Home Builder Developer - Interior Renovation and Design

Want your home to look its best? You should consider our professional pressure washing services. By power washing your deck, siding, driveway, and other exterior areas around your home, you can quickly and effectively remove built-up dirt, sediment, and other debris. This not only helps the areas look beautiful, but it can also reduce wear and tear by getting rid of mold, algae, chalk, insects, weeds, and more. Such build-up will, over time, break down and cause damage to wood / masonry and degrade paint / stains.

Other benefits to pressure washing:

You may be tempted to pressure wash your own home, but the truth is it can be a costly, frustrating, and time-consuming endeavor. Most pressure washers cost $100 per day to rent. You will also have to travel to the rental location, stand in line, get the machine ready, clean the machine, refuel the machine, and return it by the deadline. Instead, contact Mr. Handyman, and we will arrive with the machine, as well as all of the other necessary equipment and detergents / degreasers, and expertly clean the area for you.

Maintain your home and make it look its best! Call (877) 682-6479.

Continue reading here:
Power Washing | Home Improvement Professionals

Construction Cleaning Phoenix AZ

We have over 17 years of experience cleaning construction projects in Phoenix, Arizona. In fact, our construction cleaning company has cleaned over 5,500 new homes since 2006! Construction cleaning Phoenix AZ is our specialty!

We clean newly built homes for some of the largest homebuilders in the Phoenix area. In addition to new home construction, we also work closely with general contractors, design-build firms, and even large commercial builders.Our pressure washing machines can clean a wide range of construction materials.This includesflatwork and structures built from concrete, pavers, stone, exposed aggregate, flagstone, travertine, tile, asphalt, buildings, and block walls.

Our construction cleaning technicians have become experts at removing tough stains and spills. Using hot water pressure washers (temps reach up to 300F at 3,500 psi) enables us to be able to clean up paint spills and oil stains. Hot water pressure washing also helps clean up drywall mud & dust, caulk, tire marks, grease, and many other stubborn substances.

Our role in the construction process is to provide pressure washing and cleaning services during the final stages of both remodels and new construction projects.Here are some of our most requested services:

Final clean of all exterior flatwork.Technicians remove any dirt, debris, tire marks, paint, caulk, that may have accumulated during the construction process.

Emergency pressure washing services for paint spills, oil spills, dust control, track out, or SWPPP compliance.

Preparation for painting and epoxy coatings. This can include building washing, cleaning off block walls, gates, garage floor concrete cleaning, and other critical areas around the construction project.

Blue Stake or graffiti removal. We clean paint from signs, walkways, and community walls using a chemical stripping agentand high-pressure steam.

Stripping off paint and sealer from concrete and pavers. Visit our paver cleaning and sealing website for more information on cleaning and sealing areas around your construction project.

Efflorescence treatment on pavers and retaining walls.This includes using steam and specially formulated chemical efflorescence removers.

Parking lot and street sweeping services. We can customize a service to offer both sweeping and power washing for all of your parking lot cleaning needs.

When you hire our construction cleaning company to pressure wash your project you will be teaming up with a professional organization that has cleaned houses for some of the largest home builders in the Southwest. Call us at 602-373-1515 to speak with a project manager about construction cleaning services at your project.

*References, Insurance Certificates, and W-9s are always available on request.

ACME Powerwash is a Phoenix, Arizona based exterior maintenance company specializing in hot water pressure washing for construction cleaning, residential power washing, commercial property maintenance, and parking lot sweeping.

Looking for a power washingcompany that can clean up around your pool or back patio? Power washing pool decksand surrounding areas is one of our most requested services duringPhoenixs hotsummer months. We clean many types of pool deck surfaces including concrete, pavers, and stone. We use industrial hot-water pressure washers to steam-clean and powerwash away months or years worth of stains, dirt, and grime.

Each of our machines sprays out hot water and steam up to 300F at 3,500 psi.In addition to residential homes, we also clean up around pools at apartment complexes and some of Phoenix, Arizonas top hotels and resorts.

Call 602-373-1515 today to speak to an estimator about cleaning up your summer oasis!

We clean more concrete than any other surface. Our crews are experts atpower washinga variety of substances from concrete driveways, garages, patios, and sidewalks.This featured project is one of 15 new construction homes wepower washedflatworkat this week. While we did clean some dirty pavers, mostsurfaces werenewer concrete with construction-related stains and debris including paint, caulk, stucco splatters, tire marks, scuff marks, and a whole lot of dust and dirt!

Powerwash crews use rotating surface cleaners with multiple spinning jets spraying out hot water and steam to ensure the most uniformly clean surface. When connected to our pressure washers, these cleaners help avoid zebra striping. Each truck also carries a variety of biodegradable chemicals to help remove tougher stainsand debris like paint, oil, and framers chalk. Finally, they rinse down everything with high-pressure wands and hot water up to 300F at 3,500 psi!

Our power washing company has over 16 years of experience cleaning concrete in Phoenix, AZ. For more information about our power washing services please visit any of these pages:

Concrete Cleaning in Phoenix, AZ

Driveway Cleaning in Phoenix, AZ

Construction Cleaningin Phoenix, AZ

Have a concrete cleaning project of your own and want a free estimate? Call 602-373-1515 today!

Continue reading here:
Power Washing Phoenix AZ - Pressure Washing Company ...

Finding your ideal countertop in Virginia has never been easier. Your friends are sure to be impressed with your new countertop. Find what you're looking for with countertops.com vast selection of countertops of every kind. With choices like granite, quartz, wood, laminate and more you will have plenty to choose from. With everything we offer, you are sure to find what you want, at the price you're looking for.

Finding the right countertop in Virginia is now easier than ever with Countertops.com. Countertops.com provides the perfect countertop for your kitchen or bathroom. You know what you want your kitchen and bathroom should look like, our selection makes that possible. It's easy to find the perfect type of countertop with our vast selections of granite, quartz, wood, laminate and other solid surface countertops. We can't wait to help you add the perfect countertop to your kitchen or bathroom.

Our selection of countertops in Virginia is the widest in the state. The only destination to find the perfect countertop is Countertops.com. You know what you're looking for and we will help you find it, with our wide selection and competitive pricing. If you have searched for a countertop but couldn't find the perfect design or color, check our selections of granite, quartz, wood, laminate and other solid surface countertops. We want to help you create the perfect kitchen or bathroom with our wide selection of countertops.

See original here:
Countertops in VIRGINIA - Countertops - Granite, Quartz ...

ript src="https://apis.google.com/js/platform.js" async defer>

Read more:
Countertops | Ashburn, VA

CUSTOMER COMMENT

Highly recommend

Remove existing outdated and ugly materials at Wet Bar in our Family Room. Install new granite countertop and backsplash, including new, updated bar sink and faucet.

Ramazan Karaman (owner) was recommended to us. Ramazan and his team members were so responsive and provided excellent suggestions for our job. Although this was a relatively small job, we were impressed and very pleased with the professionalism, quality of work, and the end result which was such a significant improvement.

We would use Granite Center again, and would not hesitate to select Granite Center for full kitchen countertop installation or other work where granite, marble, etc. were the materials of choice. We highly recommend this company.

Barbara N. | MECHANICSVILLE, VA

$2500 Granite Countertop Everything is Included for $2500 Sink Removal Sink Cutout Edge. Granite Center VA Located at Sterling Virginia VA Get best deal discounted granite countertop sale. Granite Countertops. Visit our showroom at Sterling, Virginia to see best granite countertop deals. 60% Off Kitchen Cabinet Deals.

Continued here:
Granite Center VA | Granite Countertops Sterling Virginia ...

General Requirements | Fees | Partial Refunds | Education and Experience Requirements | Credit for Education | Examination Requirement

Any use of the title "Certified Interior Designer," within New York State requires licensure.

To be licensed as a certified interior designer in New York State you must:

You must submit an application for licensure and the other forms indicated, along with the appropriate fee, to the Office of the Professions at the address specified on each form. It is your responsibility to follow up with anyone you have asked to send us material.

The specific requirements for licensure are contained in Title 8, Article 161, Section 8305 of New York Education Law and Section 52.18 and Subpart 79-3 of the Commissioner's Regulations.

You should also read the general licensing information applicable for all professions.

The licensure fee for Certified Interior Design is $377.

The fee listed is the fee that is currently in place when this page was posted. Fees are subject to change. The fee due is the one in law when your application is received (unless fees are increased retroactively). We will bill you for the difference if fees have been increased.

NOTE: Payment submitted from outside the United States should be made by check or draft on a United States bank and in United States currency; payments submitted in any other form will not be accepted and will be returned. Your canceled check is your receipt.

If you withdraw your application, obtain a refund, and then decide to seek New York State licensure at a later date, you will be considered a new applicant and be required to pay the licensure and registration fees and meet the licensure requirements in place at the time of reapplication.

Eligibility for licensure is based on a combination of education and experience for which years of credit are awarded. The credit awarded for education determines the required number of years of experience.

You must accrue at least seven years of acceptable education and experience credits, including the following:

You may earn two years of education/experience credit for completion of an associate degree interior design program or four years credit for completion of a baccalaureate degree interior design program if the program is:

The Council for Interior Design Accreditation (CIDA - formerly FIDER, Foundation for Interior Design Education Research) is an acceptable professional accrediting agency for interior design for programs accredited at the professional level.

Earlier programs that were CIDA-accredited at the pre-professional assistant level will be reviewed for equivalency to an associate-degree curriculum.

For a program to be considered "equivalent:"

You are required to pass all three sections of the National Council for Interior Design Qualification (NCIDQ) Examination which is administered twice yearly in April and October. The examination consists of the following three sections:

If you have taken the NCIDQ examination prior to October 2000, and were not successful in passing all sections of the examination, then you must take all three sections of the new examination.

If you have passed the NCIDQ examination prior to 1990, you must have also taken and passed the Building & Barrier Free Codes section of the examination prior to October 2000 or taken and passed Section I of the examination between October 2000 and January 2004.

Contact NCIDQ for eligibility requirements, fees, and other examination information at:

NCIDQ 1602 L Street NW Suite 200 Washington, DC 20036-5681 Phone 202-721-0220, Fax: 202-721-0221 Email NCIDQ@NCIDQ.ORG Web http://www.ncidq.org

You must request NCIDQ to send verification of your passing examination(s) to the New York State Education Department.

If you have a disability and may require reasonable testing accommodations for the examination, please contact the National Council for Interior Design Qualification (NCIDQ) for information on the procedures for requesting such accommodations.

Follow this link:
NYS Interior Design :License Requirements

Garage Photos

The first task in garage design is to identify what items need to fit in the garage. Obviously cars need to fit, but weve also designed garages for boats, RVs, and other larger vehicles that require special doors and large, column free interiors. Along with cars, people generally need a place to store gardening equipment, tools, and sporting equipment. With your list of vehicles and items to fit into the garage, you can then begin to figure out how large the garage should be.

If you have the space, you may decide to accommodate extra storage by adding another garage bay. So instead of a two-car garage, you may decide to construct a three-car garage. The advantage to this strategy is that when you sell your home, you can list it as having a three-car garage. However, this is not the most efficient way of creating more storage space, because nothing can be stored easily on the garage door wall. If you are interested in storage space rather than another parking space, it is often better to add additional space to the back of the garage, making the garage deeper to allow for storage in front of the vehicles, or to add space on the side of the garage that is dedicated to storing tools or other belongings without another garage door.

Often, garages are constructed with columns in the center or between each car. We try to avoid this when possible, because columns get in the way and reduce the flexibility of the use of the area. It is often worth either upsizing ceiling joists, using trusses, or adding beams in order to get rid of columns. A clear span garage will be a much more useful space.

For garage access, consider the doors that vehicles enter as well as the doors that people enter. If a person-size door is not necessary, we tend to recommend the installation of an electronic key pad near the exterior of the garage door to open the door for access. This generally makes the garage more secure, because the vast majority of break-ins are through person-sized doors, which are often left unlocked. If security is an issue, consider installing a steel door with no windows in the garage (if you want light, install skylights instead, which are much less likely to be broken to gain access).

When choosing garage doors, choose a size large enough to park a car easily. If you can enter your garage straight forward, the minimum width for a single car door is 8-0. However, if you have to turn into the garage door, a 9-0 wide door is much easier to confidently maneuver into. For materials, consider maintenance requirements and longevity. A steel or aluminum door will last a long time, is often insulated, and wont require painting, but the color choices can be limited. Some wood doors are beautiful, and often dont cost more than a well-made metal door, but require periodic refinishing to be sure they dont rot. If you want a wood door, consider deeper roof overhangs to shield the door from rain and sun, as well as using high quality exterior grade wood finish to protect the wood.

Read the original here:
Seattle Garage Additions - Seattle Architects ...

Garage Interior and Drywall. Getty / Phil Banko

By Lee Wallender

Updated December 16, 2014.

Garage insulation may seem like a strange concept. After all, garages in days of yore were detached structures that had little or no relation to indoor living spacesto the main house itself. And since these bare-bones boxes were enough to provide minimal coverage to vehicles, there was no need to load up on insulation.

But when garages attached themselves to houses, and people began spending more time in the garage itself, it became necessary to provide insulation if only to protect the house itself. Learn the basic concepts behind garage insulation and what you should do (or not do):

Newer, better garage doors are insulated; most are not. One way to fix this is to insulate the garage door, using a kit.

What you get are rolls of reflective insulation designed to fit between the garage door's support rails. I've looked at these kits and see nothing amazing about them; you can do the same thing by buying your own reflective insulation.

In any case, here is a kit: Buy Direct - Single-Sided Door Insulation

Wind positively whistles through the bottoms of most garage doors. This is because the seal at the bottom is inadequate. Also, garage and driveway slabs can tilt over time, creating gaps that the garage door bottom cannot cover. Use a garage door threshold kit to solve the problem. It's inexpensive and goes down quickly.

Buy Direct Garage Door Threshold Kit

If the above don't do the trick, then look at your door to the garage. Is it an exterior, fire-rated door (we hope)? If not, some previous homeowner may have put a highly non-insulated hollow core door there. Solid wood doors are better but not by much.

Now we're getting into the more work- and money-intensive projects. Is the wall between the house and garage insulated?

Go out in the garage, put a 1/8" auger bit on your cordless drill, and drive a hole into the wall at an out-of-the-way spot one or two feet off the ground. Don't drive into a stud. And be sure to flip off any circuit breaker that might even remotely have wires running through that wall. Because this is a key location (service panels are often located in garages), you may want to raise the garage door for light and turn off every circuit breaker.

If you have batt insulation, it will come up on your auger almost like cotton candy. If not, you may want to cut a larger hole so that you can look in there with a flashlight and see if you have blown-in insulation.

You can insulate the wall with blown-in insulation, or if you really want to go crazy, you can pull off drywall and insulate with batt fiberglass. Or, build a second wall just for the purpose of holding the batts.

Go here to read the rest:
Is Garage Insulation a Contradiction of Terms?

Remodeling and contractor services in the following areas: Bay Village, Beachwood, Bedford, Bedford Heights, Bennetts Corners, Bentleyville ,Berea ,Bratenahl ,Brecksville ,Broadview Heights ,Brook Park ,Brooklyn ,Brooklyn Heights ,Chagrin Falls ,Cleveland ,Cleveland Heights ,,Collinwood,,Cuyahoga Heights ,East Cleveland ,Euclid ,Fairview Park ,Garfield Heights ,Gates Mills ,Glenville,Glenwillow ,Highland Heights ,Highland Hills ,Hunting Valley ,,Independence ,Jaite, Kamms Corner,Lakewood ,Linndale ,Lyndhurst ,Maple Heights ,Mayfield ,Mayfield Heights ,Middleburg ,eights ,Moreland Hills ,Newburgh Heights ,Noble,North Olmsted ,North Randall ,North Royalton ,Nottingham,Oakwood ,Olmsted Falls ,Orange ,Parkview,,Parma ,Parma Heights ,,Pepper Pike ,Richmond Heights ,River Edge,Rocky River ,Seven Hills ,Shaker Heights ,Short Line Junction,Solon ,South Brooklyn,South Euclid ,Strongsville ,University Heights ,Valley View ,Walton Hills ,Warrensville,Warrensville Heights ,West Dover,West View,,Westlake ,,Willow,,Abbeyville,,Acme,,Beebetown,,lake,Boneta,Briarwood Beach,Brunswick ,Buzzard Roost,Chatham,Chippewa Lake ,Chippewa Lake Park,Chippewa-on-the-Lake,Clark Corners,Coddingville,,Crawford Corners,Echo Lake Glen,Erhart,Esselburn,Friendsville,Garden ,sle,Gloria Glens Park ,Granger,Hardscrabble,Hinckley,Homer,Homerville,Lafayette,Lester,Litchfield,Lodi ,Mallet Creek,Medina ,Pawnee,Poe,Remsen Corners,River Corners,River Styx,Seville ,Sharon Center,Sherman Corners,,Spencer ,Valley City,Valley City Station,Wadsworth ,Westfield Center ,Weymouth,Windfall,Youngs Corners,

View post:
Cleveland Ohio Basement finishing and remodeling contractors

Increase your living space and home value with help from the experts at Portico. Our professionals can complete any home addition, construction or remodeling project you desire. Revolutionize one or many areas in your home by adding an outdoor living area, replacing your old, worn out windows, finishing or even renovating your Minnesota and Wisconsin basements. The original area will not be recognizable after our carpenters have completed your updates. Our finished work will leave you jaw dropped, and at a loss for words. Youll be happy to wake up and enjoy the features in your home daily and for years to come.

While we install windows for all rooms, and also remodel and complete basements, our specialty is outdoor living. Sunrooms, porches, patios, and decks are what we love to do. Its our goal to give people the space and opportunity to fully enjoy their home and the sun that shines on it. But if it shines a little too brightly, we can take care of that too. We also have awnings, canopies, and solar shades so that you can be comfortable wherever you are on your property.

In Minnesota, we are always searching for ways to enjoy the sun and outdoors or at least a view of the outdoors year round. When you have a sunroom or four season porch built onto your house, you can do exactly that. Our experts are here to help you get the most enjoyment possible out of your home. With a room designed for ample sun, theres no longer as much of a need to take vacation in the middle of winter any more. Or to drive on over to St. Paul to visit the Como Conservatory for some warmth and greenery. When you have a sunroom or four season porch installed, you will be adding your own personal spot for warmth and greenery. You can grow herbs for cooking and flowers for smelling. The possibilities are endless.

Portico understands every client is unique; no one style fits all. That is why we sit down with you prior to any construction and get to know your tastes. Once we have a sense of your style we can make suggestions that will help you in the process of deciding what layout, materials, size and amenities would work best for the project at hand. Some clients are more concerned about choosing materials that are low maintenance, while others have no problem maintaining an area if it means they can get their dream design down to every last detail.

We pride ourselves on courteous customer service and we can back it up! Portico received a 2013 Super Service Award from Angies List. Also, our company has been a BBB accredited business for three consecutive years. Our remodeling contractors are always on time as we completely understand that you have more to do in your day than sit around waiting for expected services. Because of our years of experience and knowledge of previous home renovations, we will give you an estimated time until completion and follow through with it.

At Portico, the highest quality is our only quality!

Read more from the original source:
Minnesota Home Remodeling - Window Installation MN