Heres how to repair and patch damaged drywall – KTAR.com

(Shutterstock Photo)

No matter the age of your home, drywall damage will occur. Whether it be from doorknobs, roughhousing, minor water damage, moving furniture or mounting hardware from artwork, mirrors, TV mounts, window treatments, etc., it will happen. Minor damage is a relatively easy fix. Small screw or nail holes can even be patched with white toothpaste and touch painted to blend in.

Repairs to areas of major water damage are best left to the pros. You never know what kind of damage is lurking behind that drywall. There could be mold and that is something that is best left to a professional mold remediation expert.

The age and condition of the paint on your wall and stored paint from when it was applied are really the key factors in how quickly you will finish drywall repair projects. But its the quality of the patch work that is critical to restoring drywall to look like new. The paint will only look as good as the surface its applied to. A poor patch with a poor texture match will stand out more than youd expect, even with the best paint coating.

Nail holes in a wall where a picture used to hang can be filled with spackling paste, caulk or even toothpaste for an especially tiny hole; let it dry and sand it down before repainting.

For dents or holes larger than a quarter, drywall texture and drywall tape or mesh will be required to complete the project. Anything over a 2-inch square will require a scrap drywall piece to cut a filler piece along with the following tools:

Optional:

Water-damaged drywall can be identified in a few different ways. Oftentimes on ceilings and walls you will notice that there are ripples or blisters in the paint. If you feel the blisters and they arent solid or if the paint starts flaking off as soon as you touch it, you likely have a water issue.

(Shutterstock Photo)

You may even find water in the paint blisters which makes your investigation easy! Other common signs are areas where the drywall is soft to the touch and water stains/discoloration appear. Before you start a water-damaged drywall repair, be sure to identify and fix the source of the water intrusion.

If water is getting into your wall from rain, a sprinkler thats too close to your house or even from a plumbing leak, youre likely to see patches of damage on your walls near the spot of the intrusion. Thats because drywall has a paper backing, so when it gets wet, it can bubble and wrinkle, sort of like a sheet of paper does.

To diagnose the problem, place a 4-foot level across the damaged area and learn how much the sheetrock has sagged. If its more than about 3/8 of an inch, the structural integrity of the drywall is probably ruined and the section should be replaced.

If no sagging has occurred, use an awl to randomly push into the sheetrock. You should feel substantial resistance, and the awl shouldnt be able to penetrate the sheetrock any more than 1/8 of an inch without excessive force. However, if the awl goes through the sheetrock much deeper than 3/16 of an inch, consider replacing the section.

To replace the section: Use a utility knife to cut out the damaged area, leaving a square or rectangle so its easy to match up with a new patch of drywall. Look in the hole to see if the damage goes deeper than the drywall (to the studs, for example) and find the source of the leak so you can stop it before you fix the wall. Set up a fan near the hole you created and thoroughly dry the area before continuing. Cut a new piece of drywall to fit tightly into the hole you have created. You may have to back it with a piece of plywood. Then attach the drywall and use a good-quality drywall tape to cover the seams.

Prime, paint and keep a close eye on it in case the damage returns. That could signal a more serious water problem than you suspected.

To repair the damage: If the damage is superficial, you may not have to replace the drywall. Dry the area thoroughly, sand the blisters from the wall and prime the spot with a pigmented lacquer product called KILZ. This product will keep the stain from bleeding through a new coat of paint.

Go here to read the rest:
Heres how to repair and patch damaged drywall - KTAR.com