Home Builder Developer - Interior Renovation and Design

For more than 11 years LaddersFree has been recognised as one of the leading window cleaning companies servicing shops, office hotels and other premises in your area

Uniting a team of specialist window cleaners that use water fed pole technology alongside our traditional window cleaners that deliver service levels that are unrivalled in the industry, has enabled LaddersFree to build a client base that includes Topshop, Holiday Inn Hotels, HMV and Mercedes Car Dealearships.

All window cleaning is carried out by experienced, friendly operatives that live locally and comply with all aspects of Health and Safety legislation.

In the last four years, we have retained 97% of our customers, so hopefully that speaks for itself. Regardless of whether you have a small or large premises or how often you want a service, we will clean the windows and clean them well. LaddersFree are a professional window cleaning company dedicated to achieving 100% customer service.

View original post here:
LaddersFree - Window Cleaners - Window Cleaning across the UK ...

How to install gas water heater Start by selecting new water heater: Also read: Which is best gas water heater for homeowner/ things to consider 1) Check label on side of old tank Gallons and BTUs of old water heater. NG natural gas or LP propane gas > these are two different water heaters Measure height if necessary. Natural gas NG or Propane LP Propane water heater not recommended below grade (in basement) Propane gas is heavier than air, so gas leak hugs floor and can fill basement with explosive gas. Natural gas is lighter than air, and will rise. Odorant is added to gas. If you smell gas, leave house immediately and call gas company. How to replace TP valve 2) Check if TP needs to be specific height

Important if overflow tube goes through a wall or cannot be moved. TP overflow tube must drain downward, and cannot tip upward.

If arrestor screen becomes clogged with dust, the amount of air entering combustion chamber is reduced, and this slows draft going up vent pipe, which causes slow draft, vent odors, sooting, possible danger from incomplete gas combustion, and eventually causes combustion chamber to overheat, which trips FV lockout system. Repairs required. Keeping arrestor screen is important, so choose water heater with screen located on bottom of tank where it is easier to inspect and clean.

Install electric insted? Note: any ordinary electric water heater can be installed in mobile home when circuit breaker box can support rated wattage. 4500 watt electric water heater = 10 gauge wire and 240volt 30 amp breaker Replace elements with smaller wattage 3800 watt electric water heater = 12 gauge wire and 240volt 20 amp breaker

Should you select 6 year 9 year 12 year? Only difference is anode rod diameter, or sometimes 2 anode rods. You can convert 6 year tank into 12 year or 15 year by inspecting anode each 1-3 years, and maintaining tank as shown in product manual. How to Replace-anode-rod.htmlExtended warrantySome stores offer extended warranty. Do not buy extended warranty unless it also includes labor.

Always turn off water heater when painting or working with fuels Make sure water heater has adequate air supply. Avoid dusty atmospheres and exposure to clorox and pool chemicals. Clean air intake yearly and clean combustion parts frequently to avoid ECO shutdown caused by overheating.

Most residential water heaters are .58 to .62 EF means there is not much difference in yearly cost Read more Chart "Energy Factor indicates combined thermal efficiency and standby efficiency of a water heater." Energy star gas water heaters 2012 You can reduce greenhouse gas with higher energy factor > BUT< if water heater has elaborate design, then repair costs outstrip savings. All costs are energy. Estimated annual cost of running gas water heater/ pdf

Check that water heater is NG natural gas or LP propane gas > these are two different water heaters Do not install LP gas water heater below grade (basement) since gas leak will fill basement with explosive gas. NG is fine for basement since NG natural gas leak is lighter than air and will rise, so basement will not fill with gas Gas water heater should be set 18" above floor level. Adequate incoming air supply is needed. Do not install LP gas water heater below grade (in basement). Read water heater safety precautions before starting Water heater precautions/ pdf

1) Turn off waterNotice that shut off valve is located on COLD water pipe. Hot pipe must go to side of heater marked HOT, and cold to COLD or heater will not work. Disconnect water pipes from water heater. If you are unsure which pipe is hot, then run hot tap for a minute and feel which pipe on top of water heater is hot

Located water meter box, remove lid, dig away dirt to find shut off Shut off is located on house side of meter Use water key or pipe wrench

Follow this link:
How to install gas water heater

Hot Water Heater Installation and Repair Services Do you need to repair or replace your hot water heater?

Hot water heaters often last many years, but tend to lose efficiency with each passing year. How do you know if you need a new water heater? Check for the following signs:

This last issue is worthy of attention. Feel free to watch this brief video or continue reading the information below:

According to the U.S. Department of Energy, heating water is typically the third-highest energy expense in your home (clothes dryers and refrigerators use more). In recent years many improvements have made water heaters more efficient, and thus less expensive to operate. In addition there are innovative options like tankless water heaters and continuously-recirculating water systems that can further reduce your energy costs and water bills.

As a general rule, if you have an electric hot water heater, you can replace it with a gas heater and save 50% on energy costs, so for many people, thats a no-brainer. If you already have a gas heater, and its got some years on it, it may be operating at greatly reduced efficiency, thanks in part to the red clay (mud) that tends to flow into homes and businesses via local utility systems.

Tests have shown that a gas hot water heater more than 10 years old is probably operating at about 50 percent lower efficiency, so again a new model will bring significant savings. The experts with ER Plumbing can help you determine if it would be better to repair or replace your hot water heater, and what model would be right for your needs and budget.

If you need hot water heater repair, your solution may be as simple as sealing a water heater leak or replacing a burned out heating element. ER Plumbing will do it right the first time because:

If youre considering a new hot water heater, now is the time to look into tankless water heaters, the newest and most energy and space efficient of the water heaters on the market today. See our page on tankless water heaters for details.

Through many years of experience, ER Plumbing has come to believe that the following brands offer the best value for your dollar, and are the ones we recommend and install the most:

Todays efficient hot water heaters can be installed in your basement, crawl space, attic, closet or even outside your home (in the case of tankless water heaters). In the old days, gas water heaters were vented up the chimney, but now water heaters are so efficient that their exhaust often lacks enough waste heat to propel the exhaust up and out of a chimney. That means a direct vent through a basement wall or attic roof can be more efficient.

See original here:
Hot Water Heater Installation and Repair Services | Charlotte ...

home section Interior Design Housekeeping Entertaining Home Improvement Gardening & Plants Landscaping eHow Home & Garden Garden & Lawn Lawn Ornaments How to Install a Hand Water Pump Fountain

Cathy Conrad

Cathy Conrad has more than five years of newsprint experience as an assistant editor and is a professional writer. She has worked as a virtual assistant and email support specialist, and has more than 20 years of experience working in the medical field. Conrad is currently licensed as a Texas insurance representative and has many years in home improvement and gardening.

A throwback to the olden days are the old hand-pump style water spout. You used to have to pump the handle to build up pressure for the water to pump from the water well to the spout to fill buckets for water for the home. Although modern conveniences are better, the rustic look of the old water pumps are a beautiful addition to any garden. Take a trip to a junkyard or flea markets to find different sizes of the old hand pumps to convert them into water fountains.

Choose a location for your water fountain. Keep in mind that it will need to be close to an electrical outlet. Also, decide on how big the fountain will be to determine how big a water pump, barrels and concrete pad will be. Leave enough room between the pad and any structure to hold the pedestal for the fountain, which will be built with five 4-by-4-inch boards. The pedestal will be 12 inches square.

Place the concrete slab in the area the fountain will be. Make sure it is level.

Place one barrel close to the back edge of the concrete slab. Position the second barrel over the back side of the top rim of the first barrel. It will hang over in the back approximately 8 inches.

Drill a 1-inch hole near the top rim and in the back of the first barrel for the tubing. Cut a 1-inch V in the front of the top rim of the second barrel. This is where the water will spill into the bottom barrel.

Dig five holes, each 4 inches deep, with the post hole digger, between the pad and the home. Make a square with four posts in the corners and one in the middle. Drop the 4-by-4-inch posts into each hole and fill with Quikrete, according to manufacturer directions. Make sure the posts are as tall as the second barrel and check that they are level. Allow the Quikrete to dry, according to manufacturer directions.

Cut a 12-inch square of 3/4-inch plywood and place on top of the posts. Nail in place by nailing through the plywood two to three times into each post.

Link:
How to Install a Hand Water Pump Fountain | eHow

How to Cover the Front Edge of Stair Treads

Of the many design considerations you face when refurbishing a staircase, the leading edge of the stair treads can become the most troublesome. Most carpeted stairwells tend to be squared off and blocky-looking along the front edge once the carpet is pulled, and even if made of hardwood and rounded, this detail receives the brunt of the daily wear and tear and usually shows its damage readily over time. Several techniques can soften this edge and provide an elegant and functional bullnose radius to the treads. The result will add a finished touch of beauty to your staircase and even

Recommended Rise for Interior Stairs

Less than 100 years ago you could build a home with little oversight. This resulted in features like stairs too steep to feel comfortable climbing, as builders attempted to save floor space and materials. A steep, narrow stairway is just one example of the lack of minimum safety standards that contributed to poor living conditions, accidental injuries and deaths. In 1927 the first standardized regional building code was introduced in the United States. Today, there is still no single national building code. Codes vary slightly by region with states and localities adapting regulations to their needs. All codes, however, address

How to Convert Closed Stringer Stairs to Open Stringer Stairs

Whether a stair stringer is open or closed influences the look it imparts. A closed stringer is created with either cleats holding the step tread in place or possibly recessed cuts that encompass the tread. The result is a step where you cannot see where the tread begins or ends. In contrast, an open stringer is cut to outline the tread in a distinct zigzag pattern and the tread ends are exposed. Builders typically install closed stringers against a wall and open along a free expanse. However, they are interchangeable, and converting your closed stringer to open will create an

How to Build a Small Handicap Ramp in the Garage

A handicap-accessible ramp can make all the difference to independence, allowing not only those in wheelchairs, but also the elderly who cannot use steps confidently to get outside, go shopping or make it to the doctor's office. The best wheelchair ramp design climbs only one inch for every foot of ramp length, or less. This translates into a 12-foot-long ramp for a rise of 1 foot -- not quite two steps, typically. Often a garage just doesn't offer the room, however, and a U-shaped ramp still proves too bulky. A shorter ramp is smaller but steeper, and may require assistance

Installing Concrete Treads With Rails

Concrete stair treads are a sturdy tread material with an abrasive surface to improve traction on stairs. Concrete treads are precast to fit within the stringers of a metal staircase. Bolt-on stair treads are a simple tread solution for the do-it-yourself homeowner because they require no mortar for installation. Instead, bolts secure the treads to angle tabs on the runners, which are welded in place at each tread location. A metal handrail attaches to the concrete treads with a base plate and anchor bolts, assuring safe stairway use.

Link:
Walkways | Building & Remodeling | eHow - eHow | How to Videos ...

The Home Depot has everything you need for any moulding or millwork project you take on. Crown moulding adds a finishing touch to any room. Ceiling medallions make a design statement. Wood paneling is a popular choice for basement family rooms, and corbels have a classical look all their own. Whatever project you are working on adding a chair rail, hanging a mantel, or installing paneling or wainscoting you will find everything you need at The Home Depot.

Beyond our expansive moulding and millwork inventory, turn to The Home Depot for advice on chair rail ideas, Moulding Buying Guides that help you choose moulding to match your interior design, as well as step-by-step instructions for jobs like painting paneling or cutting and installing crown moulding. When youre in the store, the knowledgeable associates at The Home Depot can help you decide which moulding and millwork is the best for your individual needs. The Home Depot is the best resource for do-it-yourselfers and professionals.

Read more here:
Moulding & Millwork - Corbels, Crown Moulding, Wood Paneling ...

Professional Tree Removal
This Green Ash is infected with EAB (Emerald Ash Borer) It is a full removal the peg is left till another truck picks it up Filmed with a Go pro Hero HD Black Rate, Comment, Subscribe!!...

By: Zack Whitehead

Read the original post:
Professional Tree Removal - Video

Tree Removal St George Utah
Removal of a large tree by a certified arborist in St. George Utah. Master Arbor out of St. George Utah.

By: Kevan Jorgensen

More:
Tree Removal St George Utah - Video

Tree Removal Barnet
http://www.youtube.com/watch?v=SMoMISf-YOA Looking for tree removal services in North London? We are a family business established 20 years. Fully insured. All kinds of trees expertly felled....

By: nash james

Visit link:
Tree Removal Barnet - Video

Cut Huge Tree by Professionals. Tree Services, Tree Removal Services. Cutting Trees.
Cut Huge Trees by Professionals. Tree Services. Tree Removal. Cutting Trees. tree trimming service. Tree Cutting. Tree Services. How to remove trees. stump r...

By: RockTheOnlyOne

Link:
Cut Huge Tree by Professionals. Tree Services, Tree Removal Services. Cutting Trees. - Video