Tips to consider to make LED lights more effective, where to put LED bay lights? – eTurboNews | Trends | Travel News

When large interior spaces need to be lit, high bay lighting is usually appropriate. Consider spaces such as manufacturing facilities, gyms, warehouses, department stores, factories, and more; these facilities are usually spacious and include many vertical and horizontal spaces. This requires strong lighting to provide the appropriate level of foot wax to illuminate adequately. LED bay lights https://www.lepro.com/led-bay-light fixtures usually hang from the ceiling through hooks, chains, or pendants, or can be mounted directly to the ceiling (similar to a troffer lamp).

Outside thearea, the height of the ceiling and its shelves location affect the arrangementof lighting. For example, we need to use a denser range of high bay linearprojection lamps to illuminate a narrow hallway. So for the high ceiling, itwould be better to use a smaller beam angle to preserve the floors brightness.If you have a low ceiling and a spacious area, we can use a wider beam angleand less dense matrix for better uniformity.

The dazzlinglight causes discomfort for the storekeeper. There are many dangerous machinesand tools inside the warehouse, such as forklifts. The intense glare irritatestheir eyes and affects them when they see people or property near them.According to the latest report, around 15% of accidents are related to poorlighting. And therefore, having a good warehouse lighting system is vital. LEDproducts are equipped with exclusive lenses with a built-in glare controlfunction. This design can reduce glare by 60% compared to conventional lightingfixtures such as metal halide and halogen spotlights.

The primaryfunction of dimming is to maintain consistency in shine throughout the day.During the day, since a lot of sunlight is coming through the windows, we candim the warehouse lighting. At night, we can increase the brightness to provideadequate brightness for workers. This flexible handling helps maintain the bestworking environment.

The dimmeris also very useful for saving energy. As there are many functions in thewarehouse, and each of them has the best light requirement. For example, weneed more lumens for repair and less for general storage. It would beconvenient to use if the warehouse lighting can be dimmed for each use, withoutreinstalling the light.

The aislelighting in our warehouse supports both PWM and DMX dimming systems. You canalso select the photo sensor and motion sensor to detect light and people,respectively. If there is no need to turn on the light or use full brightness,the dimmer will automatically dim the brightness.

Have youever found that the light is not as bright even at 1000W? As they have very lowenergy efficiency, the brightness is very low even if you use the highpower fixture. However, LEDs have 8-10 times the luminous efficiency ofthese conventional lamps. And so, 100W LED replaces halogen or metal halidelamps of 1000W; we have different wattages for LED lighting products, from 60Wto 10000W, so that you can always find the most suitable lighting solutions.

Theinstallation cost is generally comparable to the cost of the lamp. So,selecting the high quality that works the longest will save you on maintenancecosts in the long run. LED lights have a lifespan of 80,000 hours, which isequivalent to 30 years of use based on 6 to 7 hours of use per day. If you usemetal halides, you may have found that you need to replace them almost everyfew months or every year. This is because the brightness decreases very quicklyfor non-LED lights.

Read the rest here:
Tips to consider to make LED lights more effective, where to put LED bay lights? - eTurboNews | Trends | Travel News