Installation Instructions for WoodHaven Log Siding

Watch our installation videos

Tools Required:

Compound Miter Saw Table Saw Wood Shims Large Flathead Screwdriver

To Start Your Project:

Set all of your Outside Vertical Corners (OVC). This can be done by screwing the corners directly through the OVC to connect to the house or if you prefer not to have any screws visible, use perforated steel strapping. Screw strapping to a 90 slot on the back of the OVC. Let the strapping stick out from the OVC six to twelve inches. Connect the other end to the house, making sure you hit studs in the corner of the house.

Now its time to set the D trim around all the windows and doors. If the D trim doesnt set level against the windows and wall, use shim stock to get it as close to a 90 angle, so that the log siding will butt tighter to the D trim. This is not always possible so you might have to miter the log siding to achieve a tighter fit.

Once you have completed all the D trim and OVC, you are ready to start your log siding. When starting your log siding, always start at the corner that is most visible to your driveway and road accesses. This way, if there is a discrepancy in your house from corner to corner you can still keep your lines straight from side to side. You will always want to work in a clockwise or counter-clockwise direction. Always end your project at a corner that is most non-visible to public or traffic. Take a four to six foot level and level the first piece of log siding to the sill plate, run screws through the top of the tongue at a 45 angle and the bottom screws the same through the groove to connect in the sill plate.

Now that the bottom row is level and secured to the wall, begin stacking and screwing the next piece on the wall, stair-stepping as you move up the wall. While screwing through the tongue, if it happens to splinter, do not be concerned. Just remove the splinter and continue. There is no reason to pre-drill holes for screws. The angle at which the screw is driven at allows the screw to go through the back of the log siding. Always look down the wall you are working on. Look for bulges and depressions in the wall. Where these occur, simply tighten or loosen the screws as needed, or shim. If there is a crown to the wood, simply use a large flathead screwdriver to pull the area down to the stack of the previous piece of log siding.

Remember, there is no wood product that is going to be at the tolerance of a manufactured aluminum or vinyl siding, but the appearance is no comparison to WoodHavens natural wood products.

These are some simple hints and pointers to make your WoodHaven project easier for you and to give it the appearance and integrity of a professional WoodHaven installation. If at any time in your project you run into any issues, please feel free to call your WoodHaven dealer so we can help you through your project.

Thank you for choosing WoodHaven products for your home improvement needs.

See the original post here:
Installation Tips | WoodHaven Log & Lumber

What is the appropriate fastener length to use for installing cedar shingle siding over insulation?

Assuming local Building Official approval for this type of installation is obtained, you should use the length of nail recommended for that specific material. Add the thickness of the existing insulation and this gives you the nail length required for the fastener to penetrate " or more into the sheathing. Refer to the CSSB's Exterior and Interior Wall Manual.

As long as the shingles are dry when stained it doesn't seem to matter whether they are painted on all 4 sides or just on the front side. A local, professional painting expert may be able to provide you with further guidance.

Yes, but most times you need to install additional window and door trim to ensure that the product lies flush with windows and doors. Sometimes this additional trim requirement makes it less expensive to tear off the old siding and start from scratch. Look at the diagram in the CSSB's Exterior and Interior Wall Manual for more details.

Put the bottom step flashing on the starter course, then bend the bottom of the step flashing out about 1" to 1 " away from the wall. The top of the step flashing is still under the siding or plaster. You do have to trim the top starter course shingle with a triangle shaped cut to allow this. This does leave a triangular shaped void between the bottom of the step flashing, the wall, and the shingle, that can be filled with caulk. This will divert the water away from the lower wall so the water does not run down the wall.

You can install grooved shingles this way, but it is a rather expensive installation. You have paid more for the grooves put on the face of the shingle, and they are manufactured with the intent of having the grooves facing out, to the weather.

Read more:
Siding | Installation | Cedar Shake and Shingle Bureau

When you install siding on your home, office or other building, it creates a fresh and new look. Among other contractor services, Thunderbolt Construction, Inc. performs siding installation services in St. Charles, IL; Chicago, IL; and the entire Chicagoland area. Contact us today at (877) 204-7600 to learn more about our services.

With the wide variety of modern and historic homes in the greater Chicago area, one can simply take a short driving tour to see good examples of the many different types of siding and exterior materials available. Whether you need vinyl siding installation or replacement, brick or masonry work, or need a siding repair near a roof peak, Thunderbolt Construction will be happy to meet with you to discuss your home improvement project.

Its easy to see why vinyl siding is such a popular building material in Chicago today when you consider its low cost and low maintenance qualities. In addition, it comes in a wide selection of colors to choose from, and is easy to replace.

Many owners of older Chicago homes are choosing to replace their aluminum siding with vinyl siding. Although once the standard in siding materials, the use of aluminum has greatly declined due to its propensity to bend and dent.

Wood siding is attractive, but requires more maintenance than vinyl siding. If you dread the work and cost of constant painting and upkeep, let us complete a siding installation that requires lower maintenance so you can enjoy a stress-free spring.

One of the most durable siding products on the market today is fiber cement. We use products from James Hardie, the world leader in fiber cement siding. Hardie siding is more weather resistant than many other siding options.

Great as an accent in one area on older or historic homes. Types include half round, straight or staggered shake designs, among others. Decorative shingle siding provides your home with a beautiful style youll love.

For the look of real stone without the cost, stone veneer can be used on the Chicago homes entire exterior, as an accent or even on posts and fireplaces. Installing stone veneer on the outside of your home will increase its curb appeal.

There is nothing like the rich, warm color of cedar siding, although it does require occasional refinishing. Call us today at (877) 204-7600 for more information on cedar siding installation, replacement or any other exterior home covering.

Brick and stone simply has a look of its own. For a solid, durable exterior with lots of curb appeal, brick is the product of choice. Contact us for any brick or masonry project, including chimneys, fireplaces and more.

More than siding installation, Thunderbolt Construction serves northern Illinois and southern Wisconsin with contractor services. We also offer door installation services, soffit installation services or replacement windows. Were also your number one source to find a professional gutter installation contractor or skylight installation contractor in the Chicago area. Contact us today at (877) 204-7600 to learn more about siding installation today.

Read more here:
Vinyl Siding Installation Chicago | Aluminum & Cedar Siding

Restoring or remodeling your home or business exterior is hassle-free when you choose Custom Siding and Windows as your contractor. Our company has been locally owned and operated since 1973 and we pride ourselves on being and honest and courteous in all dealings with our customers. We are fully licensed and insured and also have a favorable rating with the Better Business Bureau. We are happy to perform services and supply products for both residential and commercial customers. We offer name brand, high quality siding and window products that are both affordable and top-notch.

Call now at 816-509-0960 to choose your new windows or siding We give free estimates

Here are just some of the services and products that we provide as well as some reasons why we are considered leaders in our industry:

Call us now at 816-509-0960 to start on your siding or window installation Be sure to ask for your free estimate

Let us be your windows contractor. Contact us for siding installation and window replacement in Lawrence, Olathe, Lenexa, Overland Park, Shawnee, Kansas City, Blue Springs, Lees Summit, Raytown, and Independence areas.

View post:
Siding Installation and Window Replacement

We know that success of a business depends on the reputation. Hence, our endeavor is to earn goodwill and trust of the most important entity in the world that is our customers. When you expect total satisfaction, we walk an extra mile to delight you with top quality material and unmatched workmanship. Each job turns out to be a quality job, from start to finish. With a team of young and energetic folks, we are there to carry out installation and maintenance of all varieties of siding. Nothing speaks louder than quality. We make sure that each assignment carried out by us becomes our brand ambassador.

It is a fact that you need home repair and maintenance in spite of all precautions and care. Though we offer the best quality siding solution to you, at times you need repair and maintenance. Due to natural calamities or simply aging process the sidings get damaged. Do not worry about the damage caused by the storm or heavy rains; Tacoma Siding is there with top-quality service at prices that are suitable for your pocket. We know that you are already worried about the financial loss. Hence, we dont want to overburden you.

We are versatile and multifaceted. Whether it is vinyl, fiber cement, insulated or wood sidings, we have experts who can handle all varieties of it without hassles. We send experts to inspect every corner of your home and make a meticulous plan to regain and restore the lost charm. When our team carries out siding repair, your building will be protected for years.

Competitive prices and compatible services are two prime differentiating factors of Siding Contractor Tacoma. We want to have a lifelong relationship with the clients and not just one-off transaction. Read testimonials and reviews of us which establish the validity of the fact!

We can asses whether you need repair or new installation? When you call us for consultancy, it is our responsibility to give the best suggestion to you. We verify the site and assess the damage. If you need a total revamping of the siding, then we tell you the approximate cost and time needed for the same. We fix them in the least possible money in the town. We make sure that you are served with paramount quality and utmost perfection. With a team of dedicated and learned people, you get service that is better than the best. We believe that your satisfaction is our success.

Read the original:
Siding Contractor Tacoma - Siding Installation and Repair

Intro

Vinyl siding cuts easily, goes up quickly, produces uniform reveals almost automatically, and needs minimal caulking and no painting. But don't take the job lightly: The walls must be well-prepared and the pieces installed correctly to prevent leaks and siding failure.

With vinyl siding, some moisture will seep behind the siding and must be allowed to escape at the bottom around weep holes, much like those in a brick wall. Seepage won't be a problem if you correctly install building wrap and flashings or if the underlying siding is in sound condition.

The higher the vinyl gauge -- that is, the thicker it is -- the better it will perform: 0.048-inch-thick vinyl is significantly stronger than 0.040-inch-thick vinyl. Vinyl siding does not need to be painted.

The basic rule is "hang loose." Because vinyl expands and contracts with changes in the weather, nails should not be driven fully tight, and pieces should be cut so there are 1/4-inch gaps between panels and trims.

Prestart Checklist

Time With a helper, 600 square feet per day

Tools Hammer, miter saw or circular saw, tape measure, clamps, chalk line, drill, pry bar, square, level, story pole, caulking gun, utility knife, T-bevel, tin snips, staple gun, snap-lock punch tool

Skills Measuring, laying out a job, cutting

Prep Apply building wrap, trim, and flashings.

Materials Siding, trim to match (inside and outside corner posts, J-channel, starter strip, window and door starters), flashing, stainless-steel or galvanized nails, caulk

Visit link:
Installing Vinyl Siding - How to Install Siding. DIY Advice

As part of EDCOs commitment to excellence, we offer comprehensive, hands-on training for industry professionals at our on-site Jock U training center in Hopkins, MN. Learn from our roofing and siding experts how to install siding, aluminum fascia, steel roofs and more with time-saving precision.

Certification is becoming increasingly important to quality gate-keepers such as the Metal Roofing Alliance. All attendees of Jock U receive a certificate of attendance. Most importantly, training and proper installation ensures excellence for your customers and prolongs the life of your roofs, siding, soffit, fascia and otherEDCO Products. All classes are provided free of charge.

EDCO Products, Inc. offersArrowLine roofingtraining programs for dealers, installers and architects throughout the year. This one-day training seminar includes sales and marketing ideas along with extensive training on installing ArrowLine roofing products.

Get in touchto register for an upcoming seminar.

Wondering about the pluses of steel roofing or the benefits of EDCOs soffit and fascia products? Stop by ourFAQspage.

Jock U was named in memory of Art Edwards son, Jock Edwards. Jock first established the training center as an additional service for our professional partners. He was known for his commitment to excellence, quick wit and easy smile, and he is missed by all of us in the EDCO family.

Excerpt from:
Experts Soffit Installation | Installing Vinyl Siding | EDCO ...

Siding

Because Siding Vancouver WA is such a durable and long lasting choice for the exterior of your home or office, it is important that you contact the company that gets it done right. At Dr. Siding, we understand that it is important for your property to look nice as well as for you to save money on your utility bills, which is why we offer only the best siding services for every customer.

In deciding what you want to have installed on your home or commercial building, you will probably realize that you have a variety of options. We believe that siding Vancouver WA is a fantastic choice for the following reasons.

We realize that each of our customers have different needs than the next when it comes to their siding, which is why we offer a variety of high quality products. In some cases, we have even installed multiple siding options on one structure to make it completely unique and textured. Some of our siding Vancouver WA options include

Here at Dr. Siding we specialize in giving you the best and that is why we typically use the number one brand in the industry. James Hardie Siding is the premier siding for most situations because of its superior build quality and amazing 30 year warranty. Please read a little more about James Hardie siding below and please dont hesitate to give us a call with any of your questions.

James Hardie makes a variety of different options for your homes siding, please learn a little more by clicking on the options below:

James Hardies new architectural grade line features artisan lap and artisan accent trim products. Backed by 15 years of research and development, artisan lap delivers.

Read more about artisan lines click here

ColorPlus Technology is a proprietary process involves applying consistent, multiple coats of paint that was created especially for the demands climate places on a homes exterior. The end result is a beautiful consistent finish that lasts up to 2xs longer than other methods. A baked-on coating offers maximum durability and resistance to prolonged exposure to freezing climate and moisture contact.

Cement board also has great fire resistance compared to vinyl or wood alternative, please view the videos below on how big of a difference it can really make.

See how we stand out from the competition:

We also provide:

Please check out some of our manufacturers websites for more information regarding the products we install.

Continue reading here:
Siding Vancouver WA | Dr. Siding

When you are in need of professional siding installation, our craftsmen at Ver Wys are here to assist.Whether a new home or replacing your existing siding, our siding installation experts will professionally install your homes vinyl, aluminum, or wood siding.

At Ver Wys Home Improvement, our workers are highly trained and perform only the highest level of craftsmanship. No matter the material or extent of the project, our siding installation specialists will deliver a quality, professional installation job anywhere in the Greater Grand Rapids and West Michigan areas.

Our goal is to make your home the best looking on the block. From J-less trim around doors and windows to color selection recommendations, be assured that your siding installation project will be in the hands of professionals.

Time to replace your existing siding? Please contact us today at (888) 595-5753 for a free estimate or schedule a consultation to discuss your siding project with our experts.

More here:
Grand Rapids Siding | Siding Installation and Repair | Michigan

Stealth Cabin by superkl; photo by Shai Gil Fotography

Spacing for the siding should be laid out beforehand. The number of board spaces between the soffit and bottom of the lowest piece of siding at the foundation should be such that the overlap is as per the table.

Start with the bottom course using a furring strip to support the lower edge. Each succeeding course overlaps the upper edge of the previous one by a minimum of 1 inch. Rabbeted patterns are self-spacing, but leave 1/8 inch expansion clearance. Where possible, the bottom of the board that is placed across the top of the windows should coincide with the window cap.

Bevel siding should be face nailed to studs with 1-1/4 inch penetration into solid wood using one nail per piece spaced at a maximum of 24 inches on center. Place nail just above the overlap. Take care not to nail through the overlap of two pieces.

Do not reduce the siding overlap recommendations given in the installation sections of this publication. Doing so could result in damage from wind-driven water. Use the larger overlaps for unseasoned sidings to allow for shrinkage and expansion. Take care not to overdrive fasteners when using larger overlaps. Butt joints between boards should be staggered and meet on studs. Fit siding snugly to other pieces and to trim.

*These overlap recommendations must be followed for proper installation.

See more here:
Installing Bevel Cedar Siding - Real Cedar