Home Builder Developer - Interior Renovation and Design

Submitted by theCity of Bellingham, written by Janice Keller

Next steps are underway for use of the former site of the Bellingham Public Market as an emergency shelter facility after Bellingham City Council approval at a special meeting June 16.

The new location will allow adequate social distancing to help prevent the spread of COVID-19. Council action to approve lease terms was taken after approval from Mayor Seth Fleetwood consistent with Executive Order 2020-02 and Emergency Ordinance 2020-03-008.

The City of Bellingham, in partnership with ??Whatcom County and Lighthouse Mission Ministries, will be relocating the Drop-In Center low-barrier emergency shelter facility from its current location at Bellingham High School to the new location. The Drop-in Center will remain at its new site for up to four years.

Steps now underway include construction in and around the building to prepare it for use as a shelter. Additionally, a permitting process under the Citys temporary shelter code has been initiated.

Lighthouse Mission Ministries has applied for a permit under the Citys temporary shelter code (BMC 20.15.030) to continue use of the building if the declared emergency ends prior to their lease with the City. Planning and Community Developmentissued a notice of application onJune 19, 2020,which starts a 14-day public comment period. Due to the Independence Day holiday, the comment period has been extended to July 6. An informational meeting about the project is scheduled via webinar on 5:00-6:30 p.m.Wednesday,June 24, 2020.Members of the public are encouraged to participate, with meeting sign-on details availablein the notice of application.

In addition to making sure the necessary permit is in place when the emergency declaration ends, public feedback during the permit process will help inform what conditions the City will require of Lighthouse Mission Ministries while they occupy the building downtown.

Washington State, Whatcom County and the City of Bellingham have all established health emergencies in response to the COVID-19 pandemic. During this time, measures to ensure that community members are safe can be implemented immediately.

The Mayor and Bellingham City Council approved the use of and lease terms for the building consistent with the emergency requirements after determining that the usual approval process would cause undue delay and put Drop-In Center guests, staff and the public at risk.

The Drop-in Center may remain in thebuilding for the duration of the declared emergency, which at this time is unknown.

To stay in this location beyond the public health emergency, Lighthouse Mission Ministries must have a permit under the Citys temporary shelter code (BMC 20.15.030). The process to obtain this permit includes public input opportunity and an option to appeal, just like any other temporary encampment permit application.

The Lighthouse Mission, City and County engineering and facilities staff, the property owner and local contractors worked quickly to identify improvements needed to support daily operations of the Drop-In Center.

Improvements underway include shower facilities, handwashing stations, laundry facilities, interior walls, cabinets and counters, food service, painting, heating and cooling equipment and exterior courtyard fencing. Prime contractors Colacurcio Brother Construction, Andgar HVAC and Carlson Steel Works developed and executed contracts, mobilized personnel and equipment, secured permits and scheduled work with the City in less than seven days.

These primecontractors and several other local subcontractors, including Blythe Plumbing and Scott Electric, are now preparing toor alreadyworking on site, with work scheduled to be completed by July 15, 2020.

We are very appreciative of the efforts shown by these contractors in recognizing the need and urgency with this unique project moving forward on a very aggressive schedule, said Eric Johnston, Public Works director.??

The Drop-In Center has beentemporarily housed at Bellingham High School.

As described to the City Council on June 16, the Drop-In Center is expected to vacate Bellingham High School by mid-July, to give the district ample time to prepare Bellingham High School for school to start in the fall.

The Drop-In Centercannot return to its location in Old Town because those facilities are too small to provide adequate social distancing while COVID-19 remains a threat.

Lighthouse Mission Ministries plans to build a permanent shelter on an existing property in Old Town while the operation is temporarily housed elsewhere, Lighthouse Mission Ministries Director Hans Erchinger-Davis said.

Bellingham Mayor Seth Fleetwood said the Bellingham Public Market location best meets the identified needs. It is large enough, it is the most cost-effective option, it meets our very urgent timeframe, we have a property owner who is willing to work with local officials, and the site lends itself best to amenities that will help ease neighborhood concerns.

We recognize there are strong opinions on the impacts, perceived and real, this will have on adjacent businesses, Mayor Fleetwood said. We are committed to helping navigate those issues to ensure negative impacts are minimized.

We simply have no choice. We must create healthy living space for people experiencing homelessness during this public health emergency, or they will have no option other than to live unsheltered, Mayor Fleetwood said. Protecting the health of people who need shelter services greatly reduces the risk of a COVID-19 outbreak among shelter guests, among staff and volunteers, and throughout the whole community.

The Whatcom County Council and Bellingham City Council approved a cost-sharing agreement for a new temporary shelter location at their respective June 2 and June 8 meetings.

The agencies involved anticipate the next location to be in use for up to four years while Lighthouse Mission Ministries rebuilds at its current location in Bellinghams Old Town.

Any facility selected for temporary use must provide enough space to allow guests to sleep with a minimum of six feet between them, said Erika Lautenbach, Director of the Whatcom County Health Department.

Its critically important that as a community we do everything we can to prevent the spread of COVID-19, especially for people who are more vulnerable to this virus, Lautenbach said. For our neighbors experiencing homelessness, we need a shelter with enough space for physical distancing that will limit the chances of the virus spreading. Protecting those who use the shelter from an outbreak of COVID-19 also protects the health of our entire community.

Link:
Construction Begins, Permit Process Initiated, for COVID-19 Emergency Shelter Use of Downtown Property - whatcomtalk.com

Trusted Business Insights answers what are the scenarios for growth and recovery and whether there will be any lasting structural impact from the unfolding crisis for the Traffic Road Marking Coatings market.

Trusted Business Insights presents an updated and Latest Study on Traffic Road Marking Coatings Market 2019-2026. The report contains market predictions related to market size, revenue, production, CAGR, Consumption, gross margin, price, and other substantial factors. While emphasizing the key driving and restraining forces for this market, the report also offers a complete study of the future trends and developments of the market.The report further elaborates on the micro and macroeconomic aspects including the socio-political landscape that is anticipated to shape the demand of the Traffic Road Marking Coatings market during the forecast period (2019-2029).It also examines the role of the leading market players involved in the industry including their corporate overview, financial summary, and SWOT analysis.

Get Sample Copy of this Report @ Traffic Road Marking Coatings Market Size, Market Research and Industry Forecast Report, 2020-2027 (Includes Business Impact of COVID-19)

Industry Insights, Market Size, CAGR, High-Level Analysis: Traffic Road Marking Coatings Market

The global traffic road marking coatings market size was valued at USD 4.5 billion in 2019 and is projected to register a CAGR of 6.0% from 2020 to 2027. Increased spending on infrastructural development for constructing new highways and focus on repair and maintenance operations are expected to be the key driving factors for the global market. The industry is not only associated with new road construction activities but also with existing maintenance businesses, which drives the demand for repainting.

The market has witnessed increasing investments in intelligent street marking systems and machines that help record the drivers speed, driving conditions, and temperature while communicating it to the vehicles sensor system. Paint is widely used for travel lane, loading zone, and parking space markings. Thermoplastic coating, also known as hot melt marking, is gaining advantage owing to its properties such as longevity and retro-reflectivity.Preformed polymer tape is a cold-applied plastic sheet used for marking traffic lanes, crosswalks, and stop bars. Epoxy coating is a reliable and economical solution which consists of a pigmented resin base and a catalyst and is suitable for heavy-wheeled traffic. This coating is preferred over plastic material coatings since it is resistant to oil, gasoline, and transmission fluid and is cost-effective as well. Moreover, manufacturers are coming up with initiatives to develop temperature-sensitive paints, which can withstand adverse environmental conditions, such as snowfall and heavy rains.Rising demand for traffic road marking coatings for public and private parking spaces is expected to boost the market growth. Regulatory bodies across the globe are continually formulating guidelines to improve road safety. While a well-established regulatory structure is already present in developed regions, such as North America and Europe, emerging economies are still working toward enhancing the framework to ensure road safety and maintenance.

Product Insights of Traffic Road Marking Coatings Market

Thermoplastic coating is projected to emerge as the fastest-growing product segment over the forecast period. Conventional paint is ideal for markings on private spaces and public streets. These paints are available in different colors, each symbolizing a different function. For instance, red markings display crucial information, while colors such as yellow and orange generally symbolize temporary cautions. Reflectors are used in areas frequented by fork-lift traffic to prevent accidents.Thermoplastic marking coatings are applied in a thick/built up layer to create rumble strips. This coating sets quickly and adheres firmly to the surface. Extra additives can be added to the coating to retain its color over time, thus improving its reflective capabilities. High strength and resistance make this coating wear-resistant.Preformed polymer tape coatings, also referred to as tape or cold plastic, are placed either over the surface of the pavement or the asphalt concrete during the hardening process. Along with its use for crosswalks and stop bars, it is also supplied in sheets from which unique shapes, forms, or letters can be designed.

Type Insights of Traffic Road Marking Coatings Market

On the basis of type, the traffic road marking coatings market is segmented into permanent and removable traffic road marking coatings. Permanent traffic road marking coatings include pavement tapes and paints. Aerosol permanent paints are widely used for traffic line marking. They exhibit an extremely high percentage of solid and resin content, which contributes to exterior durability along with water, weather, and abrasion resistance. Aerosol paints are available in a variety of colors, but white and yellow are generally preferred in several applications including crosswalks, streets, highways, airport runways, and parking lots. These paints have a longer life compared to conventional paints.Removable traffic road marking coatings are primarily used for painting signs, identification numbers, and direction arrows for warehouse floors, road construction zones, and synthetic turf fields, among others. These paints are tough and durable; however, they can be easily removed and eventually wear off when exposed to the environment.

Application Insights of Traffic Road Marking Coatings Market

Road marking lines emerged as the largest application segment with a market share of 55.4% in terms of revenue in 2019. Road marking lines are frequently used to guide the vehicles on the road. The marking indicates the delineation of traffic path and lateral clearance from traffic hazard for safe and smooth movement on the road. It also serves as a tool for providing information, controlling traffic, and warning road users.

Road marking labels is projected to emerge as the fastest-growing application segment owing to its wide application for roads, public highways, and on-site applications. Traffic road marking labels are used to promote traffic safety, notify drivers of the speed limit, and provide directions and other useful information to all road users including pedestrians and cyclists. Basic road labeling includes regulatory warnings, roadwork signs, and informational signs. All road marking labels must comply with the road traffic regulations.

Regional Insights of Traffic Road Marking Coatings Market

Europe emerged as the largest market in 2019, while Asia Pacific is projected to witness the highest growth over the forecast period. The European Union Road Federation is actively researching to develop standard recommendations to reach its goal of reducing highway fatalities. Usage of high-quality building materials, safety measures, training, and better surveillance on contractors are expected to drive the product demand in the coming years.The U.S. government has rolled out initiatives to enhance road infrastructure and encourage the development of durable, high-performance coating products with enhanced visibility and skid resistance. Facilitating vertical market integration by launching manufacturing units for motorway marking and traffic paints would provide contractors and applicators with a chance to acquire better control over the cost and quality of products. This is expected to support the regional market growth over the forecast period.

Market Share Insights of Traffic Road Marking Coatings Market

Manufacturers focus on developing innovative products, such as temperature-sensitive, long-lasting, reflective paints. The market is characterized by a high degree of forward integration, which would help manufacturers enhance their position in the global market. Key players operating in the market include AutoMark Technologies (India) Pvt. Ltd.; Sherwin-Williams Company; Geveko Markings; Ennis Flint, Inc.; Crown Techno; Dow Inc.; 3M Company; and Swarco.

Segmentations, Sub Segmentations, CAGR, & High-Level Analysis overview of Traffic Road Marking Coatings Market Research Report:This report forecasts volume and revenue growth at global, regional, and country levels, and provides an analysis of latest industry trends in each of the sub-segments from 2019 to 2030. For the purpose of this study, this market research report has segmented the global traffic road marking coatings market report on the basis of product, type, application, and region:

Product Outlook (Volume, Kilotons; Revenue, USD Million, 2019 2030)

Paint

Thermoplastic

Preformed Polymer Tape

Epoxy

Type Outlook (Volume, Kilotons; Revenue, USD Million, 2019 2030)

Permanent

Removable

Application Outlook (Volume, Kilotons; Revenue, USD Million, 2019 2030)

Road Marking Lines

Road Marking Labels

Quick Read Table of Contents of this Report @ Traffic Road Marking Coatings Market Size, Market Research and Industry Forecast Report, 2020-2027 (Includes Business Impact of COVID-19)

Trusted Business InsightsShelly ArnoldMedia & Marketing ExecutiveEmail Me For Any ClarificationsConnect on LinkedInClick to follow Trusted Business Insights LinkedIn for Market Data and Updates.US: +1 646 568 9797UK: +44 330 808 0580

Link:
Traffic Road Marking Coatings Market Break Down By Leading Companies, Countries, Applications, Challenges, Opportunities And Forecast 2020-2026 -...

Dallas Flooring Warehouse in Grapevine Texas has announced that they are offering carpet installation services in Grapevine and nearby areas. They also want people to know that all of their stores are open and are following normal operating hours. Their new SH / Dallas Flooring Warehouse store can be found in the Grapevine Town Center. They offers various kinds of carpets, including private label carpets. They want homeowners and other property owners to know that they have millions of dollars worth of inventory and that they have every major brand of carpeting, including Mohawk, Shaw, Abbey, and more, with all of them available at reduced prices.

Johnny Carpet, a spokesperson for Dallas Flooring Warehouse in Grapevine, says, Our massive volume buying power enables us to deliver carpeting at prices competitors can only dream of and we pass those savings directly to you, the Dallas wholesale carpeting customer! Come and visit our warehouse and see our massive on-site inventory. Call now for more info. You dont have to deal with strip mall sellers or shady Craigslist sellers to get a great deal. We have genuine quality carpet at extreme discounts and we can install it next day to your home or business in Dallas Fort Worth TX.

Dallas Flooring Warehouse in Grapevine Texas offers various brands of carpets. These include the Boundless Trackless Textured Saxony Carpeting, Majestic Touch Frieze Carpet, Contempo Level Loop Berber, Paradise Dream Frieze Carpeting, Celebrity Trackless Textured Saxony Carpeting, Royal Beauty Frieze Carpeting, Grand Royale Luxury Heavyweight Frieze Carpeting, Posh Block Berber Carpet, Timeless Beauty Ultra-Soft 45oz Carpet, Uptown Heavyweight Trackless Plush Carpeting, Cozy Elegance Jewel Tone Frieze Carpeting, Elite Luxury Ultimate Luxury Speckled Heavyweight Frieze Carpet, Olympus Ultra Heavyweight 100 oz Ultra-Soft Carpeting, and CuddleSweet Super Soft Carpeting.

For those who prefer carpet tiles, Dallas Flooring Warehouse in Grapevine Texas also provides them. Carpet tiles offer a flooring solution with may applications for homes, apartments, and commercial and office spaces. Carpet tiles or carpet squares offer a number of advantages, such as quick and easy installation, possible DIY installation, and if one carpet tile gets damaged, it is easy to have it replaced, as compared to roll carpeting.

Dallas Flooring Warehouse in Grapevine Texas also offers other kinds of flooring. One is hardwood flooring. These include the 7 Wide Hickory Hardwood Flooring, Premium Hand Scraped Hickory Hardwood Flooring, Custom Solid Hardwood Nail-Down Finish in Place Hardwood Floors, Hand Scraped Solid Nail-Down Custom Hardwood Floors, Multi-Width Engineered Hickory Hardwood Flooring, Hand Scraped Hickory Hardwood, Birch Hardwood Flooring, Elm Hardwood Flooring, Hill Country Engineered Hardwood, Decor Flooring Engineered Hardwood, LM Flooring Engineered Hardwood, Mohawk Waterproof Wood, and Crescent Engineered Hardwood.

Also available from Dallas Flooring Warehouse in Grapevine Texas are various tiles. These include the Durabody Marble Tile by Interceramic, Durabody Travertine Tile, Durabody Vein Cut Stone Tile, Premium Durabody Wood Look Tile, Durabody Slate Tile, Durabody Quartzite Tile, Durabody Concrete Tile, and Wall Tiles.

Wood laminate flooring are also available. These include the Universal Laminate Flooring, Decor AC3 Laminate, and Knoa AC3 Handscraped Wood Laminate.

Luxury vinyl plank flooring are also available. These include the COREtec SPC Luxury 100% Waterproof Wood Look Luxury Vinyl Plank, Pergo Extreme Wood, Tile, and Stone Look Waterproof / Dentproof Luxury Vinyl Flooring, Oak Wood Look Vinyl Plank Flooring, Hand Scraped Vinyl Plank Flooring, Worlds Fair Barcelona 12 mill Commercial Grade Luxury Vinyl Planks, Lyndon Luxury Vinyl Flooring, Waterproof 12 Mil Click Lock Luxury Vinyl Plank, Timeless Charm Glueless Waterproof Click-Lock Vinyl Plank, Waterproof Six-Plus WPC Wood Plastic Composite Floors, SPC Flooring Stone Polymer Composite Stunning Wood-Look, Rigid Core Premium Waterproof SPC Flooring, and Waterproof Wood Vinyl Plank with Premium Underlayment.

https://www.youtube.com/watch?v=UBpSpA3KVBs

When looking for services for carpet Grapevine residents can check out the Dallas Flooring Warehouse website, or contact them on the telephone, or through email. They are open from 10:00 am to 6:00 pm, from Monday to Friday, and from 10:00 am to 5:00 pm on Saturdays.

###

For more information about Dallas Flooring Warehouse - Grapevine, Texas, contact the company here:

Dallas Flooring Warehouse - Grapevine, TexasJohnny Carpet(817) 416-9888grapevine@dallasflooringwarehouse.com1217 TX-114 #118Grapevine, TX 76051

Go here to see the original:
Carpet Installation Services Offered by Dallas Flooring Warehouse in Grapevine Texas - Press Release - Digital Journal

Yuma School District-1s $32 million renovation/expansion project continues to move forward incrementally.An update was given during the Yuma-1 Board of Educations regular monthly meeting, Monday night at district headquarters in downtown Yuma.David Kurz of Neenan Archistruction participated via telephone, while Chad Rayl of owners representative Project One was in attendance, along with Superintendent Dianna Chrisman, and all the board members Kim Langley, Lindsey Galles, Duane Brown, Thomas Holtorf and Dan Ross.Kurz told the board the Yuma Middle School junior high wing, which is undergoing updates for items such as HVAC, new and more windows, and carpet, is scheduled to be turned over to the district by August 28, giving the teachers a tight timeframe in which to get their classrooms in order prior to the start of school the next week.However, as of now, the remodeling work of the YMS service kitchen, will linger on after school starts, with an expected turnover date of September 23.Ross later asked why that was the case, since he thought the kitchen work was ahead of schedule. He was told the later date has been part of the plans recently as COVID-19 restrictions have slowed down the overall process. He also was told that is the worst-case scenario, and eventually that timeline can be sped up. If not, the district has contingency plans in place, and Chrisman noted the district food service has a lot of experience now with preparing grab-and-go meals, following handing out free breakfast and lunches while school was shut down the last two months of the 2019-20 school year.Per the YMS portion, it was noted holes are being punched out of the walls in the junior high wing where windows will be installed.It was noted that mold had to be remediated in five the junior high classrooms as things were torn up, but the work has been done and tests sent to the proper authorities to make sure the mold is completely removed.Over at Yuma High School, the compacting and the subgrade for the concrete pad for the auxiliary gym on the south end of the high school is nearing completion. Next up is digging out for the foundation. Work also is being done for a new boiler and utilities. The utilities under the current gravel parking lot on the west side are being moved so they are out of the way of the new wing that will include the main entrance, along with science and Career Technical Education classrooms, which includes the new ag education building at the far west end of the new wing.Kurz shared floor plan drawings, along with exciting artists renditions of the new main entrance area. He also shared a rendering of a science room. Another one shared showed the current main hallway, which runs south from the restrooms at the west side of the school, highlighting breakout spaces and pods, which allow for open gatherings down the hallway while providing access to the math, social studies and language arts classrooms. Another drawing showed the senior locker room area between the remodeled classroom wing and the wing to the east that houses music and art.Drawings will be available for viewing eventually on the YSD-1 project Facebook page, which the Pioneer will share on its Facebook page. The visuals are very enticing.Improvements with the auditorium were not part of the original plan, but updating the HVAC for the auditorium was at the top of the districts wish list, so Neenan has been looking at ways to getting into the project.The board was told Neenan has $152,000 in credits it could go toward that work. Three options had been presented, including one that involved a complete new unit that also would entail structural work, such as new steel, that would cost about $20,000 above the $152,000. A third option would be rebuilding the existing HVAC without the need for structural work, with the cost coming in under the $152,000, at around $118,000. The first option would require the district making a decision right now, while the other would not require an immediate commitment.The board later approved a motion going with the rebuilding option with the key wording of if the budget allows. A rebuilt HVAC at least would result in a more efficient unit for the auditorium than it has now.In a related project action, the board approved installing new carpeting in the grades 5-6 wing at YMS, along with along with the hallway that goes to the main office area, and the main office are, for a cost of $38,000, so it can flow better with the upgrades in the junior high wing. Initially, the district had budgeted $125,000 for the carpet and new paint in those areas.However, Chrisman reported Monday night it turns out that was a huge overestimate. The vote was 4-1 go ahead with the new carpet, with the understanding paint would be addressed later, but obviously well under the initial estimate. Holtorf cast the dissenting vote, after earlier in the meeting noting the district needed to show it was being as fiscally responsible as possible after benefitting from taxpayers approving the bond issue for nearly $16 million in the renovation/expansion project.In one final project update, Kurz of Neenan said the hope is to have a Gross Maximum Payment (GMP) for the new wing at YHS in place by September 1. He said Neenan has submitted permits for that phase of the project, and is working closely with subcontractors in finalizing concrete numbers. He told the board that at this point, the hope is a special board meeting will be held August 31 to set the final GMP.

Follow this link:
Yuma-1 project moving ahead incrementally Yuma Pioneer - YumaPioneer

GORGEOUS hickory hardwood floors, Marble Floors, custom crown molding, energy efficient LED lighting, & SO MUCH MORE! Magnificent 1.5 story 4 BR, 5 Bath home. Great room w/floor to ceiling arched windows, gas fireplace, & wet bar. Completely Renovated Chefs kitchen! New Sub Zero,Wolf, Dacor & Bosch Appliances, center island, breakfast bar, granite counters, butlers pantry & walk-in pantry; Vaulted hearth room w/3rd fireplace. Stunning main floor Master Suite; 2 walk-in closets w/custom organizers, spa-like bath w/marble flooring, whirlpool & Custom walk-in shower! 2 spacious bedrooms upstairs w/Jack & Jill Bath. Loft/Sitting area. Finished walk-out LL continues to captivate w/4th Bedroom Suite, Full Bath w/custom walk-In Shower, spacious rec room, media room w/THX surround sound, 4th fireplace, wet bar, workout room w/ indoor batting cage. Enjoy the sunset entertaining in your private backyard Pool oasis. Lush landscaping,spacious level yard including elevated patio w/waterfall.

View Listing

See the article here:
Big Homes Just Listed in the St. Louis Area - Buffalo News

FRANK CHURCH-RIVER OF NO RETURN WILDERNESS It feels as if the carpet should be a thick pile of shag.

It isnt, but the interior of this Cessna 206 is certainly attempting to catch the vibe of a 1973 Volkswagen Bus interior, down to the cream and brown coloring and hints of orange.

The reason this Cessna is even part of a story about earthquakes is because planes like the one owned by the Idaho Transportation Departments Division of Aeronautics are the most reliable way to get into the remote areas where seismologists and geophysicists like to place their high-sensitivity and expensive monitoring equipment.

Story continues below video

Their latest project is learning more about the 6.5-magnitude earthquake that hit near Stanley in March, leaving a long-lasting trail of effects.

Claudio Berti, an Italian geodynamicist and director of the Idaho Geological Survey, and Tim Steffen, the Division of Aeronautics safety and education coordinator and ex-fighter pilot, are well-versed in flying into backcountry airstrips in Idahos mountainous central region to pick up data from seismometer stations that are helping to map the fault which caused Marchs earthquake and more recent aftershocks.

Idaho Geological Survey is a state agency hosted by the University of Idaho as a program in the universitys Office of Research and Economic Development. Berti is in charge of gathering seismic data throughout the state. And since the large March 31 earthquake, he has been flying out to backcountry airstrips so seismologists across Idaho and the United States can study the aftereffects of the big shake.

On Monday, Berti brought an Idaho Press reporter along as he ran through diagnostics on two seismometers at the Upper Loon and Thomas Creek airstrips north of Stanley, just miles from the quakes epicenter. Since Idaho has no permanent seismic monitoring system, the devices Berti visits by plane monthly are jerry-rigged in blue Rubbermaid storage boxes and locked to fences and trees. Boise State University geophysicists installed the devices soon after the quake, along with earthquake monitoring equipment around Boise.

Seismic energy from an earthquake has a very unique fingerprint, Berti said as he pulled data from the seismometers onboard memory device. Some signals are much larger than others like you see in a large earthquake, but small earthquakes show up in shocks often.

Seismometers are a geophysics monitoring tool that determine how much the ground is moving, and in some cases they have been paired with geophones which measure how fast the ground is shaking and infrasound microphones, which measure the sound aftershocks send into the atmosphere.

The earths movement crackles, moves, breaks for months or years after a big earthquake, Berti said. So all the little earthquakes, the cracks, the earth healing, it illuminates the fault, and by locating the fault we can determine the dimensions.

With such a strong earthquake, aftershocks will continue for a significant period of time, potentially longer than a year, which is why many of the seismometers and other seismic-listening equipment will be deployed in the area around Stanley for the coming months.

Part of Bertis job is to check to make sure the seismometer is still working and ensure the data is gathered correctly. To ensure the vibration monitoring device is functioning, Berti jumps up and lands hard on the ground next to the seismometer, to look for his signature on the equipments readout, which shows up as a lopsided W.

The information gathered from these seismometers will be uploaded into a national database that other seismologists and geologists will study in the future, and will hopefully collect enough data to get a true profile of the fault that caused Marchs earthquake. Which means the Cessna 206 is going to continue to get a workout and the interior decor will be open to the stunning sights of central Idaho for some time to come.

Read more:
Backcountry seismic activity sends scientists out in the wild near Stanley - Idaho State Journal

Own a piece of history with this gorgeous home featured in the book, Taverns of Cumberland County. When used as a tavern in the early 1800~s, ~Sign of the Unicorn~ was a welcome stop for weary travelers. The home has been renovated for comfort while being respectful of its history. When entering the home, you cross a large stone threshold and step into a huge center hall foyer. The first floor features a renovated chef~s kitchen, laundry room, full bath, large dining room, family room, living room, and ~tavern~ room. On the second floor, you will find 5 bedrooms and 3 baths. The master suite (590 sq. ft.) is pure bliss with a large dressing area, a walk-in closet and master bath. The attached 3 car garage features a shop and bonus room. Your family will love the wonderful outdoor space which includes a 20~X40~ heated saltwater pool, koi pond with relaxing waterfall, large wooden deck overlooking the pool, detached shed, a delightful playset for the young ones, and lots of grassy areas. The historic 3 story barn (currently rented by a local farmer) is ready for your renovation. Located in Silver Spring Township (Cumberland Valley School District), it is a short 4-mile drive to either Carlisle or Mechanicsburg.

View Listing

Read the original here:
Big Homes Just Listed in the Carlisle Area - Quad-Cities Online

It was a stunning display that capped off a head spinning four months at the Department of Justice. Sitting before the House Judiciary Committee on Wednesday, two current federal prosecutors, Aaron Zelinsky and John Elias, claimed under oath that on Attorney General William Barrs watch the department had effectively become a tool to advance the political and personal interests of Donald Trump and his administration. Its remarkable for a sitting career assistant U.S. attorney not only to assess that their work has been politically corrupted and that they must withdraw from a case or even resign from the department, David Laufman, a former Justice Department official, told me. But to take the extraordinary step of serving as a whistleblower and provide testimony to Congress about the wrong doing theyre seeing at the Justice Department.

Under oath, Zelinsky described a pressure campaign from the highest levels of the DOJ to curtail the sentencing recommendation for Roger Stone, a veteran of the Trump administration and longtime ally of the president who was convicted of lying to Congress and witness tampering. In the United States of America, we do not prosecute people based on politics, and we dont cut them a break based on politics, Zelinsky, who worked on Special Prosecutor Robert Muellers team and is currently serving as an assistant U.S. attorney in Maryland, told the committee. But that wasnt what happened here. Roger Stone was treated differently because of politics.

Elias struck a similar theme, testifying that Barrs personal biases influenced antitrust investigations. Specifically, Elias alleged an abuse of power in probes into the marijuana industry and an agreement between the state of California and four automakers at the behest of the attorney general. Personal dislike of an industry is not a valid basis upon which to ground an antitrust investigation, Elias asserted.

The testimony of Elias and Zelinsky had the effect of completing the legal portrait of Barra person for whom there is no essential difference between belief in a strong executive and personally serving Donald Trump. Its breathtaking in its completeness. Theres no bulwark against corruptionseemingly in Barrs theory, the executive branch, of which the Department of Justice is a part, can take what it wants.

When Trump tapped Barr to lead the Justice Department, the pick drew praise from some, though he was viewed with skepticism from others. Having previously served as attorney general under George W. Bush, Barr was painted as an institutionalist who would hold his ground against Trump and restore the reputation of the department, tarnished under his predecessor Jeff Sessions. While there was widespread acknowledgment that Barr held an expansive view of executive power, few predicted his evolution into one of the presidents top defenders and loyalists. But it would be more apt to describe Barr as an opportunist who found in Donald Trump the perfect vehicle to empower the executive branch than a Trumpian lackeyeven if in practice the outcomes might seem indistinguishable. Barrs ideology just so happens to match Trumps politics.

Justice Department spokeswoman Kerri Kupec said in a statement that Zelinsky did not have any discussion with the Attorney General, the U.S. Attorney, or any other member of political leadership at the Department about the sentencing and his testimony was based on his own interpretation of events and hearsay (at best), not firsthand knowledge. The Office of Professional Responsibility did look into the antitrust divisions probes of the marijuana company mergers and found no wrongdoing.

Barr set the tone for an unexpected Trumpian tenure in his handling of the Mueller report last year, when he chose to release a four-page letter effectively absolving the president and his campaign of wrongdoing. To many, the Mueller report moment marks when Barr crossed the Rubicon. The letter drew a rebuke from Mueller and his team. At the time, Barr was cast as doing Trumps bidding and whitewashing the Russia investigation. But in hindsight, his motives appear more insidious. His message wasnt that Trump didnt obstruct justice, but a president cant obstruct justice.

See original here:
The Guy Is With the Devil: The Rosemarys Baby Theory of Attorney General William Barr - Vanity Fair

Over a period of 40 years Tom Cook has grown his carpet business froma sole trader operating out of a van to the well-establishedcompanyit is today. A friendly, family-run business with his wife Linda and son Ashley and a team of specialist installers.

To this day the company still holds the initial values that Tom started out with, offering the best of retail values, quality of service, personal attention, and a genuine enthusiasm for their profession.

Rejecting the pile-it-high and sell it cheap ethos of many larger retailers, a visit to Tom Cooks Carpet showroom at Blackminster business park will convince you that you are in the right place. With specialist and knowledgeable staff, the main priority is to assist the client select the most suitable flooring for the location concerned; be it for the smallest room in the house to the complete home.

Fitted by Tom Cook Carpets

Tom and his team have also worked with and alongside interior designers and buyers offering advice and suggestions to achieve a particular look - one that will fit within the design concept- on both domestic and commercial projects.

Working within the clients budget Tom Cooks showroom offers an array of flooring from sheet vinyl, luxury vinyl tiles, carpets - both of natural and manmade fibres - wood laminate, engineered wood and solid wood, all available in a range of colours and designs to suit all tastes and needs. With every conceivable colour, pattern and design, you can be assured that you will be inspired to create a beautiful home whatever your taste desires.

Tom and his family have developed the kind of reputation that ensures a steady stream of customers who recognise the value of Toms family run business and their approach to customer care, experience and satisfaction.

Introducing a new face and skill set to Tom Cook Carpets, Martyn Hood is a new member of the Tom Cook team and has been involved in flooring most of his life he has now gained over 48 years experience in all types of flooring. From a very early age he received training from his grandfather and father on all aspects of installation of all types of flooring. He spent many years perfecting his trade before moving more towards the sales design and estimating side of the family run business. From here he learnt the importance of listening to the customers requirements and guiding them in the right direction to achieve their desired results.

Looking for a new challenge he procured a position with an interior designer in the Cotswolds, where over a period of 20 years, he developed his skills with colours and design on all types of soft furnishings. Working alongside one of the top interior designers in the area, he gained experience on many and varied projects from single rooms to complete houses, hotels and businesses, he offered help guidance and suggestions to achieve the desired results.

This is where Martyn first came into contact with Tom Cook Carpets some 30 years ago. A well-liked and respected local family run business with the same ethos as himself, ensuring that the customer satisfaction was of paramount importance and every job being of the highest standard. Working together on many prestigious projects they achieved the desired result.

Having spent many years working alongside each other for different companies Martyn decided to join Tom Cook Carpets to help grow and develop his company, by offering the same expertise he gave working for a designer, but in a more friendly relaxed environment. Martyn really enjoyed the time spent working with a caring family run business and for the customers that visited the show room.

Sadly Martyn moved on much to the disappointment of Toms son Ashley a leading light in the Tom Cooks organisation. After many years apart Martyn is returning to Tom Cook Carpets and is looking forward to seeing clients that he helped in the past and the excitement of assisting new clients to achieve their dreams of a beautiful home.

So if you have a flooring issue and no one else can help and if you can find him maybe you can get assistance from Martyn or Tom Cook. Give us a ring and maybe you can get book an appointment

Tom Cook Carpets not only offers free expert advice born from product knowledge and experience but also home visits, free measuring and quotation, together with an expert fitting service.

So, a visit to Tom Cook showrooms is a must it will convince you that you have come to the right place a friendly family run business. A company that cares and has the expertise and knowledge to offer something for every taste and budget. No matter how big or small your project is you can be assured of the same attention to detail and quality of service. A family run business with that extra personal touch, where the most important person is you.

You can contact the showroom Tom Cook Carpets on 01386 833766 to book an appointment to meet our experts and discuss your requirements or to arrange a home visit.

Tom Cook Carpets Limited, Unit 8c & 8d, Blackminster Business Park, Blackminster,Evesham, Worcestershire, WR11 7RE

Read the original post:
Familiar face returns to join the Tom Cook Carpets team - Tewkesbury ADMAG

Ever since anyone can remember, America has had a love affair with muscle cars. After all, the concept is uniquely American. Over the years, some muscle cars have fared better than others. In fact, there were muscle cars killed off by the gas crisis. Moreover, some muscle cars have gone completely forgotten just like American Motors Corporations AMX and the 2006 Pontiac GTO.

On the other hand, some muscle car models have gone on to live in infamy. As popular as they are thought, theyve also encountered some serious problems over the years. Check out what we managed to find:

The problem was detected in 2015 to 2017 year models of the Ford Mustang that come with the 5.0-liter engine. According to Fords technical service bulletin, Some 2015-2017 Mustang vehicles equipped with a 5.0L engine may exhibit an oil leak from either valve cover gasket. This may be due to the valve covers warping due to excessive heat.

To solve this issue Ford decided to add fasteners to both of the cars valve covers. No other Ford cars were said to be affected by the problem.

Ford found this problem in 2015 Mustang units that were manufactured in its Flat Rock plant. According to its manufacturer notice, In some of the affected vehicles, the underbody temperature may exceed design limits under certain driving conditions. "

"If the fuel tank and vapor lines are exposed to elevated temperatures for a prolonged period of time, they may develop a fuel or vapor leak. A fuel leak in the presence of an ignition source can lead to a fire. Exposed parking brake cable may also lead to disengagement problems in the parking brake.

RELATED:One Muscle Car That Wed Buy Over The New Mustang Shelby

This problem was detected in the 2002 Chevrolet Camaro and various other vehicle models from different car manufacturers. According to a noncompliance report filed by AJ motorsport in 2006.

The lamps, when manufactured, omitted the amber side reflex reflectors or were replaced with clear side reflectors. As a result, visual sight of oncoming vehicles is decreased or diminished, which may cause collisions or even death. The company also pointed out that there is no warning prior to experiencing reduced visibility on the road because of this issue.

The problem was found among 2003 to 2004 models of the Ford Mustang SVT Cobra. The National Highway Traffic Safety Administration (NHTSA) explained, In those vehicles where the floor carpeting does not fit flush with the sheet metal, the unique rear surface profile of the mustang cobra pedal may allow the pivot pin of the pedal to catch in the cutout on the floor carpeting behind the pedal, interfering with the pedal's ability to return; the result of which could be unexpected, continued throttle application.

RELATED:Watch The Ford Mustang Cobra Jet Drag Car In Action

This particular problem is linked to the replacement keys that were possibly sold with 2010 to 2015 models of the Chevy Camaro.

According to the safety recall report, If these keys are used in the subject vehicles, there is a risk, under certain conditions, that some drivers may bump the key with their knee and unintentionally move the key away from the run position. If this occurs, engine power, and power braking will be affected, and power steering may be affected, increasing the risk of a crash.

This issue affected the 2012 Dodge Charger. It started after the 245/45Z-R20 All Season Performance tire sales code information was not included in the Central Body Controller (CBC) of the car, where the parameters for the Tire Pressure Monitoring System (TPMS) are programmed.

According to the defect information report, Since the BBC configuration in the suspect vehicle population did not include a cold inflation value, a TPMS telltale would only trigger if the tire pressure fell below a default value of 22 psi. The TPMS must send a warning when tire pressure is already 24 psi.

RELATED:11 Dodge Chargers Wed Love To Own (5 That Were Ruined)

General Motors has revealed that the issue affects its 2015 Chevrolet Corvette. According to its manufacturer notice, Some of these vehicles have been built without one of the rear parking brake cables fully seated and engaged. In this condition, the parking brake will only operate on one of the rear brake drums leading to a reduction in the parking brakes operational capability. This reduction in operational capability may cause the vehicle to roll away if parked on a steep gradient. This can also increase the likelihood of a crash.

This problem affects the 2013 Dodge Challenger and according to the defect information report submitted by Chrysler, seven incidents that were linked to this issue have been identified. It is unclear if the issue had caused any injuries.

The report also explained, Some vehicles may experience an electrical short circuit between the Starter Motor B+ cable assembly electrical terminal and the Starter Solenoid. This condition may cause a vehicle fire without warning. All seven vehicles that experienced the electrical short circuit were manufactured at the assembly plant in Brampton.

RELATED:10 Dodge Challengers That Were Modified To Perfection (6 That Were Ruined)

This issue stems from the electro-hydraulic power steering (EHPS) used by the 2011 to 2014 models of the Dodge Challenger and Dodge Charger. According to the safety compliance report, vehicles using this EHPS may experience an alternator diode thermal fatigue failure due to cyclical loads induced by EHPS.

Moreover, the report also explained, Depending on the failure mode and timing, system voltage may drop to critical levels, disabling systems such as the Antilock Brake System/Electronic Stability Control, Engine Control Module/Central Body Controller or result in a loss of vehicle power.

This issue affects several Chevy models including the 2020 Camaro. Because of this, a fuel leak may occur, and this may become an ignition source that could start a fire.

According to Chevrolets safety recall information, The supplier of fuel pumps for these vehicles may have failed to install a component that regulates pressure within the pump. This can result in over-pressurization leading to a crack in certain welds in the pump. If the welds crack, fuel could leak from the pump. To fix the issue, the cars high-pressure fuel pump would be replaced.

NEXT:6 Camaros We Wouldnt Take For Free (And 10 That Were Modified To Perfection)

Next 15 Most Expensive New Cars Of 2020

Read the rest here:
10 Worst Problems Muscle Cars Have Had Over The Years | HotCars - HotCars