will dictate the level of response to any given exposure." ---American Nursing Association

Molds are part of the natural environment. Outdoors, molds play a part in nature by breaking down dead organic matter such as fallen leaves and dead trees, but indoors, mold growth should be avoided. Molds reproduce by means of tiny spores; the spores are invisible to the naked eye and float through outdoor and indoor air. Mold may begin growing indoors when mold spores land on surfaces that are wet. There are many types of mold, and none of them will grow without water or moisture.

Molds are usually not a problem indoors, unless mold spores land on a wet or damp spot and begin growing. Molds have the potential to cause health problems. Molds produce allergens (substances that can cause allergic reactions), irritants, and in some cases, potentially toxic substances (mycotoxins). Inhaling or touching mold or mold spores may cause allergic reactions in sensitive individuals. Allergic responses include hay fever-type symptoms, such as sneezing, runny nose, red eyes, and skin rash (dermatitis). Allergic reactions to mold are common. They can be immediate or delayed. Molds can also cause asthma attacks in people with asthma who are allergic to mold. In addition, mold exposure can irritate the eyes, skin, nose, throat, and lungs of both mold-allergic and non-allergic people. Symptoms other than the allergic and irritant types are not commonly reported as a result of inhaling mold. Research on mold and health effects is ongoing.

It is impossible to get rid of all mold and mold spores indoors; some mold spores will be found floating through the air and in house dust. The mold spores will not grow if moisture is not present. Indoor mold growth can and should be prevented or controlled by controlling moisture indoors. If there is mold growth in your home, you must clean up the mold and fix the water problem. If you clean up the mold, but don't fix the water problem, then, most likely, the mold problem will come back. From Wikipedia...

Both our indoor and outdoor environment have mold spores present. There is no such thing as a mold free environment in the Earth's biosphere.

Spores needs three things to grow into mold:

Mold colonies can grow inside building structures. The main problem with the presence of mold in buildings is the inhalation of mycotoxins. Molds may produce an identifiable smell. Growth is fostered by moisture. After a flood or major leak, mycotoxin levels are higher in the building even after it has dried out (source: CMHC).

Food sources for molds in buildings include cellulose-based materials, such as wood, cardboard, and the paper facing on both sides of drywall, and all other kinds of organic matter, such as soap, dust and fabrics. Carpet contains dust made of organic matter such as skin cells. If a house has mold, the moisture may be from the basement or crawl space, a leaking roof, or a leak in plumbing pipes behind the walls. Insufficient ventilation can further enable moisture build-up. The more people in a space, the more humidity builds up. This is from normal breathing and perspiring. Visible mold colonies may form where ventilation is poorest, and on perimeter walls, because they are coolest, thus closest to the dew point.

Visit link:
Residential Mold Remediation | Protecting Your Home ...

Even the cleanest homes have the potential for mold. Residential building structures have many areas that offer prime environments for mold to grow. Basements, bathrooms, utility rooms, laundry equipment and kitchens are some of the areas where black mold is often found. Homeowners can take proactive steps to drastically limit mold grown, but unfortunately, its literally impossible to eradicate all together.

Tips for preventing mold growth:

Ventilate

Basements especially should have a ventilation system in place. This can help to bring fresh air in and push water vapor out. Homes that are not equipped with windows should use a dehumidifier or circulation fan.

Fix foundation cracks

The smallest crack or leak can provide a perfect habitat for mold growth. Window frames, doors and corner locations of the foundation can be sealed using a water proof chalk. This is a service that should be performed at the beginning of rainy seasons.

Keep stored items organized

When storing personal belongings or furniture, it is best not to pile items on top of each other. This can cause moisture to get trapped, and it prevents air circulation.

Try baking soda

Baking Soda helps to absorb moisture. By placing a box of baking soda under kitchen and bathroom cabinets and in the refrigerator, it will prevent moisture from forming and creating an ideal habitat for mold growth.

See the rest here:
Mold Testing & Remediation Reviews - Angies List

I see mold inside my home.

Mold can grow in your home in the basement, crawlspace or on wallswhere water may have been and wasnt dried properly, you can often see visible mold.Learn More

Free Property Evaluation 866.645.3391

Mold can grow in your home in the basement, crawlspace or on walls where water may have been and wasnt dried properly, you can often see visible mold.Learn More

Free Property Evaluation 866.645.3391

Is your property still wet? Many times property owners think there floors or walls are dry. Moisture content assessment after a water damage is imperative following a water damage event inside your home or business. Act quickly, call Remediation Group and prevent mold growth.Learn More

Free Property Evaluation 866.645.3391

Musty odors in your home could be a sign of mold growing in places you cant see such as inside your walls. Mold/Fungal spores release MVOC gasses which are characterized as musty.Learn More

Free Property Evaluation 866.645.3391

Many mold spores are allergenic and even toxic. Hiring an IAQ Professional to inspect and test the air quality in your home is advisable.Learn More

Read more:
Complete Mold Solutions | Mold Removal, Remediation ...

Moldstat the certified mold remediation cleaning products.

Looking fort a low cost way to remove mold?

Choose effective Moldstat Mold Killer for Do it yourself (DIY) Mold Removal. MoldSTAT Plus Coverage: 3/4 oz of concentrate makes 1 Gallon of full strength mold removal solution enough to treat 100 sq ft. Making MoldSTAT Plus economical enough to use for both preliminary mold cleaning and final mold killing.

MoldSTAT Plus can be used in TWO steps of a mold removal project. First use MoldSTAT Plus as a mold remover and cleaner to wipe away gross surface green or black mold. Second with the surface mold is removed, kill mold roots using the same MoldSTAT Plus to soak into the pores of the surface and penetrate deep to mold roots.

Many people ask us "does bleach kill mold?" and the answer might surprise you. Look for an EPA registration number on a bleach container. If you can't find it, then it isn't registered. Additionally the EPA advises against using bleach as a routine mold remover. Instead pick MoldSTAT Plus, a mold remover fungicide solution designed for removing mold (including green, white and black mold)

Home Mold Removal Products that offer practical solutions for home mold spore removal.

Read additional MoldSTAT product reviews at: Mold Removal Product Reviews

View original post here:
Black Mold Removal Products: Mold Cleaner, Mold Killer ...

Starting a home mold remediation project is a big task, especially if the mold has grown to several areas in the home. When you are dealing with remediation mold problems, it is a good idea to consult with a mold specialist in order to determine the best cleanup plan for your individual situation. This article covers the steps that should be taken during the remediation process. But keep in mind that it can be very dangerous to your health if the mold is not handled carefully, which is why a professional should be consulted.

Continued exposure to mold spores can cause many serious health problems, such as respiratory infections, headaches, dizziness, autoimmune diseases, digestive problems, and even cancer. Often, these symptoms start out small, and the home owner does not realize that they are living in a toxic environment. Over time, the mold problem will become worse, and the symptoms will also worsen.

If you discover that you need to remove mold from your home, start as soon as possible in order to prevent additional health complications. Some people dont understand how serious mold problems can be, and they choose to ignore the problem or do a partial cleanup to get rid of the visible mold. The problem is that mold spores continue to spread through the air, causing exposure to everyone in the home.

These are a few steps to follow during the cleanup process:

Because different surfaces may be affected, it is important to understand the remediation mold process for each type of building materials that you are working with. For example, if the mold has affected the wood structure of a home, the area should be scrubbed with a wire brush, then treated with a biocide and encapsulated. Sometimes it is necessary to use the biocide several times in order to kill all of the mold spores that are present.

Different cleaning techniques should be used for concrete, tile, and other building materials. So, be sure to understand the process completely before you begin your home mold remediation.

In some instances, we recommended consulting with a professional before beginning the mold removal process even if you want to do the work yourself. Most mold removal professionals provide free consultations so they will assess your home and discuss the work that needs to be done at no cost to you. We recommend consulting with a professional if:

For a list of local mold removal professionals that provide free consultations, follow this link.

Additional Reading:

Get Rid Of Mold- Information ongetting rid of mold.EPA mold remediation information, recommendedmold remediation equipment, and how to find reputable localmold remediation companies.

View post:
Home Mold Remediation ..........Guide To Removing Mold