When a home suffers a water damage event, a mold infestation can quickly arise and spread throughout a home in 48-72 hours. Because mold can produce allergens and irritants, you will want a professional that has training and experience to properly resolve the mold infestation. If you suspect that your Gaylord home or business has a mold problem, SERVPRO of Gaylord & Cheboygan can inspect, assess and remediate your property.

Learn more about mold and what to do until help arrives by reviewing these mold damage tips.

Confusion and misunderstanding surround the topic of mold and mold remediation. Some restoration businesses even make claims to remove all mold from a building. This is a fallacy. Mold spores occur naturally almost everywhere, both indoors and outdoors. These microscopic spores float along in the air and can enter a home or business through windows and HVAC systems. Consider these facts:

Mold spreads quickly, so a minor mold infestation can quickly escalate into a major problem. Were dedicated to responding immediately when you contact us. A fast response lessens the damage, limits further damage, and reduces cost.

Learn More

We specialize in water and mold damage restoration, the cornerstone of our business. We have the training and expertise to safely handle any mold situation.

Learn More

Our advanced equipment helps to detect and stop the source of water feeding the mold. We then isolate the affected area using a negative air pressure chamber.

Learn More

Every mold infestation is different, from the amount of mold to the types of materials affected. Each scenario requires a unique solution, but the general process stays the same. The steps listed below illustrate our process for a typical mold remediation infestation:

Its easy to understand why many people struggle to grasp the facts and issues surrounding indoor mold because sensational news stories and advertising cloud and obscure the real issues. Educate yourself with the facts about mold and learn about the mold remediation process.

We live and work in this community too; we might even be neighbors. As a locally owned and operated business, SERVPRO of Gaylord & Cheboygan is close by and ready to help with your mold-damaged property. We are proud to be an active member of the Gaylord community and want to pitch in and help make our community the best it can be.

When a major storm or event occurs, we can call upon our national network of 1,700 SERVPRO Franchises and special Disaster Recovery Teams if we need additional resources or personnel.

We are proud to serve our local communities:

Read the original post:
Gaylord, MI Mold Removal and Mold Remediation | SERVPRO of ...

It only takes a small water leak, or even excess humidity, for mold to form in your Fayetteville home or business. Then, mold can spread quickly through the property in as little as 48 hours. Mold can produce allergens and irritants, and it has the potential to cause other health effects. If your home or business has a mold problem, we can inspect and assess your property and use our specialized training, equipment, and expertise to remediate your mold infestation.

Learn more about mold and what to do until help arrives by reviewing these mold damage tips.

Some restoration companies advertise mold removal and may even guarantee to remove all mold. This is a fallacy because removing all mold from a house or business is impossible; microscopic mold spores exist almost everywhere, both indoors and outdoors. Here are the facts:

In as little as 48 hours, a minor mold issue can quickly spread through a home or business. Once you contact us, were dedicated to starting the remediation process quickly. This fast response lessens the mold damage, limits additional damage, and reduces the remediation cost.

Learn More

We specialize in water and mold damage restoration, with advance training in restoration techniques and the experience and specialized equipment to quickly restore your property.

Learn More

We invest in the latest equipment and ongoing mold remediation training because it helps us restore your home or business quickly and effectively. We will isolate the affected area using physical barriers and a negative air pressure chamber.

Learn More

Every mold damage scenario is different, and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our typical process:

Its easy to understand why many people struggle to grasp the facts and issues surrounding indoor mold because sensational news stories and advertising cloud and obscure the real issues. Educate yourself with the facts about mold and learn about the mold remediation process.

SERVPRO of Fayetteville is locally owned and operatedso we live and work here too and are proud to be part of this community. We are proud to provide mold remediation services in our local communities:

We proudly serve Fayetteville, NC, Hope Mills, NC, and surrounding areas.

Go here to see the original:
Mold Remediation and Restoration - Servpro of Fayetteville NC

Faster Than Traditional Sanding/Scrubbing

Dry ice blasting kills and removes mold spores from wood between 60 to 80% faster than traditional cleaning methods because it is capable of getting in hard to reach places such as in crevices, around nails and screws, and places that would be difficult for hands or tools to reach. The range of available nozzles for dry ice blasting equipment enables operators to access tight corners quickly, and in many cases, clear mold from areas inaccessible to hand tools, such as inside corners of wood framing trusses and joists. Dry ice can be safely blasted around wiring, plumbing, and pipe fixtures without causing damage to them. Dry ice blasting accomplishes mold remediation faster and more completely than mechanical abrasion.

Three technicians using the traditional methods of sanding, scraping and spraying a mold infested attic, would typically complete an attic job in five or six working days. However using dry ice blasting, two technicians can complete that very same job in two days. Due to the speed and effectiveness of dry ice blasting, mold removal will take a fraction of the time when compared to traditional methods. Therefore, residents have lower displacement costs and dry ice is environmentally friendly and non-toxic.

Unlike other methods that simply wash away surface mold and mildew, the low temperature of dry ice (-110 degrees) kills mold and mildew on contact. Dry ice blasting quickly permeates deeply into wood and other surfaces to remove mold spores without the need for expensive and often ineffective solvents. The dry ice blasting process also eliminates the need for laborious sanding and scraping. Dry ice blasting does not require toxic chemicals and does not create a toxic dust hazard from remediation operations.

The only way to ensure mold spore removal from wood is through dry ice blasting. Crystal Soda Blast has been using dry ice to eliminate mold from wood framing for over 2 years now with great success. Every post remediation verification test performed by an Industrial Hygienist on Crystal Soda Blast jobs have been completely successful.

Benefits:

How it Works

Dry ice blasting for mold remediation uses four physical properties of air-propelled dry ice pellets:

Successful mold removal from a building requires the source of the mold and moisture to first be eliminated. The existence of mold in a building is the symptom of much larger problem with moisture. A mold needs food, such as wood, moisture, and a temperature range favorable to the growth of the specific mold organism. As any good contractor knows, eliminating the moisture problem is the only way to assure the mold will not return.

Once the moisture problem has been solved dry ice blasting is the best solution for removing mold. Mold can cause a great deal of health problems and can severely damage the integrity of a building's structure. So, removing the mold in its entirety is vital to any mold remediation project. Grinding, sanding, or wire-brushing to remove mold growth does not sanitize the surface and kill the mold spores without the application of a biocide which requires additional time and labor is required to apply. Dry ice blasting will almost rid the need for biocides and thus enhances worker safety, in addition to the obvious labor savings.

Once the mold infected area has been contained severely damaged carpet and drywall should be double bagged and discarded. Next, dry-ice blasting can be utilized to clean the plywood and support beams. The blasting gun can easily be managed to target the desired mark. Specific nozzle types best suited for cleaning wood can be utilized, e.g. a fan-shaped nozzle, creating a pattern several inches wide, can be used to "sweep up and down boards and beams. The dry ice being fired on the wood can remove mold in a way that is clearly visible and in a methodical manner. Only severely stained wood will continue to show a stain but this area has been sanitized. Once the blasting phase is complete and all surfaces have been vacuumed and cleared of sawdust and other debris, mold remediators can follow up by applying an organic or micro-biocide spray to remediated areas to inhibit future growth.

The unpleasant and uncomfortable process of squeezing into tight corners to sand the mold off of wood trusses and joists, only to have mold spores remain, is soon to become a thing of the past. Dry ice blasting provides for complete spore removal from wood. This means that the use of biocides and encapsulation can be drastically reduced or eliminated, as these registered pesticides were used as a back-up method to kill and contain left over mold spores. However, dead mold is still an allergenic and must be removed which is done with a HEPA vacuum.

Chemical biocides dont always eliminate the allergens (called metabolites) which are responsible for the allergic reactions associated with the mold. Also, biocides are typically harmful to those using them (they are not recommended for routine use by EPA or OSHA). Sandblasting is too abrasive to the underlying surface. Water and steam blasting do not provide a thorough clean and there is a greater chance of mold regeneration due to moisture. And while soda blasting provides an effective clean, it leaves behind a rather messy secondary waste stream (an issue that doesnt come up with dry ice sublimation).

(Note: the attic should be free of all insulation prior to our arrival.)

For the dry ice blasting we charge by the day and would blast the entire attic. We do this to remove and kill any non-visible mold. Then after cleaning, we go back and apply the anti-fungal with a sprayer over the whole attic to prevent future problems.

Why not just spray everything down with bleach? If you carefully read the cleaning instructions on any Tilex or Clorox productions youll notice that they are only good for non-porous surfaces. This is great for regular daily cleaning of the tile in your bathroom but does not work on the wood studs and plywood in your attic or crawlspace as these are porous surfaces. Bleach is mostly made up of water and the last thing you want on your wood is more moisture to give the mold something to grow on. It also doesnt get at the "root of the mold, nor does it remove the mold spores from the surface. The allergen remains after you are done changing the molds color.

During a cold snap, this house's pipes burst causing the basement to flood. Black mold grew on the dry wall and studs. After the dry wall was removed we used dry ice to kill and remove the mold. The clean up was minimal since the dry ice sublimates on contact.

We used dry ice to remove mold from this residential attic in Poulsbo. In closed spaces like these, if there isn't enough ventilation, our crew will use supplied air while working.

More information on mold:

Dry ice blasting is great for mold remediation projects and comes highly approved by industrial hygienists.

Read more:
Mold Remediation Crystal Soda Blast

Mold Remediation TitusvilleFL Call 844-660-0010 Today!

Examining mold growth entails greater than simply checking out what's visibly growing on the wall surfaces or in a corner. Mold can be an unnoticeable trespasser, expanding behind and around what you initially see. Such unscrupulous actions requires curious reasoning.

First, recognize that behind all mold growth is a water or dampness issue. Second, end up being a master of moisture-- know where moisture comes from and how it gets involved in the home. The best objective of these two steps is for service warranty agents to identify a moisture resource as well as use its location to aid situate all mold development, not simply what's quickly noticeable.

Since microscopic mold spores exist normally nearly all over, indoors as well as outdoors, eliminating all mold from a home or service is difficult. Some remediation businesses promote "mold elimination" and also assure to get rid of all mold. This is a fallacy.

When water horns in your home, mold growth can begin in just two days. Take into consideration the adhering to mold facts:

Mold exists virtually anywhere, indoors and also outdoors.Mold spores are microscopic, float along in the air, and may enter your home with home windows, doors, or AC/heating systems and even hitch a ride inside on your apparel or a pet.Mold spores prosper on wetness. Mold spores can promptly turn into colonies when subjected to water. These colonies may create allergens and irritants and also have the prospective to create various other health impacts.Prior to mold remediation can begin, any type of sources of water or wetness must be attended to. Or else, the mold might return.Mold often creates a strong, moldy odor, and that odor can lead you to feasible mold trouble areas.Also higher-than-normal interior moisture can support mold growth. Maintain interior humidity listed below 45 percent.

Mold Remediation TitusvilleFLBest Mold Remediation TitusvilleFLBlack Mold Remediation TitusvilleFLTop Mold Remediation TitusvilleFLMold Remediation TitusvilleFL Near MeMold RemovalBlack Mold Removal

#moldremediation #moldremoval

See the rest here:
Mold Remediation Titusville FL | See This Vid If You Have Mold Troubles

Mold has had its 15 minutes of fame over the last few years. Though the hype has died down, mold is still an important issue. Customer complaints require home builders to have a fast action plan; both to clean up the mold problem and to show customers a quality home builder is looking out for their health and safety and the durability of their home.

There are two important things to remember about mold: prevent it by doing things right the first time and when you do face mold, take care of it immediately. Ensuring that your warranty team follows a process for mold remediation will take care of the latter.

The following steps, which can be adapted to fit within your company's policy, serve as a basic process for quickly remediating mold problems.

Assessing mold growth involves more than just looking at what's visibly growing on the walls or in a corner. Mold can be an invisible intruder, growing behind and around what you first see. Such devious behavior requires inquisitive thinking.

First, understand that behind all mold growth is a water or moisture problem. Second, become a master of moisture know where moisture comes from and how it gets into the home. The ultimate goal of these two steps is for warranty representatives to identify a moisture source and use its location to help locate all mold growth, not just what's immediately visible.

Before you begin remediation, document the mold situation with writing, photos and video. The warranty team supervisor will use the documentation to develop a remediation plan, which typically answers questions like when work is slated to begin, when that work is scheduled to be completed, who will be performing the remediation, any testing that should be done, and if homeowners will be temporarily relocated. In the longer term, the documentation can help manage liability for your company or point to larger trends in mold growth.

Mold may not always grow in one area, so you need to figure out how much contamination you're really looking at. Calculating the extent of the contamination will impact how you approach mold removal and clean up. The goal of mold remediation is to clean up mold growing within the home, and to avoid exposing homeowners to large amounts of mold.

The New York City Department of Health (NYC DOH) has developed guidelines for cleaning up mold contamination. These guidelines are widely used in the construction industry and recommend six levels of mold remediation based on the square footage of the mold and whether or not the mold is located within the home's HVAC system. Following the NYC DOH's guidelines, available online, calculate the remediation level needed.

Remediation will always involve cleaning up existing mold while avoiding exposure to oneself as well as homeowners, as well as preventing new growth by addressing the moisture source. Based on your calculation of the contamination area, determine if you're working in an area up to 30 square feet (approximately the size of a full sheet of drywall). If so, you'll be following the guidelines for remediation levels 1 and 2. Level 1 remediation is used for small, isolated areas of mold up to 10 square feet and Level 2 remediation covers square footage from 10 to 30 square feet.

The clean up process is the same for Level 1 and Level 2 mold remediation and comprises these steps:

Reference the remediation plan during the actual remediation to make sure it's being followed. If additional mold is discovered during the clean up, the warranty supervisor should update the plan.

For contamination areas greater than 30 square feet, many builders hire outside mold remediation firms to perform the clean up. In this case, you and your team switch from actually performing mold remediation to supervising a qualified contractor. Having a general understanding of the proper procedures an outside company should be following is useful. The NYC DOH guidelines address such procedures for Level 3 contamination and above.

Just because the mold is gone and there's no dirt or dust doesn't mean that you're done. Your last step is to determine if your clean-up efforts have been successful. While this last step is a judgment call, there are some options and guidelines to follow.

The EPA document, Mold Remediation in Schools and Commercial Buildings, is a great resource that provides guidelines for helping you complete your clean up efforts. Some of these guidelines include:

Depending on your company and the specific details of a mold problem, additional testing by an environmental testing company may be performed after the clean up to verify that all mold has been removed.

When it comes to mold, the key is to implement a comprehensive moisture management strategy. Potential liability and health issues from mold can be dramatically decreased by doing it right the first time. Clean up must be immediate and thorough, following a process like the above steps. It may sound over-simplified, but the primary failure in response to homeowner complaints is simply the fact that builders don't respond fast enough, or with the emphasis that the issue is potentially serious.

Minimum personal protection equipment for levels 1 and 2 remediation includes an N95 respirator, eye goggles without vents and rubber gloves that extend to mid-forearm.

Following an immediate and thorough remediation plan is essential for getting rid of the mold and showing your customers you're committed to acting quickly.

Before entering a home to assess a mold growth situation, make sure you have the necessary personal protective equipment.

Read more here:
Five Steps to Proper Mold Remediation | Professional Builder

Think you might have a mold problem? Then we have the possible solution. Ocala families and businesses have been calling on SERVPRO of Ocala to help with mold cleanup for years.Every week we respond to calls from Ocala, Fl.to The Villages, Fl. Our trained and trusted SERVPRO professionals inspect for water damage because where there is water damage mold can sometimes be discovered. Please see our blog moldphotos, before after photos of mold clean up success stories. Please read our customer testimonies and you will be convinced SERVPRO of Ocala is the right choice to help rid your home of mold.

Confusion and misunderstanding surround the topic of mold and mold remediation. Some restoration businesses even make claims to remove all mold from a building. This is a fallacy. Mold spores occur naturally almost everywhere, both indoors and outdoors. These microscopic spores float along in the air and can enter a home or business through windows and HVAC systems. Consider these facts:

In as little as 48 hours, a minor mold issue can quickly spread through a home or business. Once you contact us, were dedicated to starting the remediation process quickly. This fast response lessens the mold damage, limits additional damage, and reduces the remediation cost.

Learn More

We are trained mold damage specialists who get started quickly to get your home or business back to normal, with specific training and certifications to handle your restoration needs.

Learn More

Our advanced equipment helps to detect and stop the source of water feeding the mold. We then isolate the affected area using a negative air pressure chamber.

Learn More

Every mold infestation is different, from the amount of mold to the types of materials affected. Each scenario requires a unique solution, but the general process stays the same. The steps listed below illustrate our process for a typical mold remediation infestation:

Its easy to understand why many people struggle to grasp the facts and issues surrounding indoor mold because sensational news stories and advertising cloud and obscure the real issues. Educate yourself with the facts about mold and learn about the mold remediation process.

We live and work in this community too; we might even be neighbors. As a locally owned and operated business, SERVPRO of Ocala is close by and ready to help with your mold-damaged property.

If a catastrophic storm or event occurs, we can call upon the resources of a national network of over 1,700 SERVPRO Franchises and special Disaster Recovery Teams strategically located throughout the country to respond to large scale disasters.

We proudly serve Ocala, FL, Anthony, FL, and surrounding areas.

Read more:
Ocala, FL Mold Removal and Mold Remediation | SERVPRO of Ocala

Mold Removal in Maryland | Inspection, Testing & Remediation

From Frederick, MD to Washington, DC and Rockville to Columbia, every inspection must begin as a general hypothesis or set of assumptions. Without one, the cost and scope of the inspection would quickly spiral out of control. Remember, the hypothesis does not always assume a mold problem. Often, potential home buyers hire a mold inspector to ensure that a mold problem is not occurring. There are many factors that will contribute to the impressions of the subject home.

Questions that may be considered include:

After a visual assessment, every potential mold remediation project will then continue withtestingof air quality and affected organic material in the subject property area of contamination. Based in Gaithersburg and Frederick, MD and serving Hagerstown, Rockville, Laurel, Columbia, and surrounding areas, wehave over 25 years of experience in serving homeowners of central Maryland.

Problem:Lightmoldgrowth occurring on bathroom ceiling.

Problem:Moderatemoldgrowth occurring on roof sheathing in attic.

Problem: Heavymoldgrowth noted on upper wall and ceiling in bedroom.

Problem:Refrigerator supply line leaked for several weeks, leading to water damage andmoldgrowth.

Continue reading here:
Mold Remediation MD | Frederick, Hagerstown, Gaithersburg

From initial inspection to the final coat of paint, NERS provides complete solutions for mold, fire and water damage restoration, as well as improving the indoor air quality of your home or business.

With over 10 years of servicing New Hampshire, Vermont, and Maine with mold testing, remediation and restoration services, our business has been built on honesty, a fair price, and effective results. The team at New England Remediation Services is fully licensed, insured, and trained in the field of mold abatement and improving your indoor air quality:

Your health is our number-one concern. Thats why we have invested in state-of-the-art remediation equipment to efficiently and effectively remove toxic mold from residential homes and commercial businesses. Having toxic mold present in an indoor environment can quickly impair the health of those that live or work there. How do we know this? It happened to us.

Our story. When our daughter Kaleigh started 8th grade, she started coming down with migraines and nausea. She would break out into a rash at times and be very lethargic. We kept her home from school, and in a few days shed feel better, so we sent her back to school only to have her get sick again. Kaleigh lost 120 days of school until we discovered the problem. There was a vent over her locker that was loaded with toxic black mold.

Seeing what Kaleigh went through gave us a cause to use what we had learned about toxic mold to prevent this from happening to others. In 2007 we transitioned our Concord-based construction company into New England Remediation Services and we have been crusaders against mold ever since!

Done once, done right. Our method of removing mold is the most effective and non-toxic approach available today. As opposed to simply spraying a biocide, dry ice blasting removes 99.9% of the mold spores from the infected area on contact. Then we treat the surface with a nontoxic biocide agent to prevent regrowth. Our proposals always include the cost to put it all back together no need to get a separate quote for reconstruction!

Go here to see the original:
New England Remediation Services | Mold, Water and Fire Damage

Mold can produce allergens and irritants and has the potential to cause other health effects. Mold can spread quickly through your Bremerton home or business in as little as 48 hours. If you suspect that your home or business has a mold problem, we can inspect and assess your property. If mold is found, we have the training, equipment, and expertise to remediate your mold infestation.

Learn more about mold and what to do until help arrives by reviewing these mold damage tips.

Confusion and misunderstanding surround the topic of mold and mold remediation. Some restoration businesses even make claims to remove all mold from a building. This is a fallacy. Mold spores occur naturally almost everywhere, both indoors and outdoors. These microscopic spores float along in the air and can enter a home or business through windows and HVAC systems. Consider these facts:

Mold spreads quickly, so a minor mold infestation can quickly escalate into a major problem. Were dedicated to responding immediately when you contact us. A fast response lessens the damage, limits further damage, and reduces cost.

Learn More

We specialize in water and mold damage restoration, with advance training in restoration techniques and the experience and specialized equipment to quickly restore your property.

Learn More

We invest in the latest equipment and ongoing mold remediation training because it helps us restore your home or business quickly and effectively. We will isolate the affected area using physical barriers and a negative air pressure chamber.

Learn More

Every mold infestation is different, from the amount of mold to the types of materials affected. Each scenario requires a unique solution, but the general process stays the same. The steps listed below illustrate our process for a typical mold remediation infestation:

With sensational news stories and misleading advertising, you can easily understand why so many people are misinformed about indoor mold. Learn the facts about mold and the mold remediation process.

We live and work in this community too; we might even be neighbors. As a locally owned and operated business, SERVPRO of Kitsap County is close by and ready to help with your mold-damaged property.

If a catastrophic storm or event occurs, we can call upon the resources of a national network of over 1,700 SERVPRO Franchises and special Disaster Recovery Teams strategically located throughout the country to respond to large scale disasters.

We are proud to serve our local communities:

See the rest here:
Bremerton, WA Mold Removal and Mold Remediation | SERVPRO of ...

Aware of molds vicious cycle and sensitive to a homeowners distress and health concerns, we understand that mold is a quiet but very real emergency. We recognize that the invasion of mold not only eats away at property, but can jeopardize human health, and we do whatever it takes to remove this hazard with minimal disruption to the occupants. Our mold remediation process benefits property and people.

PuroClean specializes in mold remediation. As a mold remediation company, we do not provide mold testing services. The company that does your mold testing should not do the remediation. While we work will many Indoor Environmental Professionals (IEP) who do provide testing services, it is an industry conflict of interest for one company to do the mold testing and then do the remediation on the same home/business. Some companies provide both testing and remediation services together, but homeowners/business owners should be aware that a conflict of interest does exist.

If you are unsure if you have a mold problem (if you can not see the mold), or if you have a large scale mold problem, the services of an Indoor Environmental Professional (IEP) should be employed. Smaller areas of concern do not always necessitate the need for an IEP. An IEP can provide a thorough inspection, conduct testing, and provide a protocol for remediation. Additionally, after the remediation process is completed, the IED should come back to conduct a post test (or clearance test) to verify that the mold was properly remediated. If you do employ an IEP, simply provide us with the protocol and lab results and we will gladly provide you with a free remediation estimate (within our service area).

Mold depends on moisture for survival and grows in environments where it is dark, no air movement, organic food is present (paper, wood), and the moderate temperature is 68-86. Within 24-48 hours under ideal conditions mold will grow.

Mold develops where there is excess water and moisture. The most effective way to protect your family and property from the threat of mold is to have it dried immediately by a professional mitigation company. PuroClean offers mold removal services to stem the tide of mold, as well as cleaning and sanitation, including mold and mildew odor removal to restore your home or business to its original state. Our professional deodorization techniques erase mold and mildew odors. Removal of mold and mildew can be a serious endeavor, and PuroClean has the expertise and technology for the job.

Step 1: Identify Water Source

The first step in any mold remediation, and a crucial step, is to deal with the underlying water situation. Mold is always related to water, so a search for mold will always begin by using professional meters and expertise to look for unwanted water under cabinets or inside of walls, etc. If the source of the water is not fixed, then mold will return regardless of any effort by a remediation company.

Step 2: Inform Property Owner

The property owner should be offered the opportunity to consult with a qualified Indoor Environmental Professional (IEP) who can help evaluate the situation and who will write the protocol that the remediation professional will follow. It is impossible to determine the type of mold by looking at it. Stacybotrys is black, but so are many other species of mold. If someone wants to know the specific molds present then a sample must be sent to a qualified laboratory for evaluation. The standard we follow allow the professional remediation company to deal with small areas of visible mold without the necessity of requiring an IEP. When the area of visible mold is larger, then they do require an IEP to be involved in the process.

Step 3: Remediate the Mold

For a remediation professional, it is important to treat every mold contamination as a serious matter. Mold should be remediated and the environment returned to a dry state. Remediation efforts are the same, regardless of the type of mold involved. Remember, the professional is treating all mold as hazardous, so the procedures and processes and safety precautions are the same in most cases.

Step 4: Clearance Test

At the end of every mold remediation, regardless of the size of the restoration, a mold test should be taken by a qualified mold testing company and sent to a laboratory for analysis. The reasonable standard that is normally used to evaluate the sample is that the mold counts be less than outdoors. Since we live in an interactive world and the outside comes in every time we open the door, the fact that our remediation area is less than the outside indicates that the remediation was successful.

Read Our Reviews

Need Immediate Help?24/7 Emergency Service AvailableWe Are A Preferred Vendor of Major Insurance CarriersCall Now 201-261-0162

See the original post here:
New Jersey Mold Remediation & Cleanup | PuroClean