Thinking of installing hardwood floors? Heres what to consider. – The Philadelphia Inquirer

Theres a lot to like about hardwood flooring. It brings a bit of natures beauty into your home, and it goes with just about any decor. It requires an investment of both time and money, but when the dust settles, wood floors are almost always worth it. Whether you are thinking of installing hardwood in a single room or your entire home, here are some factors to consider.

Your lifestyle. The biggest factor in deciding whether hardwood will work for you is your lifestyle. Do you have children or pets? Are there high-traffic areas, such as a den, where you are always moving furniture around for gatherings or movie nights? Are you willing to put up with dings, dents and imperfections from a dropped soup can or your Aussiedoodles nails?

Or are you OK with a floor that reflects you and your familys life and history? If so, then hardwood is worth it, says Jennifer Meska, director of merchandising for national retailer LL Flooring.

Solid wood vs. engineered. Solid wood is just that: a solid piece of wood, typically -inch thick, that can be sanded and refinished multiple times. Engineered wood is a layer ranging from paper-thin to -inch of high-quality wood over a plywood core. Depending on the top layers thickness, engineered flooring can be refinished once or twice max. Engineered flooring is both durable and flexible. Manufacturers can also build in features such as water resistance, which can make this flooring choice an option in damp areas, including kitchens and bathrooms.

Appearance. Some woods have finer grains or a uniform texture, while others may contain knots or vary in color. Before you commit to anything, bring home large sample planks (dont rely on a 3-by-3-inch block or a single plank) of each wood you like, and move them from room to room to get a sense of how they will look. The color in the store may be different from what you see at home.

READ MORE: What's the best home improvement you can get for under $20,000? New flooring.

Stability. It may sound obvious, but hardness matters. The wood flooring industry uses the Janka scale to measure the hardness of a particular type of wood. The test measures the force needed to push a 0.444-inch steel ball halfway into the wood. At 1,290, red oak is the median. Black cherry, teak and Douglas fir rank softer; hickory and pecan are harder. Brazilian cherry is one of the hardest. Theres no good or bad Janka rating; rather, its an indication of how much wear and tear solid wood flooring will be able to handle over the years.

Site-finished or prefinished. Solid hardwood is available both without stain and sealer, or prefinished, which are stained and sealed at the factory. For unfinished wood, stain and finish are applied at your home after installation. You get to test multiple shades of stains, and the result is a consistent color across the entire area. One tip from Meska: Ask your installer to keep a record of your color/formula or to leave you a small can in case you have to replace a damaged area.

For either product, youll also need to consider the finish. This ranges from matte to high gloss. Some woods even come with an oil or wax finish for a soft, hand-rubbed look. Finish is really a matter of personal taste, but Jeff Shipwash, owner of Shipwash Properties, a fix-and-flip real estate investment firm in Knoxville, Tenn., says you are more likely to see imperfections with a higher gloss.

READ MORE: These are the top home renovations Philadelphians plan to tackle in 2022

Local climate. Hardwood can work in any climate, but you do have to take your location into consideration. Wood swells in high humidity and shrinks as humidity falls. Your installer can explain how to mitigate any potential issues. In areas with sticky, hot summers, you may need air-conditioning. Miller says engineered flooring is more stable and adapts to changes in temperature and humidity better than solid wood.

Hassle factor. Installing a wood floor is invasive and disruptive. Even before installation begins, wood planks may have to acclimate to your environment. That means stacks of boxes will sit in your home for up to two weeks, so the wood can adjust to the temperature and humidity. Existing flooring must be ripped out. Furniture must be removed. Unfinished wood must be cut to fit and sanded, producing enormous amounts of sand dust, akin to a glitter bomb going off, Shipwash says.

Then you have to stain the wood, wait for it to dry, and then sand and seal the wood three times, allowing for the finish to dry between coats, he adds. You cant walk on the floors, and some folks are sensitive to sealer fumes, so you may have to move out of your home for a week or more.

Even though it also has to acclimate, prefinished wood does cut the installation time by half or more. Once its down, its ready to go.

Cost. Engineered wood tends to be a bit cheaper than solid. For example, three-inch-wide traditional red oak costs about 20% more than engineered, Meska says, but the installation costs are the same. People think it is cheaper to get unfinished wood, but you will pay more to finish it, Shipwash says.

Your installer. Because this is a major investment, its best not to cheap out and hire someone off Craigslist, Shipwash says. The NWFAs consumer website is woodfloors.org. There, you can find NWFA-certified installers and salespeople in your area by clicking on Hire an NWFA Professional and entering your zip code. Another option is to locate a local or national specialty retailer. Odds are that business can recommend installers.

Miller says some flooring manufacturers offer their own certifications, so it may be worth the time to look at their websites to see whether they have certified installers in your area. As with any home improvement, you should interview installers and get multiple bids. For additional guidance, download the NWFAs Homeowners Handbook to Real Wood Floors.

Visit link:
Thinking of installing hardwood floors? Heres what to consider. - The Philadelphia Inquirer