Home Builder Developer - Interior Renovation and Design

Tree removal can be a laborious job for an inexperienced individual when it comes to tree stump removal methods, but you just need to identify your options before you start on your tree removal adventures. First, tree removal methods abound, and there is a particular tree removal system that can be perfect for your needs. If you own a chainsaw or an axe grinder, you can opt to go through the manual tree removal method yourself. You can use your chainsaw to cut the trees into your preferred length in order to grind the stump accordingly in an efficient and convenient manner. But without the necessary experience in grinding tree stumps or even the initial method of cutting trees with a chainsaw, this can both be dangerous and hard work indeed.

Then, you can also opt to cut the trees with a chainsaw and subsequently dig out the tree stump afterwards. This can be very tedious and time-consuming, but this would be the perfect option for you to take in case you don't have the skills that are necessary when it comes to tree stump grinding. Finally, when you don't want to go through the hassles of cutting down trees and subsequently digging out or grinding the tree stumps, you can hire specialists in this particular field that work for tree removal service providers. Just keep in mind that this method need not be expensive, so you should always compare rates of the most established tree removal service providers before you obtain tree removal services.

See more here:
Tree Removal Services Directory - DIY, Safey, Methods ...

Authors as Published

Susan C. French, Extension Technician and Bonnie Lee Appleton, Extension Horticulturist, Virginia Tech

Evergreen trees have leaves that persist year round, and include most conifers and some broad-leaved trees. Evergreen trees generally need less pruning than deciduous trees.

Conifers are distinguished from other plants by their needle or scale-like leaves, and their seed-bearing cones. Because conifers have dominant leaders, young trees rarely require training-type pruning. The leader is the vertical stem at the top of the trunk. If a young tree has two leaders, prune one out to prevent multiple leader development. Selective branch removal is generally unnecessary as evergreens tend to have wide angles of attachment to the trunk.

Corrective pruning for evergreen trees consists mainly of dead, diseased, or damaged branch removal. Remove dead wood promptly, by cutting dead branches back to healthy branches. When pruning diseased branches, make thinning cuts into healthy wood, well below the infected area. Thinning cuts remove branches to their points of origin or attachment. Disinfect tools between each cut with products such as "Lysol," "Listerine," or rubbing alcohol. Tests have shown that "Pine-Sol" and household bleach are highly corrosive to metal tools.

Allow evergreen trees to grow in their natural form. Don't prune into the inactive center (no needles or leaves attached) of whorl-branched conifers because new branches won't form to conceal the stubs.

When a tree's leader is lost due to storm damage or disease, replace it by splinting to a vertical position the upper lateral on the highest branch. Prune all laterals immediately below the new leader. Use wood or flexible wire splints, removing them after one growing season.

Current pruning recommendations advise against pruning branches flush to the trunk. Flush cutting is harmful in several ways: it damages bark as pruning tools rub against the trunk, it removes the branch collar, and it goes behind the branch bark ridge. The branch collar is the swollen area of trunk tissue that forms around the base of a branch. The branch bark ridge is a line of rough bark running from the branch-trunk crotch into the trunk bark, less prominent on some trees than on others.

The best pruning cut is made outside the branch collar, at a 45 to 60 degree angle to the branch bark ridge. Leave the branch collar intact to help prevent decay from entering the trunk.

Whenever removing limbs greater than one inch in diameter, use the three-cut method to avoid tearing bark. First, about 12 inches from the trunk, cut halfway through the limb from the underside. Second, about 1 inch past the first cut, cut through the limb from the top side. The limb's weight will cause it to break between the two cuts. Make the third cut outside the branch collar, as described in Publication 430-456.

Here is the original post:
A Guide to Successful Pruning, Pruning Evergreen Trees ...

We are experts in Tree Removal and Safety

Arborwest Tree removal professionals remove many trees and stumps throughout the year, but they have to take various precautions and measures to protect themselves from fallen limbs and possible injuries. Even then, many still get hurt after taking steps to protect themselves. Tree removal is just a very dangerous job. Thats why homeowners should always hire a professional instead of doing it themselves.

Below is more information associated with tree removal safety, including injury statistics, information on the dangers of tree removal, safety equipment involved in the process, and tree removal experts safe processes. If you have any other questions about tree removal safety, you can always call or ask a tree service professional in your area.

According to the US Bureau of Labor Statistics, there are 200 tree-related fatal injuries on average every year in the United States. In 2012, there were 60 injury-related deaths for tree maintenance, with another 120 fatal injuries in forestry and logging services.1 In 2011, the BLS reported 83 tree maintenance injury-related deaths and 125 forestry and logging fatalities from injuries in the field.2 In 2010, 120 forestry and logging service injury-related deaths were reported, with an additional 60 tree maintenance deaths.3 Injury causes included contact with objects and equipment like chainsaws or axes, falling from trees, and transportation incidents.4

Note these numbers only include injuries that resulted in death, as compiled from the Census of Fatal Occupational Injuries (CFOI). There are thousands of other injuries from tree care and removal in the United States every year that should be treated with serious consideration.5 Many dangers come with the job, and all the precautions in place sometimes dont protect from injury.

One of the first major dangers associated with tree removal are the tools. Chainsaws, wood chippers, and other power or hand tools required for tree removal can be dangerous. With even the smallest distraction, a chainsaw or ax can inflict serious damage to hands, legs or arms in just a second. This will then lead to financial damage in terms of hospital costs and recovery. Tree service professional use the tools every single day on the job with proper clothing and still get hurt.6 If someone has no previous experience using the tools, they run the risk of serious harm.

Another major danger with tree removal is the tree itself. There are a wide variety of dangers associated with trees when attempting to remove them. First, theres the fact that without the proper equipment, people run the risk of falling from the tree and hurting themselves.7 Even with the proper equipment, weak limbs can act as bad support systems leading to falls. Second is the possible proximity to electrical lines. If someone is working on a tree close to power or telephone lines and falls back towards one or hits it with their equipment, they could get electrocuted.8

Then there are the possible hazards in or on the tree itself. Some trees could be home to poisonous insects and plants that, without the proper clothing, could lead to a hospital visit. Thats why tree removal professionals wear heavy-duty work gloves and other protective gear when scaling trees. Trees can also sometimes have poisonous chemicals leaking onto them from power lines, which is why professionals carefully inspect trees before taking them down. The Occupational Safety & Health Administration (OSHA) outlines various regulations when dealing with hazards like these.9

One other major hazard inside the tree is rotting wood or deadwood. If the tree is in the process of dying, this mean its unstable and unpredictable when coming down. Dead or dying trees often have hollowed-out trunks and unstable limbs that make it hard to use regular power tools without increasing the risk. Often the best, although most expensive, way to get a dead tree removed involves a crane.10 So if you start seeing signs of rot in your tree, dont wait until its already dead to have it removed.

View post:
Tree Removal San Diego CA Arborwest Tree Services ...

Nuisance fruit is a concern for many people including homeowners, landscapers, and park and city officials. The fruits and seeds of some trees and shrubs, such as buckthorn, mulberry, persimmon, and (female) ginkgo are unsightly, smelly, and have the potential to be a hazard when they fall on sidewalks, driveways, and other areas in a landscape. Foliar sprays are available to reduce or eliminate undesirable fruit development on ornamental landscape plants, but factors such as timing, plant stresses, environmental conditions, and lack of thorough applications may make complete control impossible. Results will vary with each chemical designed to eliminate fruit.

Trees and shrubs are usually selected for landscape use based on their ornamental features, such as spring flowers, fall color, and fruit. All trees and shrubs produce some type of flowers and fruit, whether inconspicuous or showy. Fruit production is part of the plants natural development. A plant that produces a large amount of fruit may be a desirable ornamental feature or be used to feed wildlife. Despite the value of a flowering and fruiting plant, some people consider spent flowers and fruit that fall undesirable litter. There are several methods to remove fruit or prevent fruiting. Hand-removing spent flowers or small fruits will work on a small tree, but is not a practical solution for large trees or extensive plantings. Chemical or hormone-type sprays are a more practical method, but spraying your tree can be a costly and time-consuming venture. Consider the following before you decide to spray:

Amount of fruit production. The amount of fruit a plant can produce varies from year to year. Many plants will produce heavily one year and lighter the next. Insect, disease, and damage to flower blooms can reduce fruit production. Hand-removal of spent flowers is one way to eliminate unwanted fruit.

Plant removal. If maintenance is a problem, does the plant warrant keeping? Attempting to remove fruit will become a yearly expense of time and money. When all options have been considered, plant removal may be the best alternative, and replace with a plant that holds its fruit (i.e., some hawthorns and crabapples).

Size of tree. If the tree is too large to do the work yourself, you may have to hire a licensed professional to achieve adequate results.

Timing of application. Whether you hire a professional or do the work yourself, it is essential to spray at the proper time for best results. The window of opportunity varies with the species and cultivars (varieties) of a plant.

Timing. The window of opportunity for chemical or hormone-type sprays is during flowering before fruit set, usually from flower buds to the full bloom stage. It is imperative that you spray at this time for chemicals to be most effective on the flower bud. Spraying before or after flowers results in wasted time and money.

Temperature. Hormone-type sprays are influenced by weather conditions. Daytime temperatures at the time of application should be between 60 degree F and 95 degree F for best results.

Use correct concentrations. A concentration too low can increase fruit set. Excess hormone applications will cause damage to the plant.

Spray stress-free plants. Plants being treated should be healthy and vigorous. Spraying plants under stress can cause additional damage to a plant. The chemical ethephon, used to stop fruiting, breaks down into a natural plant hormone, ethylene. Plants under stress from drought, high temperatures, insect and disease problems, or environmental stress, such as compacted soils, poor drainage, or improper pH will produce ethylene. Too much ethylene can be harmful to plants, causing injury symptoms such as leaf scorch, stem damage, or defoliation, further weakening the condition of the plant.

Here is the original post:
Preventing or Reducing Fruit on Ornamental Trees and Shrubs

Testimonial for a tile work Repair Pro
Testimonial for a tile work.

By: Dario Salas

Read the original here:
Testimonial for a tile work Repair Pro - Video

Professional Tile Installers

Installing new tile can fix up a bathroom, kitchen, or any other area of your home with the right design and craftsmanship. In fact, bathrooms and kitchens often provide the greatest return on investment when it comes to your home's value. Whether preparing your home for sale or improving the design,tile installation and repair can provide an updated look that transforms the appeal of your entire home.

Simply call 1.877.674.2639 to find the Mr. Handyman near you and request service. Our professional tile installers will arrive ready to help with all types of tile, including:

- Ceramic Tile- Porcelain Tile- Stone Tile- Glass Tile

We know you've got plenty to do. Get out and take care of the things you want to do by delegating tasks like tile installation and repair to the professionals from Mr. Handyman. Our tile installers will be pleased to complete both tile installation and tile repair tasks throughout your home. Find the local Mr. Handyman in your area and request service today. Spend your time the way you want to spend it, and let us take care of your "To Do" list!

From the bathroom to the kitchen, from ceramic to glass, Mr. Handyman can install and repair all types of tile. Our tile installers will keep installation and tile repair from becoming a larger, more expensive project later on with our expertise. Call today!

See original here:
Professional Tile Installers: Mr. Handyman Tile ...

1074 Harrison Street Denver CO 80206
1074 Harrison Street Denver CO 80206 View Property Details and Additional Photos: http://www.listingsmagic.com/99175 Don #39;t miss this updated home on a spacious corner lot in the heart of...

By: Keller Williams Advantage Realty

Read the original:
1074 Harrison Street Denver CO 80206 - Video

Some kid getting mad because his dad sheds games
No!!!!!

By: james osborne

Go here to see the original:
Some kid getting mad because his dad sheds games - Video

Welcome to Texas Integrity Septic Pumping, Repair & Maintenance. We deliver reliable septic services at reasonable prices for homes and businesses in Denton, TX, Lewisville, TX, and surrounding communities. Whether you need septic tank pumping, sewer pumping, maintenance, or septic repair, our experienced professionals respond promptly to your call with superior service and quality workmanship.

Is the septic full or do you have another problem with your system? We provide comprehensive residential and commercial septic service for septic pumping and septic tank cleaning, including conventional septic tank and aerobic tank services. We pump, clean, and prep the tank with treatments, haul away all sludge and use environmentally responsible disposal practices. In addition to septic pumping, maintenance, and repair, we carry out septic inspections, city sewer connections, and lift station pumping and cleaning.

When the septic tank is full, sewerage may come through the pipes into the sinks, tubs, or showers. When you are having a problem with your system, you can rely on our professionals to respond quickly to your call. In most cases, we are able to perform same day service and emergency service, and were also available 24 hours a day, 7 days a week. Regular maintenance of your septic system will help to prevent this problem and other problems.

You will find additional information about Texas Integrity Septic, Pumping, Repair & Maintenance and our septic services on our website. Please contact our office at 940-479-0189 to schedule service or request a free estimate for service at your home or business in Denton, TX, Lewisville, TX, or the surrounding areas.

Read the rest here:
Septic Tank Denton TX | Aerobic Tank, Sewer & Full Septic ...

2 6Th Ave, Wanaque, NJ 07420
Immaculate 3 Bedroom Cape Cod, Newer Bath Kitchen, Dining Room, Newer Family Room Addition 20x02, Newly Painted Driveway Recently Re-done, Backyard with Patio Shed.

By: Better Homes and Gardens Rand Realty Video Property Tours

Read this article:
2 6Th Ave, Wanaque, NJ 07420 - Video