Hot Water Heater Company in Malaysia | Supply | Repair …

A broken dip tube can mean coldwatergoes into your homeshot waterpipes before being adequately heated. Another cause ofhot water notbeinghotenough is sediment buildup in thewater heatertank.

In other, a water heater thatproduces no hot water may not be getting power, or it may have a tripped limit switch or one or more failed heating elements. First, check the water heaters circuit breaker in the service panel to make sure it hasnt tripped. If it has, switch it off, then switch it back on again.If the heaters breaker did not trip (is on), turn off the breaker, remove the access panel for the upper element on the water heater. Remove the insulation and the plastic safetyguard, being careful not to touch the wires or electrical terminals. Press the red buttonthe high-temperature cutoff reset buttonlocated above the upper thermostat. Replace the safety guard, insulation, and access panel, then turn on the heaters circuit breaker. If that doesnt solve the problem, test each heating element and replace it, if necessary.

Read the rest here:
Hot Water Heater Company in Malaysia | Supply | Repair ...