Unfortunately, it doesn't take much for mold to begin to form. All that is needed is a small water leak, or even just excess humidity for mold to begin to grow. Mold can also begin to spread throughout your residential or commercial property in as little as 48 hours. Mold can produce irritants and allergens that can be very harmful to you and the people around you. That is why it is crucial to call SERVPRO of Tyler as soon as you discover or suspect mold on your property.

Our team will quickly respond and if mold is found, we have the training, equipment, and expertise to remediate your mold infestation!

Learn more about mold and what to do until help arrives by reviewing thesemold damage tips.

Some restoration companies advertise mold removal and may even guarantee to remove all mold. This is a fallacy because removing all mold from a house or business is impossible; microscopic mold spores exist almost everywhere, both indoors and outdoors. Here are the facts:

In as little as 48 hours, a minor mold issue can quickly spread through a home or business. Once you contact us, were dedicated to starting the remediation process quickly. This fast response lessens the mold damage, limits additional damage, and reduces the remediation cost.

Learn More

As water and mold damage specialists, we have the experience, the expertise, and the advanced training that enables us to get your property restored quickly and thoroughly.

Learn More

We invest in the latest equipment and ongoing mold remediation training because it helps us restore your home or business quickly and effectively. We will isolate the affected area using physical barriers and a negative air pressure chamber.

Learn More

Every mold damage scenario is different, and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our typical process:

Its easy to understand why many people struggle to grasp the facts and issues surrounding indoor mold because sensational news stories and advertising cloud and obscure the real issues. Educate yourself with the facts about mold and learn about the mold remediation process.

SERVPRO of Tyler is locally owned and operatedso we live and work here too and are proud to be part of the Tyler community. When you have a water or mold damage issue, were already nearby and ready to help.

We are also part of a national network of over 1,700 SERVPRO Franchises and special Disaster Recovery Teams strategically located throughout the country to respond to large scale disasters.

We are proud to serve our local communities:

See the article here:
Tyler, TX Mold Removal and Mold Remediation | SERVPRO of Tyler

For many New Jersy residents, mold remediation is a difficult process to understand. Making it even more difficult is the stress that is often involved when dealing with such a major home problem. Simply, mold remediation is a process that seeks to remove any and all appearances of mold growth or spores in a home. At Above and Beyond, our mold remediation experts can assist you with halting the spread of mold in your home and preventing it from happening again.

The team at Above and Beyond know that we are not your only choice when it comes to mold removal experts. That is why we take great pains to help potential clients understand the difference between us and several other "providers" out there. The process of mold remediation is not actually something that is regulated by the government, which means that there are a lot of providers who claim to be experts in the field, but really aren't. These companies may claim to have qualified mold remediation experts, but they likely lack the kind of certifications that our professional inspectors do.

We want to help you avoid the kind of poor results and lackluster service that many families receive when they trust a mold cleanup NJ company like this. More often than not, we see these families come into our business asking for help after they have already spent a great deal of time and money on something that could have been simple and stress-free.

You're likely struggling right now, and you need a helping hand to get you through. All you have to do is call us today at (732) 490-5900, and our qualified team of certified mold remediation experts take care of your mold problem.

The great thing about Above and Beyond is that we are an IICRC, EPA, and MICRO-CMRC certified company. We know exactly what it takes to get the job done and get it done right. We have been assisting clients just like you since our founding in 1998, and our history of satisfied clients speaks for itself. It is because of our commitment to our clients, our 5-year warranty on encapsulated materials, our professionalism, and our years of experience that have allowed us to be ranked as an A+ company with the Better Business Bureau for several consecutive years.

As a reputable mold remediation company, we have done everything within our power to adhere to each and every regulation and guideline set down by the EPA. When we complete a mold remediation at your home, you can rest assured that we utilize only the best EPA-registered mold disinfectants and encapsulates in our work.

This process is important. If you don't have the right professional using the correct tools during your mold remediation, you could be in a world of trouble. The guidelines set down by the EPA allow us to know and utilize the proper equipment to handle your specific mold problem, and help us to prevent you from ever having to go through this again in the future.

When you consider Above and Beyond as a service provider, we want you to know that we are not just a mold cleanup service. We actually provide our customers with a long list of mold-related construction services, including:

Whatever your mold or cleaning needs are, we can do it all. If you are ready to get started on tackling your difficult mold or cleaning project, call us now. Our team of experts is available to answer any of your questions today. All you have to do is call us at (732) 490-5900, or you can send us your information via the Contact Us page on our website.

The rest is here:
Certified Mold Remediation, Removal & Cleanup services in New ...

Water Mold Fire Restoration is a trusted source for professional mold removal. A more appropriate term to be used is actually mold remediation because there are times when someone can easily remove mold by themselves but that is a whole other topic. Here we are going to talk about the various steps that need to be performed when an indoor environment has mold growth on porous building materials and/or elevated levels of mold in the air. The explanations of each step will be a bit brief here but you can click on each step to learn more specifics.

Mold Inspection

Sometimes performed by an outside third party mold inspector but also available from Water Mold Fire Restoration. A mold assessment should include at the very least a visual check of a property and use of moisture detection tools like moisture meters and thermal imaging cameras. The goal of the mold inspection is to determine if a mold problem is present, what is the source and approximately how much area is affected.

Mold Testing

If there is no visible mold present, a mold problem could still be possible. However, the only way to confirm this is to take air samples to see what the mold levels are in the air. If visible mold is present on building material like drywall, you can typically skip this and go directly toward mold remediation. Mold Testing can still help determine the extent of the problem it does offer useful information; many people simply prefer to not spend the additional funds on it.

Estimate and Work Authorization

After the mold inspection, one of our estimators will put together a bid to perform the mold remediation including the price and terms for what constitutes a completed job. The client and Water Mold Fire sign the contract and a start date is set.

Mold Remediation Steps

Personal Protective Equipment

Technicians wear minimum of n-95 respirator and gloves during work. In some cases a full face mask and tyvek suit is necessary. These safety precautions are especially necessary because these technicians are working in these conditions on a regular basis.

Containment

Unless work is being performed throughout the property, a containment or temporary room will be setup. When removing mold, we are actually increasing the amount of mold in the air during demolition and a containment keeps these mold spores within a designated area.

Equipment Setup

Well setup air scrubbers to filter out these excess mold spores and in cases where building materials like framing are still wet, dehumidifiers and fans. Recently we have also began to implement hydroxyl generators as well but that is typically after demo and cleaning.

Demolition

When mold is present on porous materials like drywall and carpet, this building material needs to be removed and discarded. Our technicians typically go 12-24 past any visible mold or whatever amount would make for an easy rebuild.

Antimicrobial Cleaning

Building material like framing that is infested with mold but cannot be removed is treated with anti-microbial to kill all mold colonies and staining. Typically we use the most eco friendly product that will get the job done properly, this often calls for strong/caustic products that should only be handled by professionals when problems are severe.

All non-porous surfaces within the containment like tile, marble, etc are wiped down to remove and mold spores that may have settled from being around elevated conditions. All areas are also HEPA vacuumed before and after cleaning.

Fogging

An Ultra Low Volume (ULV) Fogger is used to spray anti-microbial and help treat the high amount of mold spores in the air.

Final Cleaning & Time

The containment stays up and air scrubbers remain for 48-72 hours to filter out remaining excess mold spores. Depending on the severity of the issues we may need to come back on day 2 to do another pass through with cleaning and fog.

Post Remediation Clearance Testing

After we deem work complete, clients have the option to contract a third party mold inspector to perform mold testing and get a Clearance Letter. Water Mold Fire Restoration guarantees work to pass these clearance tests or we will perform additional work at no cost and pay for a secondary clearance test as it should not fail. This must be done while containment is up and air scrubbers have been turned off. As soon as containment is taken down, job is deemed complete.

Originally posted here:
Mold Removal : Learn more about Professional Mold ...

Call Us Now! 317-837-6665

A mold remediation is recommended when there is enough mold damage to be of danger to the people that frequent the property or the propery itself. Mold and mildew only needs three things to grow oxygen, food, and water. Since oxygen is almost anywhere above sea level and mold eats almost any surface, the secret to mold prevention is moisture control. If a water intrusion of any kind does happen inside of your home or business, it is important that the water dries within 48 hours. This is typically the amount of time that it takes before a contamination problem occur. If it does grow and you need a professional mold remediation company, you can count on us!

If your home or business is contaminated, you should get a mold remediation immediately. Even a small amount can be dangerous. A specific danger level has not been set by governments because its effects on most people are different. One person may have minor affects, while another person in the same property may have major reactions.

So why do we suggest for you to get rid of any amount of mold even though theres no law to determine a danger limit? Well, although the effects on people may vary, long term exposure is likely to cause harm to most people. Some effects may not present themselves for years and can cause doctors to mistake the symptoms as another illness.

For example: a person can move into a moldy home and ignore the problem because it doesnt seem to cause any harm. Years later, this person begins to suffer from memory loss and his doctor mistakes the memory loss as a part of the aging process. As a result, more symptoms begin to reveal themselves since long term exposure weakens the immune system and lungs. Furthermore, he grows very ill and encounters a number of health problems that could affect him for the rest of his life. This is a scenerio that could have been avoided with a simple mold remediation.

So to be safe, any time there is active growth, you should consider a mold remediation. Also, keep in mind that there is no such thing as a good or a safe mold that grows indoors.

Mold has the ability to grow almost anywhere in your home or business. It thrives in temperatures that humans are also comfortable in and can eat most of the objects in your home. The only missing ingredient is moisture. Once moisture enters an area and stays for a few days, that area is likely to become contaminated. The areas in your home or business where moisture and humidity levels are high includes the crawl space, attic, closets, basement, kitchens and bathrooms. These are areas where you should keep your eye on, yet remember that it could grow in any room of the property.

When your home or business becomes contaminated, there are usually two options. These options include hiring experts and doing it yourself. So, how do you decide? The decision comes down to the amount of contamination. If the affected area is 9 square feet or smaller, the EPA states that do-it-yourself methods can be effective; however, we recommend a mold remediation if mold covers more than 9 square feet. Also, you should consider a mold remediation if older people, babies or someone with a weakened immune system are in the property often.

We know and understand that if the mold remediation steps are not done properly, then it can return. Our process ensures a proper mold removal.

As a professional mold removal company, American Mold Experts would advise anyone that has a known contamination problem in their home or business to take care of it as soon as possible. Mold carries many dangers that could cause health problems ranging from nausea to death. Infants, older adults, pregnant women and anyone with a weak immune system have a much higher risk at suffering from an illness.

American Mold Experts offers mold services throughout the Central Indiana area.

If your city is not listed, feel free to give us a call to see if we service your area!

Read the original post:
Mold Remediation Indianapolis - American Mold Experts

Mold (Welsh: Yr Wyddgrug) is a town and community in Flintshire, Wales, on the River Alyn. It is the administrative seat of Flintshire County Council, and was the county town of Clwyd from 1974 to 1996. According to the 2011 UK Census, it had a population of 10,058.[1]

The name "Mold" originates from the Norman-French mont-hault ("high hill"). The name was originally applied to the site of Mold Castle in connection with its builder Robert de Montalt, an Anglo-Norman lord. It is recorded as Mohald in a document of 1254. The Welsh-language place name of Yr Wyddgrug is recorded as Gythe Gruc in a document of 12801281, and comes from the words yr (the), gwydd (tomb, sepulchre) and crug (mound).

A mile west of the town is Maes Garmon, ("The Field of Germanus"), the traditional site of the "Alleluia Victory" by British forces led by Germanus of Auxerre against the invading Picts and Scots, which occurred shortly after Easter, AD 430.[2]

Mold developed around Mold Castle. The motte and bailey were built by the Norman Robert de Montalt in around 1140 in conjunction with the military invasion of Wales by Anglo-Norman forces. The castle was besieged numerous times by the Princes of Gwynedd as they fought to retake control of the eastern cantrefi in the Perfeddwlad (English: Middle Country). In 1146, Owain Gwynedd captured the castle. By 1167, Henry II was in possession of the castle, although it was recaptured by the Welsh forces of Llywelyn the Great in 1201.

Anglo-Norman authority over the area began again in 1241 when Dafydd ap Llywelyn yielded possession of the castle to the de Montalt family. However, he recaptured it from the Plantagenet nobility in 1245. The next few decades were a period of peace; Llywelyn ap Gruffudd built the Welsh native castle of Ewloe further to the east establishing the House of Gwynedd's military control over the area. Under Welsh rule, Mold Castle was deemed to be a "royal stronghold". It was recaptured by the forces of Edward I during the first months of the war of 127677. Mold Castle was still a substantial fortification at the outbreak of the rebellion by Madog ap Llywelyn in 1294. However, with the death of the last Lord Montalt in 1329, the castle's importance began to decline. The last mention of the fortification is in Patent Rolls from the early 15th century.

With the end of the Welsh Wars, English common law was introduced by the Statute of Rhuddlan. This led to an increase in commercial enterprise in the township which had been laid out around Mold Castle. Trade soon began between the Welsh community and English merchants in Chester and Whitchurch, Shropshire. During the medieval period, the town held two annual fairs and a weekly market, which brought in substantial revenues, as drovers brought their livestock to the English-Welsh border to be sold.

Nevertheless, tensions between the Welsh and the English remained. During the War of the Roses, Reinalt ab Grufydd ab Bleddyn, a Lancastrian captain who defended Harlech Castle for Henry VI against Yorkist forces, was constantly engaged in feuds with Chester. In 1465 a large number of armed men from Chester arrived at the Mold fair looking for trouble. A fight broke out which led to a pitched battle; eventually Reinalt triumphed and captured Robert Bryne, a former Mayor of Chester. The Welsh captain then took Bryne back to his tower house near Mold and hanged him. In retaliation up to 200 men-at-arms were sent from Chester to seize Reinalt. However the Welshman used his military experience to turn the tables on his attackers. He hid in the woods while many of the men entered his home; once they were inside, he rushed from concealment, blocked the door, and set fire to the building, trapping those inside. Reinalt then attacked the remainder, driving them back towards Chester.[3]

By the late 15th century the lordships around Mold had passed to the powerful Stanley family. In 1477 records mention that Thomas Stanley, 1st Earl of Derby had appointed numerous civic officials in Mold (including a mayor), was operating several mills, and had established a courthouse in the town.

In the 1530s, the Tudor antiquarian John Leland noted the weekly market had been abandoned.By now Mold had two main streets: Streate Byle (Beili) and Streate Dadlede (Dadleu-dy). About 40 houses made up the settlement. By the beginning of the 17th century, the coal industry had begun to develop in areas near the town. This led to a rise in Mold's population. By the 1630s there were more than 120 houses and huts in the area.

The government of Elizabeth I had established royal representatives (Justices of the Peace, Sheriffs, and Lords Lieutenant) in every county of Wales. Mold developed into the administrative centre for Flintshire. By the 1760s, the Quarter Sessions were based in the town; the county hall was established in 1833, and the county gaol in 1871.

In 1833, workmen digging a Bronze Age mound at Bryn yr Ellyllon (Fairies' or Goblins' Hill) discovered a unique golden cape, which dates from 19001600 BC. The cape weighs 560 g and was produced from a single gold ingot about the size of a golf ball. It was broken when found, and the fragments were shared out among the workmen, with the largest piece going to Mr Langford, tenant of the field in which the mound stood. The find was recorded by the vicar of Mold and came to the notice of the British Museum. In 1836 Langford sold his piece to the Museum and subsequently most of the pieces were recovered, though there is a tradition that the wives of some of the workmen sported new jewellery after the find. Restored, the cape now forms one of the great treasures of the British Museum in London.[4][5]

Mold hosted the National Eisteddfod in 1923, 1991 and 2007. There was an unofficial National Eisteddfod event in 1873.

Mold was linked to Chester by the Mold Railway, with a large British Rail station together with adjacent marshalling yards and engine sheds; however, these closed when Croes Newydd at Wrexham was opened. The station was closed in 1962 in the Beeching cuts, though the track survived until the mid-1980s to serve the Synthite chemical works. A Tesco supermarket was built on the station site in the 1990s.

In summer 1869 there was a riot in the town[6] which had considerable effect on the subsequent policing of public disturbances in Britain.

On 17 May 1869, John Young, the English manager of the nearby colliery in Leeswood, angered his workers by announcing a pay cut. He had previously strained relationships with them by banning the use of the Welsh language underground. Two days later, after a meeting at the pithead, miners attacked Young before frogmarching him to the police station. Seven men were arrested and ordered to stand trial on 2 June. All were found guilty; and the convicted ringleaders, Ismael Jones and John Jones, were sentenced to a month's hard labour.

A large crowd had assembled to hear the verdict, and the Chief Constable of Flintshire had arranged for police from all over the county and soldiers from The 4th King's Own Regiment (Lancaster), based temporarily at Chester, to be present. As the convicts were being transported to the railway station, the crowd of 1500 to 2000 grew restive and threw missiles at the officers, injuring many of them. On the command of their commanding officer, Captain Blake, the soldiers opened fire on the crowd, killing four,[6] including one innocent bystander, Margaret Younghusband, a 19-year-old domestic servant from Liverpool, who had been observing events from nearby high ground. The musket ball severed her femoral artery and she bled to death. The others killed included Robert Hannaby a collier from Moss, near Wrexham. He was shot in the head in the act of throwing a stone and died instantly. Edward Bellis, another collier, was shot in the abdomen. A local doctor, Dr Platt, performed surgery to remove the ball but Bellis died shortly afterwards. Elizabeth Jones, wife of Isaac Jones, living at Coed Talon, was shot in the back and died two days later from the injury.

The Coroner's inquest on the first three deaths was held in the same week as the riot, on Saturday 5 June. The Coroner, Mr Peter Parry, was described as "exceedingly old and infirm and being so deaf as to be compelled to use a 'speaking' trumpet, to which affliction must be added that greater one of partial blindness." He was assisted by the Deputy Coroner, his brother Robert Parry, surgeon, of Mold. The verdict of the Jury, following clear direction of the Coroner, and after retiring for five minutes to consider the matter, was that of justifiable homicide. Later that afternoon the Coroner held a further inquest on the death of Elizabeth Jones, who had died at 11 pm the previous night. The same verdict was reached. The following week Isaac Jones, a collier at Black Diamond, was one of a number of men tried for their involvement in the riot. He was allowed bail to attend the funeral of his wife. The other men tried were William Griffiths (medical herbalist, former collier, Mold), Rowland Jones (age 25, collier, Pontyblyddan), Gomer Jones (age 17, collier) and William Hughes (collier) At the conclusion of their trial they were found guilty of "felonious wounding" and Lord Chief Justice Bovill sentenced them all to ten years' penal servitude.[7][8][9][10][11][12][13][14][15][16]

Although he strenuously denied the connection, Daniel Owen, who lived in the town, featured some very similar events in his first novel, Rhys Lewis, which was published in instalments in 188284.

Mold railway station closed to passenger traffic in 1962, leaving the town difficult to reach by public transport.[17] The nearest station is at Buckley, which has connections to Wrexham and Liverpool. Flint railway station, to which Mold is connected by regular bus services, is not much further, and has direct trains to Cardiff, London and Manchester. Through the day there are frequent buses from Mold Bus Station to Chester and Wrexham as well as other nearby towns (including Denbigh, Holywell and Ruthin) and villages.

Sharing a building with Mold Library and Museum is Visit Flintshire, which is the main Tourist Information Office for the town and its surroundings, and provides an outlet for local artists and craftspeople to sell their work.

Mold is a cittaslow, it was the first town in Wales to achieve this distinction.[18] Mold has a diverse street market every Wednesday and Saturday for fresh produce and many other goods. For speciality and fresh local food, the Celyn Farmers' Market[19] is held on the first and third Saturdays of every month in Mold. There have been several producers in the Mold markets who also appeared regularly at Borough Market in London.

The Mold Food & Drink Festival is held each September. The food festival [20] has a main event area on the edge of the town centre, and many central and nearby businesses contribute to the event. The year 2012 saw Mold's first annual "November Fest",[21] a beer festival held in St. Marys Church Hall, King Street and venues in and around Mold, to promote real ale, cider and wine.

Mold has two secondary schools that serve the town and the surrounding villages. With about 1,800 pupils, the Alun School is the largest school in the county. It is adjoined by the only Welsh medium secondary school in Flintshire, Ysgol Maes Garmon. It is also home to the largest primary school in the county, Ysgol Bryn Coch, with about 650 pupils.

Companies based in Mold include NWN Media, publisher of The Leader.

Like the rest of the British Isles, Mold has a maritime climate with cool summers and mild winters. The nearest official Met Office weather station for which online records are available is at Loggerheads,[22] about 3 miles west of the town centre.

The highest temperature recorded in the area was 31.7C (89.1F) in August 1990.[23] However, the warmest day is typically around 26.4C (79.5F)[24] in an "average" year, one of around four days[25] to reach a temperature of 25.1C (77.2F) or above.

The lowest temperature recorded was 18.7C (1.7F) in December 1981.[26] On average the coldest night of the year is 9.7C (14.5F),[27] with a total of 62.1 frosty nights.[28]

Annual rainfall averages 925mm, with almost 152 days having at least 1mm of precipitation.[29]

Read the rest here:
Mold, Flintshire - Wikipedia

Do you have a SERIOUS mold problem, that may need Mold Remediation?

Then you're in the right place.

There is a dark side to the mold industry that you simply have to know...

or you may find yourself in thousands of dollars of debt...or even with a worse mold problem than you originally had!

In today's post I'm going to teach you everything you need to know, before deciding if your mold problem requires a Mold Remediation Expert.

I'll even show you a few tips if you feel brave enough to do it on your own.

Let's do this!

When referring to a mold removal company and a mold remediation company, both of these terms are used interchangeably.

If we are getting technical...

They are not the same thing.

Mold removal is just one part of the whole remediation process. Not all mold remediation projects will require mold removal as it may involve sanitizing the home only.

As you will learn, later on, the mold remediation process has many moving parts. You may also read terms such as mold extraction or mold abatement. These are other synonyms for mold remediation.

Don't worry if this is confusing. It will all make sense after this guide.

People can really freak out when they hear that four letter "M" word, but the truth is people tend to make more of it than there needs to be.

I am not insinuating that mold can't be dangerous because it absolutely can.

However...

There is usually some mold spores present in most indoor building environments, especially if you live in an area that is hot and humid.

Depending upon when mold remediation is necessary may vary from person to person. If somebody has an auto-immune disease or an allergy to a particular species of mold, the home will need to be as close to mold-free as possible. Simple issues that don't affect the normal person may harm them and sanitization may be necessary for the home.

When the mold is just on the surface, depending on the root cause, it can usually be cleaned by you rather than removed.

For example, below is a picture of surface mold on the top of a closet wall:

This mold as you can probably guess is on the surface.

The key thing that you need to know about surface mold is that this type of mold is not using the wall as a food source.

Mold is just kind of "chilling" on the wall. It can easily be cleaned.

Here is something that will also completely blow your mind that no other mold professional will tell you...

You MAY NOT have to clean it!

I know it sounds crazy, you have mold on the wall and you can just leave it there.

But here's the thing:

That mold is likely not airborne and will generally not hurt you.

I'm not saying that you should leave it there either...

Who wants mold on their closet wall?

Nobody of course!

The point I am trying make is that mold remediation is not always necessary. A simple wipe down can be sufficient if there is a surface mold.

Mold remediation is necessary when:

Mold is using building material as a food source or the air quality in the home is negatively affected!

If done correctly, mold remediation can ensure all mold is either removed or contained.

There is one thing that many homeowners obsess with during the mold remediation process:

Killing mold!

Sorry to burst your bubble here, but killing mold is not all that important. Besides the fact, the mold may already be dead!

Let me explain:

Mold can harm you whether it's living or dead.

As a matter of fact, in some cases, dead mold spores may make your sick more than living mold spores.

Here's why

Remember, you need three elements for mold to grow:

If you take any one of those three elements out, mold will stop growing

AKA become dormant mold.

For example, let's say you have a leak in your kitchen behind the dishwasher.

While the leak is active, the mold spores growing on the wall behind the dishwasher are wet and heavy. Because of this reason, the mold spores may not be airborne as much.

Once the area is dried out, the mold spores are no longer wet, and no longer heavy...

That means, yes, they can now become more airborne!

When breathing in mold spores, your body cannot distinguish the difference between living or dead mold spores.

The dead mold spores affect humans just as much.

Killing mold is not the answer! Proper mold remediation is.

Let me ask you, would you want to be breathing in this?

The mold industry is broken down into two separate sectors. You have the mold remediation companies and you have the mold assessors which can also be referred to as mold inspectors.

The mold inspectors are the ones that originally should be called out to the home to investigate any suspicions you may have about having mold in your home.

They are also qualified to take air and surface samples to confirm that you have a mold problem.

A mold inspector will write the protocol of the remediation work that needs to be done.

When having the original mold assessment, it should never be done by the company that performs the remediation.

In certain states, it's actually a law that a company can't do both on the same project. Having a company that does both at the same job site gives the remediation company a license to scam you out of money and completely exaggerate the extent of mold damage.

You can hire a mold assessor to not only perform the original inspection but to be a consultant to you through the remediation process and ensure the work has been done correctly after remediation. This may cost you some money but can save you THOUSANDS in the long run.

It's ok to take recommendations from your mold inspector for mold remediation companies, however, you should always ask for three. Make sure the inspector has no affiliation with any of the companies or tries to sway you in the direction of one particular company.

While it is recommended that you should hire a mold inspection professional to check your home for mold, it is not free.

If you have financial restrictions, your only choice may be checking the home for mold yourself.

There are two main things you should be looking for:

Problem is: You may not always be able to see mold or water damage.

Look around all doors, windows, under and around plumbing fixtures, on all ceilings, etc.

Do you see any staining?

Is paint starting to peel or bubble?

These are some of the questions that you should be asking yourself.

If you can't find anything, it's a step in the right direction but you are not out of the clear just yet.

To check for hidden moisture I recommend using a moisture meter and checking around the same areas. If you are detecting moisture it could mean a leak.

Now:

Just because you detected some moisture, does it mean you have mold?

Maybe, maybe not...

Does it mean you have a mold problem? Not necessarily.

Stopping the cause of the leak needs to be a priority, yes, but what you should be concerned with is if the leak is affecting the air quality within the home.

I know you are probably scratching your head right now thinking " how the heck can I do that?"

Don't worry, I got you covered.

An inexpensive option is getting yourself a My Mold Detective Kit. You can check out my full review of the kit by clicking here.

The air sampling pump does the same exact thing that a licensed professional's pump will do for a fraction of the cost.

Once you send in your samples you will receive an easy to read mold report which will tell you if mold is airborne throughout the sampled areas of the home.

Emergency water damage restoration can be a precursor for mold remediation. I would call it a sister industry to mold remediation. Some companies just do the emergency dry-outs and some mold abatement companies do both.

Nothing can be quite as stressful as having a flood in your home due to a water leak.

Having a big leak is usually a surprise...

Everything is soaked, wood is expanding, you're concerned about mold, it's just a messy situation.

But here's the thing:

If you catch the leak early enough, you can dramatically decrease your chances of having to need mold damage restoration.

Timing is everything.

For example, if you go away on vacation and come home to your home looking like this:

It's too late...

However, let's say you wake up in the morning and find water on the ground of your home due to a water leak that happened three hours earlier, how quickly you act will be crucial.

As stated above, there are companies that specialize in drying everything out to prevent mold. These companies services are referred to as:

Water Damage Restoration

Usually with the word "emergency" in the name because when you get a leak, well, it's usually an emergency! These terms are all used interchangeably. You may find these companies a few different ways...

Your first phone call should probably be your insurance company. These services are usually covered by your homeowner's insurance company but that is no sure thing.

See more here:
Mold Remediation Guide - lookmold.com

Should I test my home for mold?

In general, it is not necessary to test for mold. Both the CDC and the Environmental Protection Agency (EPA) do NOT recommend testing. No matter what type of mold is present, you should clean it up and make efforts to prevent further mold growth. Since the effect of mold on people can vary greatly, the presence of mold in the home does not imply a health risk.

The key to mold prevention is moisture control. Mold will not grow if moisture is not present.

Tips for mold prevention:

When cleaning up more mold than you might find in a corner of a bathtub or on a piece of old bread- Wear Personal Protection: Gloves, Mask and Goggles. Avoid touching mold or moldy items with bare hands you may want to wear gloves. Long gloves that extend to the middle of the forearm are recommended. Avoid breathing in mold and getting mold in your eyes you may want to wear a mask and goggles.

Within 48 hours, dry non-moldy wet materials to prevent mold growth. Clean moldy materials. Mold can be removed from hard surfaces by wiping or scrubbing with water and detergent. Dry the surfaces quickly. If you choose to use bleach to clean up mold, mix 1 cup of bleach with 1 gallon of water. Never mix bleach with ammonia. Open windows and doors and turn on the vent in the bathroom to increase ventilation.

If you think your children are sick because of exposure to mold at school or you are sick because of exposure to mold at work, first consult your health care provider to determine the appropriate medical action to take. Secondly, you should notify your building maintenance personnel so the mold can be cleaned up and the moisture issue can be addressed.

The U.S. EPA offers a program to schools called theIndoor Air Quality Tools for Schools (IAQ TfS)Kit. It shows schools how to carry out a plan of action to improve indoor air problems at little or no cost using straightforward activities and in-house staff. For information about Indoor Air Quality Tools for Schools, visit:http://www.epa.gov/iaq/schools.

Tennessee Department of HealthHealthy Homeshttps://www.tn.gov/health/cedep/environmental/healthy-homes/hh/mold.html

U.S. Environmental Protection Agency (EPA)A Brief Guide to Mold, Moisture, and Your Homehttps://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home#tab-1Mold Remediation in Schools and Commercial Buildingshttps://www.epa.gov/mold/mold-remediation-schools-and-commercial-buildings-guide

National Center for Environmental Health (NCEH)Moldhttp://www.cdc.gov/mold

Go here to read the rest:
Mold - Tennessee

What are the health risks of mold exposure? What are symptoms and signs of mold allergy?

Molds produce irritating substances that may act as allergy causing substances (allergens) in sensitive individuals. Furthermore, some molds produce toxic substances known as mycotoxins, but mold itself is not poisonous or toxic. The term "toxic mold," therefore, refers to the fact that certain kinds of mold can produce mycotoxins. The conditions under which some molds produce toxins is not understood, and the presence of mold, even a mold that is capable of producing toxins, does not always imply that toxins are being produced or that a health risk or problem is present. Mold may not cause any health problems, or it may lead to allergy or other symptoms in people, including adults and children, who are sensitive to molds.

Allergic reactions to mold are the most common health effects of mold and are therefore the greatest health risk related to mold. Allergic reactions may happen immediately or develop after a period following exposure. Both growing mold and mold spores may lead to allergic reactions. Symptoms and signs of mold allergy may include

Mold or mold spores may cause asthma attacks in people who have asthma and are allergic to mold. Even in some nonallergic individuals, mold can cause symptoms of irritation in the eyes, skin, and airways. For example, the "black mold" Stachybotrys, along with some other types of mold, produces toxins known as mycotoxins that can cause irritation of the skin and airways in susceptible individuals.

Sometimes, people may develop severe reactions to mold exposure. Symptoms of severe reactions, which are uncommon, include fever and difficulty breathing. People with compromised immune systems or patients with chronic lung disease can develop serious infections of the lungs due to molds.

It is not possible to predict the degree of severity of the health risks associated with mold in the home. Allergic individuals vary in their degree of susceptibility to mold, and any symptoms and health risks also depend upon the extent and exact type of mold that is present.

In 2004 guidelines update in 2009, the Institute of Medicine (IOM) reported there was sufficient evidence to link indoor exposure to mold with upper respiratory tract symptoms, cough, and wheezing in otherwise healthy people, although the report stated that was no evidence that mold causes medical conditions like asthma, bronchitis, or other respiratory conditions. Mold also worsens asthma symptoms in people who have asthma. Mold was also reported to be linked to hypersensitivity pneumonitis in individuals susceptible to this immunologic condition. This uncommon disease is similar to pneumonia and can develop in susceptible individuals after brief or prolonged exposure to mold, but there has been no conclusive evidence to prove this relationship.

More:
Mold Exposure Symptoms, Tests, Treatment, Removal & Dangers

Ahold of Mold Environmental serves customers in Buffalo, NY, Erie, PA and the surrounding areas for the last 24 years and counting. We provide diligent mold testing and or mold removal, and a range of water damage repair services. Our experienced mold removal technicians specialize in thoroughly remediating mold growth, saving you and your family from the potential of harmful toxins and allergens.

Read About Us In The News

We are not a fly-by-night company that has a quick certification from a non-governmental agency. Years of experience set us apart- We use the latest in FLIR Technology Forward Looking Infrared Imaging

Ahold of Mold Environmental has been practicing mold remediation and assessments for 24 years and counting. Ahold of Mold Environmental will continue to serve the area with the utmost respect for our clients giving them honest answers and continuing to uphold our reputation for years to come. With discreet, unmarked vehicles and expert mold inspection, remediation, and repair professionals, Ahold of Mold Environmental is your source for these services:

NY State Certified Mold Remediation Contractor

NY State Certified Mold Assessment Contractor

NY State Certified Asbestos Inspector

PA Doesnt Require or Request Such Certifications

Our regions of Western New York and Northern Pennsylvania are well known for radical temperature and humidity swings, older homes, and leaky basements, all of which increase the risk of harmful mold growth and water damage. Thats where the experienced black mold removal professionals at Ahold of Mold Environmental come in: we inspect your home, test your air quality, and fix any mold and water-related issues we find.

Learn More

No matter what the size or scope of your mold problems or water damage, Ahold of Mold Environmental is your source for experienced remediation services from expert contractors. We also carry proper insurance for Mold Remediation and Assessment Professional Liability and Environmental Pollution Liability insurance for your peace of mind. Our goal is to locate and thoroughly fix your damage while providing excellent communication, competitive pricing, total discretion, and friendly service.

Learn More

See more here:
Mold Removal in Buffalo, NY | Mold Remediation | Mold Testing

In the Wilmington, North Carolina area any home or business can quickly become infested with mold with our constant high levels of humidity and the introduction of a water source, like a roof or plumbing leak. Mold can spread throughout a property in as little as 48-72 hours, and can produce allergens and irritants that have the potential to cause other health effects.

If you suspect that your home or business has a mold problem, I&I Fire Water and Mold can professionally inspect and assess your home or business. If mold is found, they have the mold remediation training, equipment, and expertise to not only get rid of the mold but also prevent mold in the future.

A proper inspection and assessment of the area is crucial when dealing with mold damage. We are licensed investigators and experts at discovering where the source of the problem is and how to control it. As investigators, we have access to information not available to other Fire, Water and Mold Remediation Companies and the general public.

I&I Fire, Water and Mold has the state of the art moisture testing equipment that is necessary to properly test all surfaces of your home. Extremely accurate and puncture-free testing will let you know how much moisture is in your walls, floors & ceilings. This type of testing will let you know exactly how much your home is at risk for mold growth and will allow us to start preventing any mold growth in the future. This type of moisture testing is absolutely necessary before buying a new home. Contact Us to set up an appointment!

I&I Fire, Water and Mold have the specialized mold remediation training needed for maximum mold removal and prevention. We use HEPA (High-Efficiency Particulate Air) vacuums for mold removal after all affected materials have been thoroughly dried and contaminated materials have been removed. HEPA vacuums have specialized filters that capture tiny mold particles that would typically pass right through a normal vacuum filter. HEPA vacuums are also used for the cleanup of dust that may have settled on surfaces outside of the mold remediation area.

View post:
Mold Remediation - I&I Fire, Water and Mold