Categorys
Pages
Linkpartner

    Home Builder Developer - Interior Renovation and Design



    Page 14,884«..1020..14,88314,88414,88514,886..14,89014,900..»



    New Expansion Joint Cover System a Solid, Quick Fix for Renovations

    - February 29, 2012 by Mr HomeBuilder

    InPro Corporation has introduced the new 807 standard cover-plate expansion joint system that is designed to accommodate various flooring thicknesses and finishes from carpet to VCT. InPro's replacement expansion joint covers deliver a quick fix. Most switch-outs can be done in a few hours. You simply remove the old cover and either snap or screw the new InPro joint cover in place. This means little impact on patients or residents, and should have a minimal effect on the operational pace of the facility.

    Milwaukee, Wisconsin (PRWEB) February 28, 2012

    InPro Corporation has introduced the new 807 standard cover-plate expansion joint system that is designed to accommodate various flooring thicknesses and finishes from carpet to VCT. The overlap design also reduces the 807's sightline.

    The often-overlooked expansion joint helps buildings handle the rigors of thermal and seismic movement. A properly installed expansion joint cover can provide years, if not decades of silent service. But, they can take a beating – the joint cover can come loose due to heavy wheeled carts and other traffic, meaning a noisier transition point or possible trip hazard. And it’s not just the floor joints – wall joints can also become scratched by carts and equipment.

    InPro's replacement expansion joint covers deliver a quick fix. Most switch-outs can be done in a few hours. You simply remove the old cover and either snap or screw the new InPro joint cover in place. This means little impact on patients or residents, and should have a minimal effect on the operational pace of the facility.

    InPro offers an extensive line of standard cover plate systems that are a simple retrofit over existing expansion joints. Many come with pre-drilled counter-sunk holes for easy installation. Others are designed to accommodate various flooring finishes or uneven slab conditions. Custom finishes are available on some and others give a low sightline to enhance aesthetics.

    InPro is the nation’s premier manufacturer of building products, offering the most choices and best service in door and wall protection, decorative surfaces, expansion joint systems, cubicle track & privacy curtains and signage & wayfinding. InPro products are used in the healthcare, senior living, hospitality, education, and government sectors.

    The company leads the industry with the first biopolymer wall protection – InPro’s exclusive G2 Blend® made from BioPolyPETG+™ material containing both a biopolymer and recycled content. InPro is a proud participant in the UPS carbon neutral shipping program.

    For more information on InPro Corporation, visit http://www.inprocorp.com, or call 800-222-5556.

    ###

    Evan G. Bane
    InPro Corporation
    262-682-5318
    Email Information

    See the original post here:
    New Expansion Joint Cover System a Solid, Quick Fix for Renovations

    Cooper Lighting and Cooper Controls' Products Accepted into Prestigious 2011 IES Progress …

    - February 29, 2012 by Mr HomeBuilder

    Cooper Lighting
    1121 Hwy. 74
    Peachtree City, GA, 30269
    USA

    Press release date: February 10, 2012

    Ten innovative products, including eight LED luminaires, represent significant product developments and improvements to the lighting industry.

    PEACHTREE CITY, Ga. - Cooper Lighting, an industry leader committed to delivering innovative products and driving transformational technology in the lighting industry, announces that ten of its innovative products have been recognized by the Illuminating Engineering Society (IES) Progress Committee as providing "an advancement in the art and science of lighting." Altogether, Cooper Lighting had nine products accepted - including eight LED luminaires - and Cooper Controls, a business unit of Cooper Lighting, had an additional energy-monitoring product accepted. The products are featured in the 2011 IES Progress Report, which presents significant developments and improvements in the lighting industry over the past year.

    The accepted products include:

    o Cooper Lighting's Neo-Ray Straight and Narrow 22 LED Luminaires, available in three color temperatures and offering a 25 percent energy savings over fluorescent sources, create slender lines of continuous, uniform illumination for recessed, suspended, surface- and wall-mounted applications.

    o Cooper Lighting's Corelite R Mini LED Luminaire is a unique 1' x 1' luminaire that provides a 28 percent reduction in energy with a 10 percent increase in delivered lumens, when compared to a traditional 32W compact fluorescent fixture.

    o Cooper Lighting's Corelite Loft/Element Micro LED Suspended Luminaire, which features independent dimming of the uplight and downlight components, achieves a high luminaire efficacy of 85 lumens per watt (lm/W). Comparable to a 54W T5HO fixture, this design provides a 17 percent reduction in energy with a 7 percent increase in lumens.

    o Cooper Lighting's Halo Stasis LED Luminaire, designed for retail, hospitality and commercial spaces, features tight optical control with minimal spill light and multiple patented field-changeable optical distributions including Spot (15 degrees), Narrow Flood (25 degrees) and Flood (40 degrees).

    o Cooper Lighting's RSA COMBOLIGHT LED Luminaire is the first airtight, IC-rated multiple-head recessed luminaire that offers one to six heads equipped with 18W LEDs and a double-gimbal design that allows the product to tilt 45 degrees in any direction.

    o Cooper Lighting's IRiS? Linear Spread Lens Trim, designed for use in multiple wall wash luminaires including compact fluorescent, halogen and ceramic metal halide sources, utilizes a unique color neutral glass lens technology eliminating the green tint of light found in standard glass. The result is increased optical efficiency with smooth vertical illumination.

    o Cooper Lighting's Metalux Accord LED Series, which evenly distributes the perfect amount of "softer" light, is available in two light levels, multiple color temperatures and boasts an efficacy of 88 lumens per watt (lm/W) with a 50,000 hour rated life. A quick disconnect feature allows for simple future LED upgrades.

    o Cooper Lighting's Halo H4 LED Adjustable Gimbals, the first small aperture (4-inch) adjustable downlights with the appearance and performance similar to a low voltage MR16 gimbal, features interchangeable reflectors with beam distributions of 25, 35 and 50 degrees, four color temperatures and an adjustable 35-degree tilt.

    o Cooper Lighting's Halo 4-inch and 6-inch LED Wall Wash Downlight Trims deliver uniform illumination and are the first residential and commercial grade LED trims of their kind, allowing these trims to be used for both IC and non-IC applications.

    o The Cooper Controls advanced Venergy Advanced Metering System is a code compliant energy saving solution, which monitors energy consumption, is easy to use, specify and scalable across any enterprise.

    The Progress Report submittals, which include new products, applications, research, publications and design tools, are reviewed by the IES Progress Committee. The committee consists of industry experts from all different aspects of the lighting industry with the mission of keeping in touch with developments in the art and science of lighting throughout the world. The committee prepares a yearly review of achievements for the Society. Each submittal goes through a judging process and is evaluated for its uniqueness, innovativeness and significance to the lighting industry. Judging is not based on aesthetics, but focuses on and honors technical advancements.

    The accepted products were presented at the IES Annual Conference in Austin, Texas this past November. The 2011 IES Progress Report was featured in the January issue of the Society's monthly magazine, Lighting Design + Application (LD+A). The Report is also posted on the IES website and is presented by IES Sections throughout the year at section meetings. To view the accepted products, click here to view the Report.

    Cooper Lighting has made a significant investment in people, resources and technology to ensure the company provides first-class solutions to its customers' lighting challenges. The Company offers a range of indoor and outdoor lighting products and controls, all of which are specifically designed to maximize energy and cost savings. For additional information on Cooper's product offering, click here, and for information on Cooper Controls solutions, click here.

    About Cooper Lighting
    Cooper Lighting, a subsidiary of Cooper Industries plc (NYSE: CBE), is the leading provider of innovative, high quality interior and exterior lighting fixtures and related products to worldwide commercial, industrial, retail, institutional, residential and utility markets. As lighting technologies have advanced over the years, Cooper Lighting has been at the forefront of the industry in helping businesses and communities leverage the latest technologies to improve efficiency, reduce costs and enrich the quality of the environment. For more information, visit http://www.cooperlighting.com.

    About Cooper Controls
    Cooper Controls, a business unit of Cooper Lighting, is a market leader in energy management, architectural, and entertainment lighting controls. A subsidiary of global manufacturer Cooper Industries plc (NYSE: CBE), it was formed by its acquisition of Novitas Inc. in November 2005, Polaron plc in March 2007, PCI Lighting Control Systems in August 2007, and ALC Lighting Controls in November 2010. Cooper Controls includes leading brands such as iLight (International), iLumin (North America), Greengate, and Zero 88. For more information, visit http://www.coopercontrol.com.

    About Cooper Industries
    Cooper Industries plc (NYSE: CBE) is a global electrical products manufacturer with 2011 revenues of $5.4 billion. Founded in 1833 Cooper's sustained success is attributable to a constant focus on innovation and evolving business practices, while maintaining the highest ethical standards and meeting customer needs. The Company has seven operating divisions with leading market positions and world-class products and brands, including Bussmann electrical and electronic fuses; Crouse-Hinds and CEAG explosion-proof electrical equipment; Halo and Metalux lighting fixtures; and Kyle and McGraw-Edison power systems products. With this broad range of products, Cooper is uniquely positioned for several long-term growth trends including the global infrastructure build-out, the need to improve the reliability and productivity of the electric grid, the demand for higher energy-efficient products and the need for improved electrical safety. In 2011 fifty-nine percent of total sales were to customers in the industrial and utility end-markets and forty percent of total sales were to customers outside the United States. Cooper has manufacturing facilities in 23 countries as of 2011. For more information, visit the website at http://www.cooperindustries.com.

    Contact:
    Karin Martin, Karin Martin Communications
    (630) 513-8625
    Kmartin41@aol.com

    SOURCE Cooper Lighting

    Read this article:
    Cooper Lighting and Cooper Controls' Products Accepted into Prestigious 2011 IES Progress ...

    Budget architects balk at $150K for Byram pool

    - February 29, 2012 by Mr HomeBuilder

    Architects of the town's budget publicly balked at a $150,000 request Monday for the design of a new community pool in Byram, saying that the scope and overall cost of the public-private project need to be fleshed out first.

    The Board of Estimate and Taxation Budget Committee shared its concerns about what it characterized as a lack of details about the project with key supporters of the pool initiative, led by the Junior League of Greenwich, during a Town Hall briefing.

    Given the finite amount of taxpayer dollars for capital projects and unforeseen soil contamination at Greenwich High School that could cost millions to clean up, committee members said they cannot go forward with funding for the pool design in the near term.

    "It sends the wrong signal to the town at this time," said Joseph Pellegrino, the committee's chairman.

    The powerful arm of the BET will hold its deliberations on a broader $368 million spending package Wednesday, the first of three rungs of the budget process that will continue with the full finance board in March and then the Representative Town Meeting in May.

    Using a combination of private donations and town money, the project's supporters hope to build a 6,000-square-foot pool at Byram Park that can hold up to 300 swimmers.

    The capacity of the existing pool there, which is prone to leaks and has no dedicated restroom facilities, is 40 people.

    "We are still committed to the concept of this project," Anne Miller, the Junior League's president, told the committee.

    Pellegrino sought to allay concerns that the committee does not believe in the merits of the project.

    "By not supporting the $150,000, (the committee) is not killing the project," said Pellegrino, a Republican who is in his first term as the group's chairman.

    Democrat William Finger echoed Pellegrino's comments.

    "This is a worthwhile project," Finger said. "I think that we have a very good basis going forward."

    Democratic Selectman Drew Marzullo, who did not attend the meeting, characterized the decision as penny wise and pound foolish.

    "What I don't get is the notion that $150,000 for continued plans out of a $300 million budget is somehow going to break the bank," Marzullo said in an interview. "The majority of the money (for the pool) will be raised by private donations. I'm concerned that if the perception is that if the town is not behind this project, fundraising is going to be very difficult to do."

    Pellegrino urged the project's supporters to get their ducks lined up so that they could return to the finance board in the fall or next spring for a financial commitment.

    "I'm looking for the scope of the project," Pellegrino said. "I'm looking for the cost of the project."

    Initial estimates have put the pool's price tag at $7 million, a portion of which would be offset by private donations.

    "It's going to be a long, hard slog to raise this kind of money," Miller told the committee.

    The forces behind the pool initiative had planned to use the $150,000 on blueprints that could be incorporated in a fundraising appeal.

    "We just don't want to come to a full stop," Miller said of the progress of the pool initiative.

    Marzullo hasn't stopped lobbying for the pool money.

    "I encourage both the Democrats and Republicans on the BET to support this project," Marzullo said.

    The timing of the pool initiative is less than ideal, with budget architects having earmarked $3.57 million in the proposed budget for an environmental cleanup project at the high school.

    The Comprehensive Annual Financial Report of the town estimated that the price tag of the cleanup could grow to as much as $13 million, fallout from the discovery of polychlorinated biphenylss, after breaking ground on a $30 million performing arts center for the school. A full accounting of the PCB cleanup costs won't be available until at least the fall, however.

    "At that point in time, we will have a better feel for our cash flows," Pellegrino told the pool's supporters.

    The town has already budgeted $55,000 in the current fiscal year for preliminary work on the pool, which the project's supporters were able to augment with $45,000 in prior donations to the Greenwich Parks and Recreation Foundation.

    Of that $100,000, only $25,000 has been spent to date.

    Citing the pro bono work of local landscape architect John Conte and others, Miller said the pool's supporters have been able to keep initial costs in check, a trend that they hope to continue.

    "We don't see this at all as the end of the road by any stretch," Miller told Greenwich Time in an interview after the meeting. "We're going to take a different route than obviously we were hoping."

    Miller said it is not out of the question that the Junior League could kick in some of its own money to help the cause, though it would take a vote of the membership of the women's organization.

    The town isn't the only one eager for a reckoning of the costs of the entire project, according to Miller.

    "There's going to be a reality check point where if it comes in at $2 million we're in, but if it comes in at $20 million, we would have to reconsider," Miller told the committee.

    neil.vigdor@scni.com; 203-625-4436; http://twitter.com/gettinviggy

    Here is the original post:
    Budget architects balk at $150K for Byram pool

    Architects at Populous design some of the best stadiums in the world

    - February 29, 2012 by Mr HomeBuilder

    KANSAS CITY, MO (KCTV) -

    Unless they are torn down, stadiums are one of the few things in life that don't change. Your dad took you to the ball game at the "K" (or Kauffman Stadium) and you'll take your son. Everyone ages and changes, but stadiums are one of the few constants, and many of them, the best ones, come from the minds of people in the fair city of Kansas City.

    It's one of the most influential and important sports businesses in the world and it's right in the middle of the old brick buildings and lofts in Kansas City's River Market area, but athletes with seven-figure salaries don't work here and neither do their agents.

    "This is where it happens. It's an amazing legacy," said Greg Sherlock.

    "When I got this opportunity, I was like, ‘Yeah. This is what I want to do," said Mike Sabatini.

    Architects Sabatini and Sherlock work for Populous, formerly HOK Sport Venue Event, and design some of the best stadiums in the world.

    "I know everybody just drives by, you can see it along the road, and is pumped about it," said Sabatini.

    Sabatini designed jetBlue Park in Fort Meyers, FL. It's the spring training home of the Boston Red Sox and it opened just last week.

    "It's Fenway on the inside, on the exterior it's all about Florida and for them, is was more about ‘we want to build Fenway south," he said.

    With one minor change: fans can actually sit in the green monster in the shade at jetBlue Park.

    "It's a very contemporary-looking building and it really fits the culture of Miami," said Sabatini.

    It started with a tiny sketch, morphed into a wooden model and, on April 4, Marlins Park, the new home of the Miami Marlins, will open. It's a $350 million retractable-roof stadium that is hurricane proof.

    "You can only imagine when you're putting a retracting roof that spans 600 feet on two rails, 10 stories up in the air, how complex of a problem that gets to be from an engineering perspective," said Sherlock. "This outfield wall, it's got this retracting - it's a transparent that retracts. It creates a picture frame of the city itself: the skyline of Miami is right there in the distance."

    Populous has built Olympic stadiums in China, soccer stadiums in Guadalajara and baseball stadiums in the Beltway. Most of the greatest stadiums on Earth have come from the business located in the River Market.

    "I like to tell the story where it really started when the leaders-to-be envisioned the two purpose-built facilities, Arrowhead and Kauffman Stadium. Back in the late 60s was a pretty monumental time in professional sports history and America," said Sherlock.

    Populous did the Kauffman Stadium renovation and, this summer, its handy work in its own backyard will be front and center when the All-Star game is in town.

    "They'll (Major League Baseball) come to town and put on their show and they're showcasing one of your jobs," said Sabatini. "Now you're on the grandest stage of all - the world."

    "I'm still waiting for that ticket," said Sherlock.

    Copyright 2012 KCTV (Meredith Corp.) All rights reserved.

    Read this article:
    Architects at Populous design some of the best stadiums in the world

    Jefferson Parish schools committee hears complaints from architects, engineers

    - February 29, 2012 by Mr HomeBuilder

    Amid complaints that architects and engineers on public school projects are not fairly paid for their work , a Jefferson Parish School Board committee is looking into revising the contract they sign when they accept a job.

    Much of the issue centers on unreasonably low bids by some construction contractors, who later increase the budgeted amount through change orders. Architects and engineers typically take in 7 percent to 10 percent of the original construction budget, but on Tuesday they said their fees should be based on the actual cost of construction, including change orders.

    "Oftentimes we are the victim of a contractor who bids a project too low," architect Russell Burgdahl of Burgdahl & Graves told the School Board's facilities committee. "All it does is increase our work level because he is constantly coming up with ways to add money to the job."

    Governments are allowed to choose any qualified architect or engineer, regardless of price, and critics say this leads to politicians picking their campaign contributors for the professional work.

    But state law requires public entities to accept the lowest qualified bid on construction work. While none of those appearing before the committee Tuesday suggested doing otherwise, Steven Graves of Burgdahl & Graves said, "Sometimes, it's our worst nightmare."

    Graves suggested that professional service fees be based on an average of all the bids received. "That would make sense," he said. "Then you find the true value of the project."

    Neither the professionals at Tuesday's meeting nor committee members gave examples of the change-order problem.

    But a Feb. 1 capital project status report on Jefferson schools lists several projects with multiple change orders. Examples are six change orders on a roofing project at Harry S Truman Middle School in Marrero, five on two projects at Ella Dolhonde Elementary in Metairie and 11 for an athletic complex and other work at East Jefferson High in Metairie. In all three cases, contractors exceeded the budgeted amount by hundreds of thousands of dollars.

    Architects and engineers said change orders are often necessary, especially when they involve renovations to some of the school system's oldest campuses.

    "When we are assigned a project, it may be a 50-year old building," said Rick Meyer of Meyer Engineers. "And we may find an unforeseen item that needs to be repaired. There will be change orders. We just hope they are reasonable."

    Board member Etta Licciardi, who chairs the facilities committee, described the meeting as "productive and enlightening.

    "I understand your concerns," she said. "And it is certainly my hope that the document we end up with will meet your needs and the needs of the school system."

    Afterward, she and board member Larry Dale said revisions to the professionals' contract are long overdue.

    Besides changing the fee structure, the committee is studying such issues as project schedules, professional liability insurance, liquidated damages and errors and omissions.

    Licciardi said the committee plans to consult the American Institute of Architects and the Louisiana Office of Facility Planning and Control's contract to come up with the fairest agreement.

    . . . . . . .

    Barri Bronston can be reached at bbronston@timespicayune.com or 504.883.7058.

    Visit link:
    Jefferson Parish schools committee hears complaints from architects, engineers

    Remodeling will make jewelry store smaller

    - February 29, 2012 by Mr HomeBuilder

    CHAMPAIGN — Christopher's Fine Jewelry Design in downtown Champaign has closed for remodeling and expects to reopen later this week in a smaller space.

    Co-owner Lois Wacholtz said the store plans to keep its frontage at 124 N. Neil St., C, but lease out the back portion.

    As for what customers can expect to see once remodeling is done, Wacholtz said: "The windows will stay the same. There will be more wall (display) cases and fewer floor cases, and a fair amount of new inventory when we're up and running."

    When complete, the retail space will be about 900 square feet, compared with the 2,000 square feet the store had before, she said.

    Wacholtz said she and co-owner Christopher Jupp had been thinking about shrinking the space for a couple years.

    "There's no real need to have as much inventory on hand as there used to be," Wacholtz said. "Our focus more and more the last several years has been custom design and custom orders."

    Customers love to look at jewelry, she said, "but more and more, they're taking ideas away and having them custom-produced. It just became obvious we didn't need as much display space on hand for inventory."

    Wacholtz said she hopes to rent out the back of the building, perhaps for a restaurant.

    "We plan to put a doorway in on the Taylor Street side, so it's accessible from that side," she said.

    That entrance would be just east of the stairwell that leads down to Christopher's production studio, she added.

    Wacholtz said she expects the store to reopen Friday or Saturday, but if customers need Christopher's services before then, they can call.

    "We won't be completely finished, but we'll be open by the end of the week again and have out as much as we can," she said.

    More here:
    Remodeling will make jewelry store smaller

    Prestigious Intersolar AWARD to Honor Solar Projects in North America

    - February 29, 2012 by Mr HomeBuilder

    SAN FRANCISCO, Feb. 28, 2012 /PRNewswire/ -- Intersolar North America, the premier solar industry exhibition and conference in North America for solar professionals to exchange information and develop business opportunities in the U.S. solar market, is featuring next-generation solar products and cutting edge technologies from exhibitors from across the globe. The solar industry's most prestigious innovation prize, the Intersolar AWARD, will now feature a new category that will recognize landmark solar projects within North America.

    (Logo: http://photos.prnewswire.com/prnh/20100602/ISLOGO)

    Applications for the 2012 Intersolar AWARD are open now until March 30, and exhibitors of Intersolar North America 2012, Intersolar Europe 2012, Intersolar China 2011 and Intersolar India 2011 are invited to apply. Winners will be chosen based on their project's innovative strength and outstanding services and products. The 5th anniversary of the Intersolar AWARD will see the jury award up to three winners from categories of "Photovoltaics," "Solar Thermal Technologies" and "PV Production Technologies." With the addition of the new category, "Solar Projects in North America," exhibitors will have the opportunity to submit their groundbreaking and unique projects for consideration and will have the potential to play an exemplary role in developing and increasing the significance of solar energy, providing a model for the future. The category will be rolled out to different markets as well, including solar projects in China and India.

    Categories eligible for submission include "Solar Building," "Industrial and Commercial Use," as well as "Utility Scale Projects." The Intersolar AWARD in this category will be presented as part of Intersolar North America in San Francisco on July 10, 2012.

    A total of 301 innovations from 25 countries have entered for the Intersolar AWARD since it was established. Each year sees an increase in the quality of the applications – this industry award shines a light on the winners and their products for the entire global solar industry to admire. With the new category specifically aimed at North American innovation, this year will reflect the talent and innovation coming out of the North American market.

    Shining a Light on North American Solar

    An expert jury, made up of specialists from science, industry, research and trade media, selects the winners from each category. Below is a breakdown of categories and sub-categories for nominations:

    Photovoltaics Products, Services or Solutions Solar Thermal Technologies Products, Services or Solutions PV Production Technologies Products, Services or Solutions Solar Projects in North America Solar Building: Building integration (zero-energy and energy-plus concepts) of photovoltaics and solar thermal technologies to generate electricity, heat and cooling for buildings. The primary consideration will be how concepts are implemented from aesthetic and architectural points of view. Industrial and Commercial Use: The use of solar energy for industrial production and supplying commercial buildings. Utility Scale Projects: PV power plants (commercial installations and large-scale power plants) and solar thermal power plants.

    The Intersolar AWARD for "Photovoltaics," "Solar Thermal Technologies" and the category "PV Production Technologies" will be presented during an official ceremony on June 13, 2012 at 4:30pm at Intersolar Europe in Munich. The winner of the "Solar Projects in North America" category will be announced on July 10, 2012 at Intersolar North America in San Francisco at Moscone Center.

    Companies wanting to be considered for the Intersolar AWARD can register on the Intersolar North America website under "Exhibitor Service", "Marketing + Promotion", then menu item "Intersolar AWARD". All applications must be submitted by March 30, 2012.

    Visit the Intersolar website at http://www.intersolar.us/
    Join the Intersolar North America conversation, follow live updates from the show floor with http://www.facebook.com/Intersolar and #Intersolar

    About Intersolar
    With over 3,500 exhibitors and 120,000 visitors spanning three continents, Intersolar is the world's leading exhibition series for the solar industry.

    Intersolar North America takes place annually in San Francisco's Moscone Center. Since its establishment in 2008, the exhibition and conference have developed into the premier platform for the solar industry in North America. Intersolar North America focuses on photovoltaics and solar thermal technologies and is co-located with SEMICON West. It has quickly established itself among manufacturers, suppliers, distributors and service providers as an international industry meeting point.

    In total, 834 exhibitors and 19,168 trade visitors participated in 2011. The conference featured 30 sessions with 220 speakers and catered to 1,617 conference attendees.

    Intersolar's storied history of international exhibitions and conferences spans more than 20 years. Taking place in addition to Intersolar North America are Intersolar India in Mumbai, and Intersolar China in Beijing, which was launched in 2011. The world's largest exhibition for the solar industry is Intersolar Europe in Munich.

    For more information on Intersolar North America please visit:  http://www.intersolar.us/

    See the rest here:
    Prestigious Intersolar AWARD to Honor Solar Projects in North America

    Oltmans Construction Co. Completes Construction of The Crossing Campus

    - February 29, 2012 by Mr HomeBuilder

    COSTA MESA, Calif., Feb. 28, 2012 /PRNewswire/ -- Oltmans Construction Co., a leading U.S. industrial and commercial general contractor, announced today the final construction of an auditorium for The Crossing Church.

    "We are honored to have been selected to build this significant addition to The Crossing Campus," said Dan Wozniak, senior project manager, Oltmans Construction Co. "At 22,000 square feet on three levels, this multi-flex facility combines stunning architecture, a variety of building materials and innovative use of technology."

    The auditorium features contemporary architectural design throughout the interior and exterior by creatively integrating basic building materials to acoustically control the environment.  It creates a beautifully blended atmosphere with a continuous flow into the open plaza courtyard spaces where a stunning arrival courtyard fountain welcomes people into the building.

    "Oltmans, its subcontractors and consultants did a phenomenal job to make this project happen," said Tim Celek, lead pastor. "Without a doubt, the quality and craftsmanship executed is of the highest order. Any organization looking at a construction project would be well served by including Oltmans on its team.  They will not disappoint."

    The auditorium, with seating for up to 1,500 people, is further enhanced by the state-of-the-art interior and exterior audio-visual systems.  The technology encourages individual attendees to actively participate and interact together in real time.

    "Use of acoustically absorptive materials in the roof, wall, ceiling and balcony areas brings the entire Crossing plaza complex alive by producing exceptional high-tech quality sounds that can be distinctly heard both inside and out," Wozniak said.

    About Oltmans Construction Company

    Oltmans is a leading U.S. general contractor providing quality services and sustainable solutions for its customers. Marking its 80th year in business, Oltmans specializes in constructing warehouse distribution centers, office buildings, worship centers, interior tenant improvements, retrofitting existing buildings and renewable energy projects. The company is based in Whittier, California. For additional information about Oltmans Construction Co., please visit our website at http://www.oltmans.com.

    Follow Oltmans on Twitter at http://twitter.com/Oltmans.

    See original here:
    Oltmans Construction Co. Completes Construction of The Crossing Campus

    WM Adds Waste Transport Firm

    - February 29, 2012 by Mr HomeBuilder

    Waste Management Inc.’s (NYSE:WM - News) subsidiary Waste Management of West Seneca has acquired Reliable Environmental Transport (“RET”), one of the most respected full-service hazardous/non-hazardous waste transportation firms in the Tri-State area. The acquisition will provide Waste Management a leading edge in servicing customer needs.

    Bridgeport, West Virginia based Reliable Environmental Transport caters to key industries such as Gas & Oil, Utility Companies, Pulp and Paper, Waste Treatment Plans, Steel Manufacturing, Railroad Companies, Convenience Stores and Environmental Engineering & Architectural Firms. It services and holds waste transportation permits in various states of the North East. These states include, but are not limited to West Virginia, Ohio, Pennsylvania, Maryland, New York, and Virginia.

    The president of RET, Jonathan Marks, will now be director of gas and hazardous waste services for West Management’s Upstate New York, Western Pennsylvania and West Virginia market.  

    Waste Management offers single-source environmental management services to oil and natural gas producers that include transportation, storage, recycling, treatment and disposal processes. The acquisition is a strategic fit for the company.

    Waste Management’s adjusted EPS in fiscal 2011 was $2.14 compared with $2.09 in the previous year, surpassing the Zacks Consensus Estimate of $2.11 and at the low end of the company’s guided range of $2.14–$2.18.  Revenues increased 7% to $13.4 billion, ahead of the Zacks Consensus Estimate of $13.3 billion.

    Waste Management expects 2012 adjusted EPS to lie between $2.22 and $2.30. The Zacks Consensus Estimate stands at $2.27. Internal revenue growth from yield on the collection and disposal business is expected to be in the range of 1.0% to 1.5%. Yield in the second half is expected to improve from the first half. Internal revenue growth from volume is expected to be flat to slightly positive.

    Waste Management’s ability to cut costs will help in maintaining profits despite weak volumes. Lower trending recycling prices, lower volumes, commodity headwinds and continued margin deterioration nonetheless remain causes of concern. Backed by its strong cash flow, the company has increased its dividend for eight consecutive years.

    The acquisition of Oakleaf Global Holdings in 2011 will provide North American customers with unprecedented access to waste and recycling solutions by pairing the largest network of directly owned hauling, recycling, diversion and disposal assets with the largest managed third-party network.

    Waste Management is the largest provider of comprehensive waste management services in North America. The company provides collection, transfer, recycling and resource recovery, as well as disposal services to nearly 20 million residential, commercial, industrial and municipal customers. It competes with Republic Services, Inc. (NYSE:RSG - News) and Casella Waste Systems Inc. (NasdaqGS:CWST - News). Waste Management currently maintains a Zacks #3 Rank (Hold) on its stock for the short term.

    Read the Full Research Report on WM

    Read the Full Research Report on RSG

    Read the Full Research Report on CWST

    Zacks Investment Research

    More From Zacks.com

    Continue reading here:
    WM Adds Waste Transport Firm

    PM's payback for Rudd's mates

    - February 29, 2012 by Mr HomeBuilder

    Key cabinet ministers are in the firing line after voting for Kevin Rudd in yesterday's leadership spill. Picture: Ray Strange Source: The Daily Telegraph

    KEY cabinet ministers are in the firing line for "payback" after voting for Kevin Rudd in yesterday's leadership spill.

    Senior government sources confirmed Robert McClelland is expected to be dumped from cabinet in a reshuffle to be announced by Julia Gillard before the end of the week.

    But Immigration Minister Chris Bowen is expected to be spared.

    The PM will now also be forced to find a replacement for another NSW ministerial vacancy created by the shock resignation of Mark Arbib.

    Ms Gillard yesterday would not rule out demotions of key cabinet ministers who supported Kevin Rudd, claiming any changes would be based on merit.

    This morning the PM still wouldn’t speculate on her ministry or rule out payback.

    "I will judge my team the way I’ve said that I’m going to judge it: on merit and the capacity to take the fight up to the other side of politics," Ms Gillard told ABC Radio’s AM program.

    "That’s what will drive my decision."

    Ms Gillard said she would announce the ministry reshuffle in her own time.

    Stephen Smith or Simon Crean are considered the likely candidates to replace Mr Rudd as foreign minister.

    However, Mr Bowen was also named as a potential promotion into the job, not only on merit but as a gesture of unity.

    "The next big challenge for us is how we challenge this reshuffle," a senior source close to the PM's office said.

    "You would have to think Robert has to go. She wanted to do it last time but wasn't allowed.

    "The problem is, can you have any confidence in the PM's office to manage considering the disaster of the last reshuffle."

    Mr Rudd yesterday prevailed on caucus not to punish his supporters.

    "My final request of the leader is no retribution against my supporters," he said. "They are good Labor people, every one of them."

    Trade Minister Craig Emerson will act in Mr Rudd's role until a decision about the reshuffle - and could himself be in line to take the job permanently.

    A spokesman for Mr Smith, who was foreign minister under Mr Rudd said: 'This is entirely a matter for the prime minister."

    Ms Gillard will continue with a divided inner sanctum with some of Mr Rudd's backers, such as Martin Ferguson, set to stay on.

    Leader of the house Anthony Albanese's office confirmed he would remain in the chief parliamentary head-kicking role after Ms Gillard had refused to accept his resignation.

    "I would hope Julia Gillard would want to see me continue in the cabinet," Mr Bowen said.

    "But that would entirely be a matter for the prime minister of the day and I will serve in any cabinet capacity for either of them."

    Mr Ferguson is considered a valuable asset to the government and said: "I will always serve the Labor Party."

    It was unclear what will happen to Manufacturing Minister Kim Carr who was demoted in last December's botched reshuffle.

    By retaining Ms Gillard as leader, the party avoided an exodus of ministers with Attorney-General Nicola Roxon and School Education Minister Peter Garrett declaring they would not serve as ministers if Mr Rudd was re-elected.

    Treasurer and Deputy Prime Minister Wayne Swan may also have refused to serve Mr Rudd.

    David Bradbury and former defence minister Joe Fitzgibbon have been named as MPs from the NSW Right who could replace Mr Arbib and Mr McClelland.

    Opposition Leader Tony Abbott, meanwhile, said yesterday’s leadership battle had changed little, saying Australia today had the "same untrustworthy" PM and the “same dud policies” as it did yesterday, before the spill.

    "This isn't a new start for the prime minister it is just a stay of execution," Mr Abbott said.

    Mr Abbott said Mr Rudd was still "nursing ambition".

    "We know that Bill Shorten has an enormous opinion of himself, we know that Simon Crean and Stephen Smith were auditioning last week, and they will be waiting for this prime minister's first stumble," he said.

    "I think the Australian people are desperate for better government. I think they know that we are better than this. I think they know that we are a great country which has been badly let down by a poor government getting worse."
     

    Read more:
    PM's payback for Rudd's mates

    « old Postsnew Posts »ogtzuq

    Page 14,884«..1020..14,88314,88414,88514,886..14,89014,900..»


    Recent Posts