Home Builder Developer - Interior Renovation and Design

home section Interior Design Housekeeping Entertaining Home Improvement Gardening & Plants Landscaping eHow Home & Garden Building & Remodeling Home Additions How to Design Garage Additions

Shelley Frost

Shelley Frost started writing professionally in 2007. She specializes in parenting and education topics. Frost gained her experience in various positions in the education field, including classroom teaching and tutoring. She holds a BA in elementary education with a reading endorsement.

Garage additions turn a boring, cramped garage into a spacious storage area with increased functionality. Planning a garage addition takes attention to detail and an understanding of design and construction. The structural integrity of the garage addition is one of the most important considerations. If you aren't comfortable with the responsibility, consider consulting an architect on the garage addition project.

Contact the local zoning office for home building projects. Determine the restrictions, building permit requirements and other important details that might affect the garage addition.

Assess the current garage space available. Determine which areas of the garage function well and which areas need improvement.

Identify the uses for the garage. Determine the vehicles you wish to park in the garage, including any boats or RVs. Consider storage, workshop space and other uses needed for the garage. Decide if you want to add a second level to the garage for a loft space or apartment.

Measure the length and width of the current garage. Determine how much additional space you need to accommodate your wish list for the garage. Consider the size of the home, making sure the dimensions of the garage are proportionate to the house.

Draw a sketch of the current garage and the proposed garage expansion. Pencil in the different functional areas of the garage.

Plan the electrical needs for the garage. Expanding the garage may require additional electrical sources. Consider if you will add plumbing, heating or cooling to the area.

See the rest here:
How to Design Garage Additions | eHow

Summary

Electricians inspect electrical components, such as transformers and circuit breakers.

Electricians install and maintain electrical systems in homes, businesses, and factories.

Electricians work indoors and out, in nearly every type of facility. Almost all electricians work full time, which may include evenings and weekends. Although the work is not as dangerous as some other construction occupations, common risks include electrical shocks and burns, cuts, and falls.

Although most electricians learn through a formal apprenticeship, some start out by attending a technical school. Most states require licensure.

The median annual wage of electricians was $48,250 in May 2010.

Employment of electricians is projected to grow 23 percent from 2010 to 2020, faster than the average for all occupations. Homes and businesses require more wiring than ever before, and electricians will be needed to install the necessary components.

Compare the job duties, education, job growth, and pay of electricians with similar occupations.

O*NET provides comprehensive information on key characteristics of workers and occupations.

Learn more about electricians by contacting these additional resources.

Go here to read the rest:
Electricians : Occupational Outlook Handbook : U.S. Bureau of ...

Previously referred to in ASCO as: 431101 Electricians - Supervisor 431111 General Electrician

On this page

Installs, tests, connects, commissions, maintains and modifies electrical equipment, wiring and control systems.

This occupation has a level of skill commensurate with the qualifications and experience in Australia of AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3).

At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

If you require further information on this occupation, please refer to the Australian Bureau of Statistics website. See: Unit Group 3411 - Electricians

Information on the skill level of each occupation is consistent with the Australian and New Zealand Standard Classification of Occupations (ANZSCO) and may differ from the requirements set by the assessing authorities for obtaining a skills assessment. Please contact the relevant assessing authority for your nominated occupation to check on their requirements.

Applicants in this occupation may be eligible for skilled migration under the following programs: Employer Nomination Scheme (ENS), Regional Sponsored Migration Scheme (RSMS), Points Based Skilled Migration visa, Temporary Business (Long Stay) (Subclass 457). See: Employer Nomination Scheme (Subclass 186) Regional Sponsored Migration Scheme (Subclass 187) SkillSelect (Points Based Skilled Migration visa) Temporary Business (Long Stay) - Standard Business Sponsorship (Subclass 457)

A skills assessment is only required for certain visa subclasses in the skilled migration program. Please check whether a skills assessment is required for the visa subclass you want to apply for before contacting the relevant assessing authority.

Under the General Skilled Migration program, some occupations may only be available for state or territory government agency nomination. For a complete list of occupations, refer to the Skilled Occupation List (SOL). See: Skilled Occupation Lists (Formerly Known as Form 1121i)

Read this article:
Electrician (General) - 341111 - Immi

Drywall Bakersfield | Drywall Repair | Drywall installation
Drywall-- MR Drywalloffers Drywall services in Bakersfield, CA. for the following: drywall, drywall repair, drywall installation, drywall finishing contracto...

By: John Conner

Read the rest here:
Drywall Bakersfield | Drywall Repair | Drywall installation - Video

Drywall Anaheim | Drywall Repair | Drywall installation
Drywall-- MR Drywalloffers Drywall services in Anaheim, CA. for the following: drywall, drywall repair, drywall installation, drywall finishing contractors, ...

By: Mathew Josh

Read more here:
Drywall Anaheim | Drywall Repair | Drywall installation - Video

Drywall Services Lawndale 424-354-4110 | Drywall Repair | Drywall installation
Drywall-- MR Drywalloffers Drywall services in Lawndale, CA. for the following: drywall, drywall repair, drywall installation, drywall finishing contractors,...

By: maximillien r

Continued here:
Drywall Services Lawndale 424-354-4110 | Drywall Repair | Drywall installation - Video

Drywall Services Lennox 424-354-4110 | Drywall Repair | Drywall installation
Drywall-- MR Drywalloffers Drywall services in Lennox, CA. for the following: drywall, drywall repair, drywall installation, drywall finishing contractors, p...

By: maximillien r

Continued here:
Drywall Services Lennox 424-354-4110 | Drywall Repair | Drywall installation - Video

Installing drywall can be easy, but taping the joints between panels requires some practice. Some do-it-yourselfers install the drywall themselves, then call an experienced drywall taper to finish the job.

Although it's easy to figure how much drywall to buy (just compute the square footage of the walls and ceiling), it takes some planning to end up with as few joints as possible. The standard-size sheets for walls measure 4 X 8 feet. They are usually installed with the long side running from floor to ceiling, but if you can eliminate a joint by placing them horizontally, do so. All drywall sheets are 4 feet wide, but many building-material outlets offer 10-foot and even 12-foot lengths. The most popular thicknesses of drywall are 1/2 inch (walls) and 5/8 inch (ceilings), but check your local building code for requirements.

Step 1: Construct a pair of T-braces from 2 X 4s about an inch longer than the distance from floor to ceiling. Nail 2 X 4s about 3 feet long to one end of each longer 2 X 4 to form the Ts. Alternately, adjustable T-braces can be rented.

Step 2: Cut drywall panels to size. Use a sharp utility knife along a straightedge to cut drywall. After you make the cut through the face paper, place the board over a length of 2 X 4 laid flat on the floor, or some other type of support, and snap the scored section down. The gypsum core will break along the line you cut. Then turn the panel over, cut the paper on the other side, and smooth the rough edges with very coarse sandpaper on a sanding block.

Step 3: Install drywall panels on the ceiling. If possible, try to span the entire width with a single sheet of wallboard to reduce the number of joints. Position and wedge the T-braces against the drywall sheet to hold it in place until you finish nailing it.

Step 4: Drive nails at 6-inch intervals into all the joists covered by the sheet. Start in the center of the drywall panel and work out. Give each nail an extra hammer blow to dimple the surface slightly without breaking the face paper.

Step 5: When the ceiling is finished, cut and install wall panels. Carefully measure for any cutouts in the drywall, including electrical outlets, switches, or light fixtures. To make cutouts, draw a pattern of the cutout on the wallboard, drill a hole on the pattern line, and then use a keyhole saw to follow the pattern.

Step 6: Space the nails 6 inches apart along studs, but start nailing 4 inches from the ceiling. Butt the wall panels against the ceiling sheets. Dimple all nails. Nail metal outside cornerbeads to cover any outside corners.

Now it's time for the artistic part -- taping. That's covered in the next section.

Original post:
HowStuffWorks "How to Install Drywall: Tips and Guidelines"

Detailed Instructions for Hanging Drywall and Sheetrock Installation

By Mark J. Donovan

Installing Drywall, or hanging drywall as the professionals usually refer to the task, can be done by the homeowner. However, it is usually best done with two or more people as it requires significant lifting of heavy material. Mudding and Taping of sheetrock or drywall can also be performed by the homeowner, however these tasks require some practice and artistry.

Prior to actually installing drywall or sheetrock, the material first needs to be ordered and delivered. To determine how much drywall / sheetrock to order, measure all of the surface area, starting with the ceilings and then the walls.

Calculate the total square feet and divide by 32. The result should give you the number of 4x 8 sheets of drywall / sheetrock required for the job. I would also recommend adding another 5-10% to this figure to account for inefficiencies and waste when installing drywall. Drywall does come in larger sheets, such as 4x12, however for a Do-it-Yourself homeowner these larger drywall sheets can become unwieldy and maybe even impossible to bring into the existing home.

For bathrooms or other moist areas Greenboard should probably be used as this material is moisture resistance.

For bathroom areas where ceramic tile is to be applied, e.g. Shower/Bathtub areas, Concrete board should be used. The concrete board is also referred to as Wonderboard or Durock.

Joint Compound and Fiberglass tape will also be required for Taping and Mudding the installed drywall. Joint Compound typically comes ready-mixed in 5 gallon containers. I would suggest 1-2 containers per 500 square feet of drywall. Fiberglass tape is quite inexpensive so I would suggest picking up 2 to 3 roles for most Do-it-Yourself drywall projects.

Drywall screws or ringed nails will also be required for hanging drywall. Typically I use 1.5 length screws or nails for 1/2" sheetrock, and 1 and 5/8" length screws or nails for 5/8" sheetrock. Also, strips of corner bead will be required.

Follow this link:
How to Install Drywall | Hanging Drywall | Sheetrock Installation ...

How much does it cost to pave a driveway?

One of the easiest ways to make a driveway is to simply clear the land, compress it with heavy machinery and begin using it to gain access to and from a home or building. Is this the best way to go about creating a driveway? Not really, and this is because seasonal conditions and soil erosion will quickly degrade the path and make it either boggy and muddy or bumpy and full of rocks and impediments. It might also be outside of local building codes and regulations too. This is the reason that most home and property owners will eventually pave their driveway with one of several reliable materials. For the purpose of this discussion we will consider the costs of paving a driveway that is roughly 12'x50' (or 600 square feet) in size. Before the paving process can begin, however, the space must be suitably prepared for the work. This requires clearing the area of debris, grading the soil in order to receive the paving materials, creating a base, and then adding the pavement. Clearly this means that paving a driveway is not a DIY option.

According to the RSMeans cost calculation software a standard paving project will include costs such as:

Engineering - whenever driveways have any sort of slopes, curves, or angles in them it usually means that costs are going to increase. Generally this is due to the need for engineering to allow runoff to properly drain away from the home and into the street, and it usually also means more labor in preparing the surface. Additionally, sloped and curved drives involve more materials which only increases the total costs too

Costs to pave a driveway may vary depending on the state or city. To get free estimates from local contractors, please indicate yours.

Go here to see the original:
Cost to pave a driveway | Estimates and Prices at Fixr.com