Making a few easy changes around the house can mean substantial savings. Here are sixsimple fixes we found courtesy of Real Simple.

1. Seal sneaky leaks. Seal electrical outlets in the exterior walls of your house. Foam insulating gaskets act as a barrier so conditioned air stays in, rather than leaking out. Just unscrew the outlet cover, install the gasket, and replace the cover.

2. Go with the flow. Install a high-performance showerhead. This uses 1 gallons of water per minuterather than 2 gallons. By switching, a family of four (each person taking daily 10-minute showers) could save about $88 a year on water and energy costs with gas water heating and $135 a year with electric, according to figures from the DOE Federal Energy Management Program.

3. Swap out bulbs. Replace incandescent bulbs with CFLs (compact fluorescent lightbulbs). A $10 CFL uses about a quarter of the wattage of an incandescent bulb, which amounts to more than $30 in savings per replaced bulb over the lifetime of the CFL.

4. Wash clothes in cold water. You may already know that this saves energy, but do you know how much? "Up to 90 percent of the cost of washing clothes comes from heating the water, so use hot water only for very dirty clothes," says Adam Gottlieb of the California Energy Commission. Another tip: "Match the water level to the amount of clothes, or wait to wash full loads," suggests Clement. "The water savings can be enormous."

5. Close (or open) your blinds. Leave blinds down on south- and west-facing windows on hot summer days to keep your space cool. "This prevents the sun from warming your home and making your cooling system work harder," says Clement. "In winter, leave blinds up to allow the sun to help heat your home."

6. Upgrade your heating (and cooling) system. Install (and properly program) a programmable thermostat. A programmable thermostat costs $50 to $80, is easy to install, and can save about $180 a year. You can shave 2 percent off your heating (or cooling) bill for each degree you lower (or raise) the thermostat for at least eight hours a day while you're away from home or asleep.

For more ways to cut your energy bill, click here.

See original here:
6 simple energy-saving home fixes

Printer-friendly versionSend to friend

BISBEE City buildings will be getting some insulation to help cut heating and cooling bills at city hall, public works and the library thanks to an $11,936grant.

Andy Haratyk, operations manager of Public Works, explained that the state called the city and said there was some money left in the Energy Efficiency Conservation Block Grant pot from the governorsoffice.

The city was granted money from a previous EECBG to provide new double-pane windows for city hall to save on heating and coolingbills.

They were so impressed with us and the good work weve done weve sort of become a poster child for our handling of this grant, addedHaratyk.

He was asked if there was any additional energy conservation work that the city could do and he indicated there was. The money from this grant, which requires no city match of dollars, will add insulation to city hall, the public works building and the Copper Queen Library, according to the grantapplication.

Wasting no time, public works immediately put the project out to bid and the council awarded Arizona Comfort Systems the contract to install the insulation for $10,934. The company will use a natural blend of cellulose and fiber insulation. The company also agreed to repair a few holes in one of the ceilings at cityhall.

The truth in taxation hearing was held as required by law raising the property tax from $2.0363 to $2.1577 per $100 of assessed value that will generate an additional $27,857 for the general fund. The raise was necessary to make up for the $1 million loss in city property values as determined by the county Assessors Office, explained city Finance Director DeeFlanagan.

No one from the public offered an opinion during the publichearing.

The council unanimously approved the 2012/2013 budget of $24,869,653, again with no publicinput.

See the original post:
Grant to help cut costs to cool, heat Bisbee City Hall

MENDOTA - The Mendota Civic Center will finally be getting a new roof after the Mendota City Council approved a bid at its June 18 regular meeting.

The faulty shingles on the Civic Center will be torn off and replaced with a metal roof, with the work being done by Wiesbrook Sheet Metal of Plainfield. The council approved the bid not to exceed $242,000.

That business was handled under Alderman Walt Weiland's report. In other action from his report, the council approved an ordinance to update information in regard to bulk water sales by the city.

Alderman Bill Hunt reported that the Mendota Chamber of Commerce made a request to the city for a donation to help with expenses for the Fourth of July fireworks. The council agreed to donate $1,500, the same as it did last year.

Another donation request, this one from the Tri-County Fair Association, was also approved in the amount of $500.

The council amended the wage ordinance passed at the last meeting in regard to pay raises for the fire chief and assistant fire chief. The fire chief will get a $1,500 raise over last year and the assistant chief a $600 raise.

In action from Alderman Randy Morris's report, the council approved a bid of $7,300 from Walter Bros. Plumbing, Heating and Cooling to install a heating ventilation and air conditioning system at 700 Illinois Ave.

Under Alderman Justin Setchell's report, the council agreed to issue a plumber's license to Arturo Escatel and a forestry license to Do It All Service.

Alderman Jim Fitzpatrick informed the council of a request to use Snyder's Grove for a wedding on July 7, which was approved by the full council.

For the complete article see the 06-20-2012 issue.

Read the rest here:
Council OKs bid for new civic center roof

It would be a shame to spend $15,000 on a new heat pump only to find out that it's not operating efficiently because it wasn't installed correctly. Or that the air you paid to condition was seeping into your attic or crawl space, instead of heating or cooling your living room.

These are the kind of mishaps that hiring contractors trained by the regional Performance Tested Comfort System program can help you avoid.

The program, administered by the Bonneville Power Administration, trains and certifies heating contractors to install heat pumps to the highest standards so that the units deliver the greatest energy savings and comfort possible.

"There are a lot of different things about heat pumps that need to be done correctly to be as efficient as the manufacturer says it is," said Stephanie Vasquez, PTCS program manager for BPA.

Additionally, it's important that the ductwork is tight, she said.

"A lot of times, the ductwork is put together in a way so that air is coming out of cracks and holes all over the place, heating the crawl space or attic instead of the rooms," Vasquez said. "It can waste up to 30 percent of the energy used by the unit."

PTCS provides step-by-step support to contractors to ensure that your new heat pump has been commissioned and configured to deliver conditioned air to its greatest potential.

That's why homeowners should look for contractors certified by the PTCS program, Vasquez said. Plus, if you want to take advantage of Clark Public Utilities' $500 rebates for installing a new energy-efficient heat pump or sealing ducts, hiring a PTCS-certified technician is a requirement. The utility offers a list of contractors who have received the PTCS training and certification.

Contractors certified by the program install heat pumps to standards higher than current building codes so that the units will perform well and have a long life -- and so you can avoid the need for backup heat.

According to BPA's website, a PTCS-certified technician will:

Originally posted here:
Energy Adviser: Training helps avoid mishaps on heat pumps

13-06-2012 05:51 Contact us : Call us now : 720-366-1512 Website : Meiers Mechanical (M and M Heating & Air-conditioning) has been in business for over 14 years and is family owned and operated in Longmont, Colorado. We specialize in Furnace Installation, Furnace Repair, Air Conditioning Installation, Air Conditioning Repair. We service all brands, including Trane and Carrier. We install and service furnaces, A units humidifiers and all over HVAC components for Longmont, Boulder, Erie, Broomfield, Loveland, Lyons, Frederick, Johnstown and Fort Collins. We also offer 24/7 emergency service. Call us today!

Read the original here:
M and M Heating and Air Conditioning - work concept - Video

Naples City Council is expected to consider a $120,000 contract to design a new heating, ventilation and cooling system for city hall during its regular meeting today.

Council's approval would appropriate $110,605 from the general fund contingency toward the contract with Matern Professional Engineering, Inc. of Maitland Fla, north of Orlando.

The need for a new air conditioning system first came up Monday at a meeting addressing the city's annual capital improvement plan program. The entire system will cost about $620,000 to design and build, staff estimated.

The existing system has slowly failed to cool the more than 35-year-old building where some offices bake in 85 degree heat in the summer months.

At Monday's meeting, Community Services Director Dave Lykins said the city has tried to repair the system over the years but a total replacement is now necessary.

Councilman Gary Price wants to discuss an investment with such a high price tag on a building built in the 1970s.

"We don't know what the state of the building is," he said, adding that he hopes it has as many years left in it as a new air conditioner would.

"It's a large number to be confronted with," he said of the price. "I don't think staff did anything wrong. ... I think it's prudent to get some professionals in there to tell us what's wrong and what we're fixing."

Downtown apartment decision

Council is expected to decide whether or not to allow a downtown architect to add a small apartment onto the side of an existing gallery and office space.

Excerpt from:
Naples council to consider $120,000 contract for new city hall AC system

AUBURNDALE, Fla. - Saving money on electric bills just got a lot easier for homeowners interested in adding insulation to their attic and reducing their home's heating and cooling costs.

Attic Armor insulation from Fi-Foil Company, a product designed using advanced Gas Filled Panel (GFP) insulation technology, combines insulation R-value with radiant barrier performance to provide an easy to install do-it-yourself project.

GFP Insulation Technology was developed using the same proven technology used in low-e, argon gas-filled, double-paned and triple-paned windows. Attic Armor consists of multiple, honeycombed layers of thin, low-e metalized aluminum. These baffled polymer chambers are enveloped by a sealed barrier and filled with either air or a variety of inert gasses.

Fi-Foil has packaged the product for retail centers that do not have the room for bulky fiberglass or foam packaging. Attic Armor is packaged in 48 square foot boxes in two SKUs. The boxes are only 12" x 6" x 18" or 26". Two boxes easily fit in a shopping cart and will insulate a 10' x 10' room.

Fi-Foil licensed this GFP technology and perfected the manufacturing process for large-scale production. The company now holds the exclusive licensing rights to GFP technology for use in residential and commercial building applications.

GFP thermal insulation technology was funded by a grant from the U.S. Department of Energy, and developed by researchers at the Lawrence Berkeley National Laboratory. Attic Armor for residential installations and GFP Insulation(TM) for commercial applications utilize an advanced insulation technology. Attic Armor was named product of the year at the Global Insulation Conference & Exhibition held in Toronto during September 2011.

These sealed exterior aluminum foil barrier films provide thermal resistance, flammability protection, and properties to contain air or a low-conductivity inert

gas. GFP Insulation incorporates an advanced design and specially formulated components to effectively address the three methods of heat transfer: radiation, conduction and convection.

In addition to unique thermal characteristics, GFP Insulation is fiber-free, does not off-gas. It is mold resistant and will not absorb moisture, is packaged flat and expanded for installation, lightweight and easy to transport and install, and meets LEED and other Green Building Rating System requirements.

For further details, call Fi-Foil Company, Inc. at 1-800-448-3401, email info@fifoil.com, or visit http://www.gfpinsulation.com.

Continue reading here:
Fi-Foil's New Award-Winning GFP Attic Armor Insulation for D.I.Y.

12-06-2012 00:52 Contact us : Call us now : 720-366-1512 Website : Meiers Mechanical (M and M Heating & Air-conditioning) has been in business for over 14 years and is family owned and operated in Longmont, Colorado. We specialize in Furnace Installation, Furnace Repair, Air Conditioning Installation, Air Conditioning Repair. We service all brands, including Trane and Carrier. We install and service furnaces, A units humidifiers and all over HVAC components for Longmont, Boulder, Erie, Broomfield, Loveland, Lyons, Frederick, Johnstown and Fort Collins. We also offer 24/7 emergency service. Call us today!

Originally posted here:
M and M Heating and Air Conditioning - Video

TUCSON - If it's 'too good to be true', it usually is. And that is true with air conditioning services, according to the Better Business Bureau of Southern Arizona.

The BBB is warning Southern Arizonans to be wary of companies or contractors offering to install A/C units, or offering to tune up their existing units.

In 2011, the BBB received over 9,500 inquires from consumers about heating, ventilation and air conditioning (HVAC) contractors in Southern Arizona between May and the end of September.

Unfortunately, complaints against HVAC companies increase along with inquiries. As HVAC contractors ramp up their advertising, unscrupulous contractors often make misleading, or even false claims about the price of their services, and even the quality of the equipment they're selling.

Wade Hamstra, of Hamstra Heating and Cooling- a Tucson HVAC contractor doing business in Southern Arizona since 1983- says that there are a few "red flags" consumers can look for to ensure they're not being ripped off:

RED FLAG #1 - THE LOW-BALL PRICE: Ever see those ads that say '$39 Heating or A/C Tune-Up!'? Sounds great doesn't it? Don't be fooled: an average heating and cooling service technician makes at least $18 per hour. Add in the costs of fuel to get to the home, the service van, overhead expenses for a basic office- people to answer the phone, schedule calls, process paper- and the average HVAC company has, at a bare minimum, expenses of $50 per hour. When you add up all these expenses it's very unlikely you'll ever find a true $39 tune-up.

RED FLAG #2 - THE 400 SQUARE FEET PER TON OF A/C 'RULE OF THUMB': Just about any consumer who has researched buying a new A/C system has read about, or had a contractor tell them about the 'Rule of Thumb' for equipment sizing: "Mr. Johnson, your home is 2000 square feet, at 400 square feet per ton; you need a 5-ton air conditioning unit today." "This is the most bogus and lazy lie that exists in our industry," Hamstra says. "Every reputable heating and cooling company will insist on performing a Manual J Engineering Load Calculation- as required by the International Residential Code book, Tucson Electric Power and Energy Star- to determine the size of system you need. This process takes a lot of education and extra time to perform, but is essential for proper sizing. A system that is not properly sized will not keep a home comfortable, and will drive up energy bills at the same time it decreases equipment life."

RED FLAG #3 - NEW SYSTEM QUOTES OVER THE PHONE ARE NOT ACCURATE!: There is a large range of variables when performing a system replacement. For that reason it's virtually impossible for an A/C contractor to give an accurate estimate for a new system over the phone. Hamstra lists three reasons why it's not possible to give an accurate estimate over phone: 1. The home might have experienced changes since the original system was installed (new windows, added insulation, added addition, more internal heat loads like appliances, TV's, computers, people). All of these factors will affect the system size that the home needs. The only way to ensure proper sizing- which leads to better comfort, energy efficiency and longer system life- is to visit the home, take all the proper measurements and run a computerized Manual J Load Calculation. 2. There's the issue of physical unit sizes: the contractor may need to visit the home to make sure that it has the physical space needed for a new model A/C unit. 3. Any customer looking to get new air conditioning equipment should also be concerned with making sure their duct system is adequate. If the duct is overlooked, a customer may get sold a highly efficient and more expensive unit that functions like a lower quality unit, due to leaky ductwork. It would be like putting a brand new Ferrari motor on an old Yugo chassis. It is not going to deliver great results. In order to deliver a proper solution, A/C contractors need to inspect the system as a whole.

To find an HVAC contractor you can trust and to easily get free estimates scheduled through BBB's free E-Quote service, visit: http://www.tucson.bbb.org <http://www.tucson.bbb.org> or call: (520)888-5353.

More here:
BBB warns of A/C scams this time of year

TUCSON - The BBB of Southern Arizona wants to caution you, as summer temps are well into the triple digits, to be careful when shopping for a HVAC (Heating Ventilation Air-conditioning) unit and a contractor to install the unit.

There are the three major problems to look out for listed below in this warning released by the BBB:

An A/C unit or some sort of cooling system is more or less a necessity during Southern Arizona's hot summers. Every year BBB sees a dramatic rise in consumer inquiries during the spring and into the summer as consumers look for HVAC contractors to tune-up, replace, or install units.

In 2011 BBB received over 9,500 inquires from consumers about heating, ventilation and air conditioning (HVAC) contractors in Southern Arizona between May and the end of September.

Unfortunately, complaints against HVAC companies increase along with inquiries. As HVAC contractors ramp up their advertising, unscrupulous contractors often make misleading, or even false claims about the price of their services, and even the quality of the equipment they're selling. Wade Hamster, of Hamster Heating and Cooling- a Tucson HVAC contractor doing business in Southern Arizona since 1983- says that there are a few "red flags" consumers can look for to ensure they're not being ripped off:

RED FLAG #1 - THE LOW-BALL PRICE Ever see those ads that say "$39 Heating or A/C Tune-Up!"? Sounds great doesn't it? Don't be fooled: an average heating and cooling service technician makes at least $18 per hour. Add in the costs of fuel to get to the home, the service van, overhead expenses for a basic office- people to answer the phone, schedule calls, process paper- and the average HVAC company has, at a bare minimum, expenses of $50 per hour. When you add up all these expenses it's very unlikely you'll ever find a true $39 tune-up.

RED FLAG #2 - THE 400 SQUARE FEET PER TON OF A/C "RULE OF THUMB" Just about any consumer who has researched buying a new A/C system has read about, or had a contractor tell them about the "Rule of Thumb" for equipment sizing: "Mr. Johnson, your home is 2000 square feet, at 400 square feet per ton; you need a 5-ton air conditioning unit today." "This is the most bogus and lazy lie that exists in our industry," Hamster says. "Every reputable heating and cooling company will insist on performing a Manual J Engineering Load Calculation- as required by the International Residential Code book, Tucson Electric Power and Energy Star- to determine the size of system you need. This process takes a lot of education and extra time to perform, but is essential for proper sizing. A system that is not properly sized will not keep a home comfortable, and will drive up energy bills at the same time it decreases equipment life."

RED FLAG #3 - NEW SYSTEM QUOTES OVER THE PHONE ARE NOT ACCURATE! There is a large range of variables when performing a system replacement. For that reason it's virtually impossible for an A/C contractor to give an accurate estimate for a new system over the phone. Hamster lists three reasons why it's not possible to give an accurate estimate over phone:

1. The home might have experienced changes since the original system was installed (new windows, added insulation, added addition, more internal heat loads like appliances, TV's, computers, people). All of these factors will affect the system size that the home needs. The only way to ensure proper sizing- which leads to better comfort, energy efficiency and longer system life- is to visit the home, take all the proper measurements and run a computerized Manual J Load Calculation.

2. There's the issue of physical unit sizes: the contractor may need to visit the home to make sure that it has the physical space needed for a new model A/C unit.

Link:
BBB issues caution when shopping for A/C this summer