Home Builder Developer - Interior Renovation and Design
-
February 14, 2012 by
Mr HomeBuilder
All this time you’ve assumed that you can’t afford the home you really want: The cozy, comfortable house with all the neat features that you want to get your hands on, stuff like slate countertops; the island range with the stainless steel hood; the rustic beams on the ceiling. Oh, and some really cool lighting fixtures and a tiled shower with two shower heads.
Woo Hoo!
And you know you can’t afford that house because you’ve looked around and nobody’s building that cool house for less than a biodiesel-powered truckload of Krugerrands.
You know that the only way to hold down construction costs on a house is to strip all the niceties away.
The only reasonably priced homes for sale in your area are disposable vinyl and Styrofoam junk or ugly piles of brick and drywall
You’re half right. A typical builder’s “spec” home price gets into the stratosphere when you add all the goodies. But, the good news, you’re half right, too! The reason most houses get ridiculously expensive is that they’re pretty poorly planned.
Plan better – WAY better – and you can get what you want and keep those gold coins in your pocket.
Here are seven ways to beat the high cost of construction and home improvement:
1) Smaller is Smarter (Really?)
The summit of obviousness, making a home smaller makes it less expensive. But random hacking away with a machete is the wrong approach – we need a scalpel and a surgeon. So think carefully about redundancy – why do you need a dining room AND a breakfast room AND five stools at the kitchen counter? A living room AND a study AND a family room AND a sitting area in the master suite?
Most of these uses can be combined into the same space – one nice large place to eat, for example.
Think about your furniture and how you arrange it – when you don’t know how a room is going to be used you usually make it much too big.
Carefully trim out the wasted, unused space and put the cash into that homey board-and-batten wainscot you love. Or lots and lots of chocolate.
2) Efficient Use Of Building Materials
Way back when, some really smart guys figured out that if building materials were all designed on a common module, they wouldn’t have to use or waste so much of it. So sheets of drywall and plywood are both 8 feet tall and 4 feet wide. Which works great on an 8-foot x 16-foot wall, but not so good when it’s 9.5-feet x 17 feet.
Lots of wasted material!
For the same reasons, structural lumber for floors comes from the mill in 2-foot increments. So whose idea was it to make rooms 13-feet wide? Design your house as much as possible on the established modules of building materials and stop filling the dumpster with scrap!
3) Use It Where It Counts, Don’t Use It Where It Doesn’t
I visited Steve Wynn’s Treasure Island Resort in Las Vegas a few years back and remember how impressed I was that the décor in the bathrooms in the furthest back corner of the casino was just as nice as the décor in the baths up front.
But Steve Wynn has a net worth of $2 billion. You probably don’t. So while I hope you become a billionaire, don’t spend like one just yet. Go ahead, put the granite countertops in the kitchen and the master bath, but not in the laundry room. (A classic “Parade of Homes” head-scratcher, that one.)
And your kids can do without solid brass faucets, crown molding, and a hand-painted tile backsplash in their bath. (Go ahead, ask them – they don’t care!)
Same with carpet. Nice stuff in the family room, cheaper everywhere else. Put the money in finishes and fixtures you’ll enjoy every day.
P.S. – Steve Wynn still has his $2 billion AND a hundred bucks of mine.
4) Design for Low Maintenance
This one sounds like a paradox: Spend more here to save more later. Cheap siding, roofing, and windows will cost you way more in the long run than quality components will now. There are entire industries built around the hope that you’ll buy replacement windows and a new roof for your house someday, probably much sooner than you think.
Quality is the tortoise in this race. Do it right the first time.
5) Lower Your Energy Bills – Dramatically
This goes way beyond insulation, Argon-filled glass, and geothermal systems, and will be the subject of a lengthy article in the near future. In the meantime, don’t make the mistake of designing a home that isn’t climate- or site-specific and try to force it to be highly energy efficient – you’ll be addressing less than half the problem.
The real problem you need to solve is how your house DESIGN responds to the climate and the site. For example, don’t put a big wall of glass facing prevailing winter winds where the heat will get sucked out like a black hole.
Remember your 7th-grade geometry, how a square encloses the most area with the least perimeter. Remember how you thought you’d never need to know that? Turns out it comes in handy! So call up your old math teacher and tell her she can be proud because you’re going to use that knowledge in your house design. You’re going to enclose your new highly-efficient floor plan in a relatively square footprint and reduce your heat loss with fewer building materials!
Do this right and you get a big bonus – a tight, energy-efficient house doesn’t need an expensive geothermal heating system at three times the cost of a conventional furnace. Cha-CHING!
Bonus #2 – that square box is going to be better-looking, too…read on.
6) Boxy is Bee-you-tee-full
We have millions of really great-looking homes in this country, though most were built over 70 years ago. The designers and builders of the first American suburbs were experts at making simple homes elegant and attractive.
Good-looking homes are very often based on relatively simple box forms, properly proportioned, composed, and detailed.
Today, too many designers compensate for their lack of skill by loading the exteriors up with as much stuff as they can – gables, complex roof forms, heroic-scaled arched windows, inappropriate details, etc. Lots of money spent and nobody benefits but the home builder (and the replacement-window guy I mentioned above.)
Keep the house forms simple and you’ll save a ton of green on the building materials. Look to the early 20th century suburbs for inspiration and lessons on the elegant simplicity of the box. You’ll have a better looking home that you can be proud of.
7) Good Design Sells
Speaking of good looking, energy-efficient, less expensive, low maintenance, smaller homes, guess what? They sell faster and for more money! Now that’s what I’m talkin’ about!!
My all-time favorite blow-my-own-horn story is of my client who (8 years later) sold his house in two weeks – without a real estate agent – for twice what he paid to have it built. All he did was stick a sign out front. The buyer said it was the uniquely functional and interesting floor plan and irresistible exterior design that sold him on it.
How happy do you think he is that he invested in better design?
Read more:
Richard Taylor is a residential architect based in Dublin, Ohio and is a contributor to Zillow Blog. Connect with him at http://www.rtastudio.com/index.htm.
Note: The views and opinions expressed in this article are those of the author and do not necessarily reflect the opinion or position of Zillow.
Read the original:
Seven Ways to Beat the High Cost of Home Building
Category
Countertops | Comments Off on Seven Ways to Beat the High Cost of Home Building
-
February 14, 2012 by
Mr HomeBuilder
Katarina and Tom love the character and charm of their 100-year-old house, but they admit that adapting the century home to modern-day living was a bit of a challenge. Back when the house was built, one common living room was all anyone ever needed.
Fast forward to 2012, and it's a totally different story. Katarina, Tom and their two rambunctious boys have just one space in which to live, play, work and entertain. The family's attempt to introduce the trappings of modern living into this stately old space resulted in a jumble of multipurpose furniture and a mishmash of electronic equipment, with wires and cables snaking everywhere across the floor.
There's no doubt this room presented several design challenges — among them, a lack of usable wall space, which was broken up by windows, doors, radiators and a nonfunctioning fireplace. I definitely had my work cut out for me, but I do enjoy a challenge. So I devised a plan that merges old with new, and tradition with technology.
First, we tackled the fireplace. It hadn't been used in 50 years, so we expected it would need work — we just didn't realize how much. We had to call in a chimney expert to repair and insulate the exterior brickwork and insert a stainless-steel liner down the entire length of the chimney. Just when we thought we were done, we discovered that the hearth was not structurally sound. In fact, it was ready to fall into the basement. Major repairs were needed before we could even contemplate bringing in the new gas-log set I had ordered.
As you would expect, Katarina and Tom's living room featured a plaster ceiling and walls. The room had only one dim ceiling light, and I wanted to brighten things up by installing recessed lights and a couple of elegant wall sconces, along with state-of-the-art, ceiling-mounted speakers. We replaced the old ceiling with a more modern equivalent, but applied molding to give it a traditional look. The walls were covered in elegant, glass-beaded striped wallpaper, which is the perfect backdrop to this multitasking space.
One of the things that Katarina and Tom love about their century home is the radiator heating system, but the heating elements took up quite a bit of space. The solution was to construct customized covers, which conceal the heating elements behind a stylish screen while creating much-needed display surfaces.
Throughout this project, the emphasis was on using each and every square inch of space, and the custom cabinetry I designed for the perimeter of the room is no exception. The cabinets house the family's audio and video equipment and provide a surface to display lamps, pictures and accessories. Katarina's desk is flanked by lots of shelving, providing plenty of storage for files and books. Best of all, the cabinets hide the unsightly wires and cables from all the modern gizmos and gadgets.
I positioned a rich brown sectional sofa directly across from the now-functional fireplace and added a couple of comfortable yet classy chairs and an ottoman to round out the room's seating. The thin legs and open bottoms of the antique-mirror coffee table and side tables help create a feeling of spaciousness. The traditional shape of the mirror over the mantle evokes the room's historical roots, while the woven wooden window shades work to transition the eye from the beautiful gardens outside to the elegance inside.
Katarina and Tom had become bogged down by the challenge of introducing modern technology into the living room of their stately old home. The space was full of promise, but also full of problems. A multitasking theme was central to this design. Space-saving solutions and cutting-edge equipment, combined with just the right emphasis on tradition, brought this living room into the modern age without sacrificing any of its classic style.
Interior decorator Candice Olson is host of HGTV's "Candice Tells All." For more ideas, information and show times visit http://www.hgtv.com/candice-tells-all/show/index.html.
See the rest here:
Design: Century-old living room gets a modern twist
Category
Interior Decorator | Comments Off on Design: Century-old living room gets a modern twist
-
February 14, 2012 by
Mr HomeBuilder
By Steve Cook Print Article
Homeowners are ready to make 2012 a banner year for remodeling and the latest cost-for-value research suggests that getting the most bang for every buck is more important than ever.
The Remodeling Market Index (RMI) hit a five-year high at the end of 2011, indicating that residential remodeling should continue to grow in 2012, according to panelists at a press conference at NAHB’s International Builders’ Show. After a slow start, home improvement spending is expected to trend up later this year, according to the Leading Indicator of Remodeling Activity (LIRA) released by the Remodeling Futures Program at the Joint Center for Housing Studies of Harvard University. If this momentum continues to build during the second half of the year, remodeling activity is on course to end 2012 on a positive note.
However, consumers want to get the most for their money.
Remodeling Magazine’s annual Cost vs. Value report for 2011-2012 found that the trend right now is replacement over remodeling—swapping out the old for the new rather than doing a total gut job, which can be much more costly. Exterior replacement projects—such as new garage doors and a new entry door—offer some of the best returns at resale, allowing home owners to recoup close to 70 percent or more of the costs of the project at times of resale.
The following are the top, mid-range projects from this year’s report, based on what home owners stand to recoup at time of resale:
1. Replacing the entry door to steel
Estimated cost: $1,238
Cost recouped at resale: 73 percent
2. Attic bedroom (converting unfinished attic space into a bedroom with bathroom and shower)
Estimated cost: $50,148
Cost recouped at resale: 72.5 percent
3. Minor kitchen remodel (including new cabinets and drawers, countertops, hardware, and appliances)
Estimated cost: $19,588
Cost recouped at resale: 72.1 percent
4. Garage door replacement
Estimated cost: $1,512
Cost recouped at resale: 71.9 percent
5. Deck addition (wood)
Estimated cost: $10,350
Cost recouped at resale: 70.1 percent
6. Siding replacement (vinyl)
Estimated cost: $11,729
Cost recouped at resale: 69.5 percent
For more information, visit http://www.realestateeconomywatch.com.
Copyright© 2011 RISMedia, The Leader in Real Estate Information Systems and Real Estate News. All Rights Reserved. This material may not be republished without permission from RISMedia.
Read more:
Remodeling Looking up in 2012
-
February 14, 2012 by
Mr HomeBuilder
courtesy HWKN
Wendy by HWKN, Matthias Hollwich and Marc Kushner of New York, has been selected as the winning project in the Museum of Modern Art (MoMA) and MoMA PS1’s annual Young Architects Program. Meeting criteria for innovative design that addresses environmental issues, including sustainability and recycling, the installation will be the featured urban landscape at the museum’s outdoor 2012 Warm Up Summer Music Series.
As per competition guidelines, the architects designed a structure that provides shade, seating and water for the PS1 outdoor courtyard in Long Island City, Queens. Spikey arms resembling star prongs create micro-environments with blasts of cool air in one section, music in another, water cannons and misting in yet another. In addition to meeting functional demands creatively, Wendy’s construction improves the environment in a literal sense. It’s nylon fabric is treated with a titania nanoparticle spray that neutralize airborne pollutants and will clean the air to the equivalent of taking 260 cars off the road throughout its temporary installation.
“By combining off-the-shelf materials and scaffolding systems with the latest cry in nanotechnology it is able to produce both an out-of-the-box ecological statement and a bold architectural gesture,” says Pedro Gadanho, curator in MoMA’s department of architecture and design. “It is economical and terse in terms of its design, and yet, through its positioning and scale, it also smartly projects different possibilities for use and social appropriation across the entire site where it sits—including the ability to reach out for those outside the museum’s walls.”
A 70x70x45-foot scaffold defines a large surface area that spills over the PS1 courtyard walls with volume that is sure to add to the east Manhattan skyline, in addition to enhancing the already colorful Long Island City scape.
To learn more about the Young Architects Program, visit MoMA.org/YAP.
See the original post:
MoMA's Young Architects Program Names HWKN for Winning Project
Category
Architects | Comments Off on MoMA's Young Architects Program Names HWKN for Winning Project
-
February 14, 2012 by
Mr HomeBuilder
IRVINE, Calif., Feb. 13, 2012 /PRNewswire/ -- IA Interior Architects (IA) is pleased to announce that Lisa Kelly, AIA, has joined the firm as Project Director. She will be based in Orange County.
Lisa brings nearly 20 years of experience to IA. Most recently with Meridien Partners, she gained expertise working in China and the Middle East on hospitality projects. In her new role, Lisa will be responsible for planning, coordinating, and managing projects. As a senior staff member, she will be responsible for identifying and pursuing new business opportunities, working closely with IA's Workplace Strategies Team, and leading and mentoring staff. Lisa is a registered architect in the State of California.
"Having Lisa join IA was part of our vision to significantly expand IA's expertise and reach for 2012 and beyond. Her years of experience combined with her leadership and international portfolio better position us to grow the practice and be of service to our clients locally and abroad," says Brian Koshley, Managing Principal, Orange County.
"What drew me to IA was the idea of interiors-only architecture. IA has embraced interior architecture and allowed designers to hone their craft. As a result of this singular focus, IA excels above its competitors in all areas of service and design. I am excited to be part of such a vision," says Lisa Kelly.
About IA Interior Architects
Founded in 1984, IA Interior Architects is the first and largest global architectural firm focused exclusively on interior architecture and workplace strategies. IA helps clients in diverse markets worldwide align their business strategies and core values with the dynamic use of space. IA has offices in Atlanta, Boston, Chicago, Dallas, Denver, London, Los Angeles, New York, Orange County, Raleigh, San Francisco, Seattle, Silicon Valley, and Washington, DC and has partner affiliates in Europe, Middle East and Africa, Asia and Australia, Canada, and Latin America through the IA Global Alliance. For more information, visit http://www.interiorarchitects.com.
Press Contact:
Sofia Zimmerman
917.579.5702
s.zimmerman@interiorarchitects.com
Read more from the original source:
Lisa Kelly Joins IA Interior Architects in Orange County, CA
Category
Architects | Comments Off on Lisa Kelly Joins IA Interior Architects in Orange County, CA
-
February 14, 2012 by
Mr HomeBuilder
February 13, 2012, 11:42 PM EST
By Zainab Fattah
(Adds Dubai Mall expansion in second paragraph, Emaar chairman’s comment in ninth.)
Feb. 13 (Bloomberg) -- Dubai’s developers, battered by three years of falling prices for homes and offices, are seeking refuge in retail assets as shopping tourism powers the economy.
Emaar Properties PJSC said today it’s expanding the Dubai Mall, the world’s biggest, by 1 million square feet (92,903 square meters) as retail accounts for a growing share of the company’s income. Nakheel PJSC, the government-owned company that restructured $16.1 billion of debt last year, is adding to its Dragon Mart shopping center and trying to raise funds to build a cluster of restaurants and stores at the tip of its Palm Jumeirah artificial island.
“Most developers are looking to build recurring revenues because there are so few property sales happening right now,” said Patrick Gaffney, an analyst at HSBC Bank Middle East Ltd. “The sectors that are doing best are retail and hotels because of strong tourist arrivals.”
Dubai’s malls and shops have become more attractive after home values fell by more than 65 percent from their 2008 peak while retail sales have been rising since 2009. Developers that don’t already generate significant revenue from shopping assets will struggle to get a foothold in the market because little is being built or sold and banks are reluctant to finance any type of development in the emirate, including retail, Gaffney said.
Retail revenue in the United Arab Emirates probably increased 5.3 percent last year to 113 billion dirhams ($31 billion) Business Monitor International estimated. That will probably rise to 120 billion dirhams this year and 157 billion dirhams by 2015, it said.
Biggest Mall Owner
Majid Al Futtaim Holding LLC, the operator of Carrefour SA stores in the Middle East, is the largest owner of shopping malls in Dubai. The closely held developer this month raised $400 million selling Islamic bonds for the first time as part of a $1 billion program. Last month the company reported an 18 percent increase in revenue in its home market and said 2011 was its most successful year since being founded in 1992.
Majid Al Futtaim priced its $400 million, five-year Islamic bond, or sukuk, at a rate of 5.85 percent on Jan. 31. The yield rose 4 basis points since it started trading this month to 5.66 percent today. That compares with a yield of 7.4 percent for Emaar’s 8.5 percent Islamic notes maturing in 2016. Emaar, Dubai’s second-biggest retail operator, also builds housing and offices.
Share of Income
Emaar reported that 41 percent of revenue and 68 percent of pretax profit came from hospitality properties and leased space including shopping malls in the first nine months of last year. That compares with 24 percent of revenue and 27 percent of profit a year earlier.
“The Dubai Mall is a powerful demonstration of the competencies that Emaar has developed in retail, regarded as one of the core sectors of Dubai’s economy,” Emaar Chairman Mohamed Alabbar said in today’s statement.
Owning the Dubai Mall, with rentable space equivalent to 50 football fields, also helped the company when it used the asset as collateral to refinance 3.6 billion dirhams of debt at a lower price. The expansion announced today will lift the total size of the development to more than 13 million square feet.
Retailers including American Eagle Outfitters Inc., Limited Brands Inc. and luxury watch seller Rivoli Group are opening shops in Dubai as consumer confidence rises. Macy’s Inc., the second-biggest U.S. department-store company, in January 2010 chose the Dubai Mall to open its first Bloomingdale’s store outside its home market.
Left Out
Prospects aren’t as bright for developers that haven’t built up retail assets. Union Properties PJSC, which is mainly focused on homes and offices, this month reported a full-year loss of 1.57 billion dirhams. The company in January handed over ownership of properties including some in Limestone and The Index to settle 1.1 billion dirhams of debt.
Deyaar Development PJSC, partly owned by Dubai Islamic Bank PJSC, has 234 million dirhams of debt coming due this year, compared with about 37.7 million dirhams of profit in 2011. The company had a loss of 2.9 billion dirhams the previous year.
“Even though retail is generally strong, especially at the large malls, we don’t expect many developers to build new ones because funding is tough and there is already a good amount of supply in the market,” Gaffney said. “The areas that will do best are smaller strip malls or supermarkets near housing developments.”
Boost to Economy
Shopping accounted for about 30 percent of Dubai’s gross domestic product last year, Standard Chartered Bank Plc economist Philippe Dauba-Pantanacce estimated. The Dubai Statistics Center said retail and wholesale trade rose by 9.3 percent and hotels and restaurants increased by 4.4 percent in 2010. It hasn’t yet released figures for last year.
Nakheel is in talks with banks to raise at least 300 million dirhams for its first new project since the debt-ridden company received a government bailout in 2009. The Pointe at Palm Jumeirah, across the water from the Atlantis hotel, will include 120 restaurants, 75 shops and landscaped areas for visitors with a view of an offshore fountain.
“The retail sector is strategic for Nakheel,” Chairman Ali Rashed Lootah said at a press conference in January. He added that 60 percent of an extension to Nakheel’s Dragon Mart mall was booked by retailers within a week of its announcement. The company plans to add 1.7 million square feet of retail space and 5,000 parking spaces to the mall.
Fundraising Challenge
Even with a growing retail market, Nakheel may have difficulty raising the money after it received a government bailout and restructured debt, according to analysts including Ahmed Talhaoui, the Abu Dhabi-based head of investment and asset management at Royal Capital PJSC.
“Any issue would have to be at a very competitive yield and probably with a structure that gives some government guarantee,” Talhaoui said in a January interview.
The yield on Nakheel’s 3.8 billion-dirham, 10 percent sukuk maturing in August 2016, fell 114 basis points, or 1.14 percentage points, so far this year to 16.83 percent today, according to data compiled by Bloomberg. That compares with an average yield of 4.45 percent for U.A.E Islamic bonds on Feb. 10, the HSBC/NASDAQ Dubai UAE US Dollar Sukuk Index shows.
Emaar, which opened Burj Khalifa, the world’s tallest tower, in 2010, derived about 23 percent of its 2011 income from retail rents and is now focusing almost exclusively in Dubai on growing sales at its malls, HSBC’s Gaffney said. Tourists visiting the Burj Khalifa’s observation deck can only get there by going through the Dubai Mall.
Emaar’s Head Start
“Emaar was better positioned than others when the financial crisis hit,” said Gaffney. “They had already launched and sold so much in Dubai and didn’t have tons of unsold inventory coming on line. They also were focused on the construction of Burj Khalifa, Emaar Boulevard and Dubai Mall, rather than starting new projects.”
Malls and hotels are the main value drivers for Emaar, whose projects span the Middle East, North Africa and Asia, Ahmed Badr said in a note on Oct. 27, when he was head of Middle East property research at Credit Suisse Group AG. He now works as an equity sales specialist with the bank.
Dubai, the second-largest of seven sheikhdoms that make up the United Arab Emirates, racked up $129 billion in debt transforming itself into a tourist and trade hub. While many developments were canceled, attractions including Burj Khalifa and resort hotels like the Atlantis help bring in visitors who shop for goods that aren’t available in much of the region.
Locals and Foreigners
“The local population is wealthy enough to be able to keep buying and the tourism growth was very strong in Dubai last year,” said David Macadam, head of retail for the Middle East and North Africa at Jones Lang LaSalle Inc. He said Dubai shopping is bolstered by visitors from the Gulf region, Europe, China, the Indian subcontinent and the rest of the Arab world.
Dubai hotels reported an 11 percent increase in visitors in the nine months through September compared with a year earlier, according to the Department of Tourism and Commerce Marketing. Revolutions in Tunisia, Egypt and Libya and armed conflicts in Yemen and Syria mean that tourists in the region have fewer options for vacations.
Buyers spent $114 million in the first week of Dubai’s month-long shopping festival, a 53 percent increase over the year earlier period, according to Karim Beg, Visa Inc.’s head of marketing for the Middle East and North Africa.
“Our marketing efforts have reached new markets in east Asia such as China and Japan and even though this strategy started only three years ago, we have seen its fruit already,” said Laila Suhail, chief executive officer of festival organizer Dubai Events & Promotions.
Little New Space
Dubai has 2.58 million square meters (27.8 million square feet) of mall-based retail space, according to a report by property broker Jones Lang LaSalle. About 173,000 square meters will be completed in the next two years, mostly in small shopping centers or strip malls, it said.
Banks wary of real-estate lending may make an exception if the business case for a project is clear and if adequate protection is put into place, said Raj Madha, an analyst at Rasmala Investment Bank Ltd.
Union Properties sold a building in the Umm Suqeim neighborhood for more than 140 million dirhams to supermarket operator Spinneys, Chairman Khalid Bin Kalban said in June 2010. Such transactions are rare in Dubai, where developers tend to hold onto shopping assets.
Assets to Keep
“It doesn’t make sense for owners to relinquish well- performing assets such as malls, which were great source of cash even during the crisis,” said Matthew Green, head of United Arab Emirates research at real-estate broker CB Richard Ellis Group Inc. “Also, when you look at mall owners they are generally companies that don’t have a pressing need to sell. Even if they wanted to sell, it won’t be prime assets.”
Majid Al Futtaim’s Mall of the Emirates, which contains an indoor ski slope, has a 99.8 percent occupancy rate, while the developer’s Deira City Center and Mirdif City Centre have rates of 98.8 percent and 96.9 percent respectively, according to the company’s prospectus.
Dubai’s mall vacancy rate stands at 20 percent, mainly because of smaller malls with low visitor numbers. Most big international brand retailers won’t open stores in small malls as they look for the most prestigious and high profile locations, Gaffney said.
After the sheikhdom first opened up its real-estate market to foreigners in 2005, developers focused on selling homes as speculation-driven investment drove up prices.
“At the time, it made more sense to sell land and residential units because it was less risky,” HSBC’s Gaffney said. Back then, developers couldn’t determine whether the location would be valuable by the time a shopping center was built, he said.
--Editors: Ross Larsen, Andrew Blackman.
To contact the reporter on this story: Zainab Fattah in Dubai on zfattah@bloomberg.net
To contact the editor responsible for this story: Andrew Blackman at ablackman@bloomberg.net V US <Equity> UPP UH <Equity> DEYAAR UH <Equity> 840705Z UH <Equity> EMAAR UH <Equity>
Go here to read the rest:
Dubai Developers Thrown Retail Lifeline as Home Sales Sink
-
February 14, 2012 by
Mr HomeBuilder
MARLBOROUGH, Mass. and WILMINGTON, Del., Feb. 13, 2012 /PRNewswire/ -- Ashland Specialty Ingredients, a commercial unit of Ashland Inc. (NYSE: ASH - News), has chosen Web Industries, Inc., a global leader in custom manufacturing and development services for flexible materials, to manufacture its Rad-Sure line of blood irradiation indicators. This partnership will allow Ashland to see increased production yields and reduced defect rates over the lifespan of the contract for the blood-supply safety devices.
Ashland's Rad-Sure blood irradiation indicators are used to quickly and clearly verify that blood components have been irradiated to protect patients from contracting transfusion-associated graft-versus-host disease (TA-GVHD). This is a rare, but potentially fatal, complication associated with blood transfusions in which the blood donor's lymphocytes engraft in the recipient. Certain categories of patients – such as those with solid tumors, acquired T-cell deficiencies and bone marrow transplant recipients – are more prone to contracting the disease. Proper irradiation of the blood before transfusion destroys the donor lymphocytes and prevents the immunoreaction that leads to TA-GVHD.
Rad-Sure is a complex, multi-layered laminate device that is affixed to transfusion blood bags. It features a gamma-ray or X-ray sensitive indicator that displays a clear "NOT IRRADIATED" message until exposed to the proper level of radiation. Once exposed, the "NOT" becomes obscured and the visual message reads "IRRADIATED," providing quick, positive visual verification.
To manufacture Rad-Sure, Web Industries' Hartford facility had to develop manufacturing methods to pre-process and combine multiple web-based raw materials into discrete subassemblies and then precisely combine those subassemblies to create the finished medical device. The final assembly process involves in-line lamination, fixed and variable-data printing using either thermal or flexographic processes, and precision die cutting and island placement. Web's manufacturing solution reduces risk with automated inspection and data logging, substantially increases capacity, and improves the yield of high-value input materials.
All assembly takes place on one of Web Industries' modular, programmable manufacturing lines in a medical Class 10,000 clean room environment. An automated vision inspection system capable of measuring tolerances down to +/- .005" and performing optical character recognition to verify the presence and accuracy of lot numbers and language keeps a watchful "eye" on the devices as they move through the process. This monitoring system inspects 100 percent of the critical-to-safety features of Rad-Sure, with real-time data monitoring and automatic detection and segregation of out-of-spec products onto a defect conveyor.
"With a medical device like Rad-Sure, any performance failure can result in serious patient safety concerns," said Dr. Xiang Yu, director, Advanced Materials, Ashland Specialty Ingredients. "Web Industries' manufacturing approach brings an extremely high level of quality assurance at a volume production rate. This combination will enable us to confidently meet the growing demand for these blood safety products and position us for worldwide growth."
"For Web Industries, the Rad-Sure project with Ashland represents a validation of our commitment to advanced flexible material manufacturing and quality assurance systems in the medical device market," said Donnie Romine, president and chief executive officer, Web Industries. "Working with Ashland, we've developed a robust and scalable manufacturing approach by combining medical-class quality with high-speed production and automation."
Web Industries' first shipment of Rad-Sure was delivered to Ashland's distribution center, where it was sent to medical facilities without additional assembly or inspection.
About Ashland Inc.
Ashland Specialty Ingredients is a world leader in specialty additives and functional ingredients that modify the physical properties of aqueous systems for products in key markets including personal care, pharmaceutical, food and beverage, coatings and energy. Using natural, synthetic and semi-synthetic polymers derived from plant and seed extract, cellulose ethers and vinyl pyrrolidones, Ashland Specialty Ingredients offers comprehensive and innovative solutions for today's demanding consumer and industrial applications.
In more than 100 countries, the people of Ashland Inc. (NYSE: ASH - News) provide the specialty chemicals, technologies and insights to help customers create new and improved products for today and sustainable solutions for tomorrow. Our chemistry is at work every day in a wide variety of markets and applications, including architectural coatings, automotive, construction, energy, food and beverage, personal care, pharmaceutical, tissue and towel, and water treatment. Visit http://www.ashland.com to see the innovations we offer through our four commercial units – Ashland Specialty Ingredients, Ashland Water Technologies, Ashland Performance Materials and Ashland Consumer Markets.
About Web Industries
For over 40 years, Web Industries has been a leader in providing contract manufacturing and development services for products involving flexible materials, including slitting, spooling, printing, laminating, specialty extrusion, assembly, packaging, and complete supply chain management. An employee-owned company, Web Industries has a long history of applying expertise, innovative thinking and creative problem solving to speed time to market and drive costs down in order to ensure our customers' product success.
™ Trademark, Ashland or its subsidiaries, registered in various countries
View post:
Ashland Chooses Web Industries to Manufacture Rad-Sure™ Blood Irradiation Indicators
-
February 14, 2012 by
Mr HomeBuilder
NEW YORK, Feb. 13, 2012 /PRNewswire/ -- Stuart Dean, a renowned provider of architectural restoration services throughout the United States, will present its full line of interior and exterior restaurant solutions at the March 4-6, 2012 Restaurant Facility Management Association (RFMA) 2012 Annual Conference, including metal polishing, stone cleaning and sealing, wood refinishing, glass restoration, and commercial-grade grout installation. The conference is at The Mirage Hotel & Casino in Las Vegas with attendees to include facility directors, managers, project coordinators, owners/operators, construction managers, and operations and purchasing managers. Stuart Dean will be at Booth #311.
(Logo: http://photos.prnewswire.com/prnh/20120213/NE52388LOGO )
"Many restaurant facilities feature fine architectural and commercial-grade materials in high-traffic areas, which creates the need for skilled restoration services," said Mark Parrish, president and CEO of Stuart Dean. "Our services are designed to reduce restaurants' annual aesthetic maintenance in order to maintain curb appeal and enhance profitability."
Stuart Dean's standardized operating procedures and national footprint enable the company to provide consistent, scheduled rollouts across multiple locations for chain restaurants. The company's vast experience gained during nearly 80 years in business enables Stuart Dean to provide unique solutions to costly maintenance challenges, including cost-effective restoration programs that are custom-designed by the most skilled, knowledgeable and safety-conscious technicians in the industry.
The company's exclusive Marcoat® Epoxy Grout Floor System is an innovative solution for grout degradation, one of the most common and costly back-of-the-house problems for the restaurant industry. Marcoat is a nonporous epoxy replacement for conventional grout and eliminates corrosion for the long term by standing up to the rigors of daily wear and tear in commercial kitchens. The material features industry-leading return on investment, with a total cost of ownership four times less than conventional grout.
RFMA is a professional organization dedicated to advancing industry awareness of restaurant facility management, and promoting professional and ethical standards to serve customers with added value. Drawing restaurateurs from across the country, the RFMA Annual Conference spotlights the latest technological advances in the restaurant facilities' industry. With more than 230 exhibitors displaying products and services, renowned speakers and breakout sessions, the RFMA conference has established itself as the leader in assimilating new information on restaurant facility maintenance.
About Stuart Dean
Stuart Dean is the country's preeminent architectural restoration company, specializing in metal polishing, stone cleaning and sealing, wood refinishing, glass restoration, and commercial-grade grout installation. Thousands of clients entrust Stuart Dean to protect, maintain and restore their buildings, retail stores, institutions and restaurants every day. Stuart Dean offers a portfolio of services to enhance the beauty and retain the value of a wide array of architectural assets. The company has been in business for nearly 80 years, with 22 offices in the U.S. and Canada and over 450 employees. Major markets served include New York, Boston, Philadelphia, Pittsburgh, D.C./Virginia, Phoenix, Charlotte, Miami, Atlanta, Cleveland, Chicago, St. Louis, Houston, Dallas, San Francisco, Seattle, Los Angeles, Tustin, San Diego, and Toronto. For more information, visit http://www.stuartdean.com.
Contact: Jeff Donaldson
For Stuart Dean
412-642-7700
jeff.donaldson@elias-savion.com
View original post here:
Stuart Dean Presents Specialized Architectural Restoration Services to Restaurant Industry at RFMA 2012 Conference
Category
Commercial Architectural Services | Comments Off on Stuart Dean Presents Specialized Architectural Restoration Services to Restaurant Industry at RFMA 2012 Conference
-
February 14, 2012 by
Mr HomeBuilder
MARIETTA, GA (CBS ATLANTA) -
Members of a Marietta Brazilian church held a going home ceremony for five members killed in a crash along I-75 in late January. A total of 11 people died in that accident.
Five hearses and five caskets arrived one-by-one at the First United Methodist Church of Marietta. The larger church hosted friends and family to say goodbye to members of the International Church of the Restoration.
"It's very hard for everybody," said friend Rinaludo Rodriguez.
Jose Carmo was a pastor at the church. He, his wife Adriana, and daughter Leticia died in the crash in Gainesville. Jose's brother Edson and his girlfriend Rose were also killed.
They were riding in a van on their way back home from a church conference in Orlando, FL when they crashed. Poor visibility because of smoke and fog played a major role in the crash.
"He was a faith guy, from a faith family. I wanted to pay my respect for a good man," said Rodriguez.
Several of Leticia's classmates from Sprayberry high school came to pay their respects.
"She sat in my lunch and she was really sweet and nice. It just doesn't seem real that something like that would happen to her," said Jeremy Bernal.
Leticia's younger sister, Lidiane is the only survivor from the van. She's still in an Orlando hospital, unable to attend the service for her family.
While friends say goodbye to too many members of their congregation, they are still praying for strength for Lidiane.
"I just pray. It's the only thing you can do is just pray and God will take care of the rest," said Rodriguez.
The bodies will be flown to Brazil on Tuesday. The family will be buried on Wednesday.
Copyright 2012 WGCL-TV (Meredith Corporation). All rights reserved.
See the original post here:
Going home ceremony held for five members of Marietta church
Category
Home Restoration | Comments Off on Going home ceremony held for five members of Marietta church
-
February 14, 2012 by
Mr HomeBuilder
On what would have been his 80th birthday, Feb. 26, the legendary Johnny Cash will be honored with the official ground breaking ceremony of the Johnny Cash Boyhood Home Project in Dyess at 2 p.m.
The Cash home is one of the few houses still remaining in Dyess. The restoration of Cash's childhood home began in January and is expected to be finished in June of 2013.
There is a lot of work that needs to be done before we can actually open the home up to the public," Ruth Hawkins said, director of the Arkansas Heritage Sites.
With the unpredictable weather and conditions of the gumbo soil, the ceremony will be in the Dyess Community Center, but there is an opportunity to drive past the Cash home and see the progress of the restoration.
During the ceremony the Cash family will make tributes, performances from the family; along with the status of the restoration.
The funding for the project came from the very first Johnny Cash Music Festival held last year at the Convocation Center.
"We raised $300,000 from the festival, part of the money is going to scholarships in Johnny Cash's name for students from that area, as well as money towards the restoration," Hawkins said.
As part of President Franklin D. Roosevelt's New Deal program in 1934, the town was originally built as an Agricultural Cooperative Project.
The main purpose of the town's administration was to give poor families a chance to start over. The Cash family was one of 500 families to receive this chance, moving to Dyess in 1935.
The current status of the project is stripping away the paint of the walls inside.
"When the Cash family lived there, it had wood panelling that was milled on site in Dyess," Hawkins said.
With the help of photos and memories of relatives
of the Cash Family, Hawkins and her team have been able to make this restoration possible. When all is said and done the home will be an exact replica of the time when the Cash children lived there.
His family's economic and personal struggles during the Great Depression was the inspiration of many of his song fans know and love today. The project will not only be a tribute to 'The Man in Black,' but a reflection and illustration of what life was like during the Great Depression.
The Arkansas Heritage Site is not only working on the restoration of the Cash home, but also have acquired the town theater and the administration building.
"After the completion of the theater it will be used as an orientation center for visitors, where there will be Johnny Cash films along with documentaries from the 1930s," Hawkins said.
The exterior of the administration building has been completed. Once the interior has been completed, half of the building will be leased out to the city hall. The other half will be a museum dedicated to the city of Dyess and the impact Dyess made on Johnny Cash's life.
"The overall vision for this project is to create a museum complex that tells the story of Dyess and Johnny Cash," Hawkins said.
Read more from the original source:
Cash Home Project to hold ground breaking ceremony on Cash's birthday
Category
Home Restoration | Comments Off on Cash Home Project to hold ground breaking ceremony on Cash's birthday
« old Postsnew Posts »