Home Builder Developer - Interior Renovation and Design

The man who attempted to remove a solar light fixture from a Dededo home in broad daylight has been arrested.

His efforts were caught in a surveillance video that went viral on social media.

Police identified Raul Jose Quinata, 24, who could be seen in the video trying to remove screws that fastened the fixture to a wall. He couldn't manage to loosen the fixture and ended up breaking it before walking away.

The case was assumed by GPD'S Criminal Investigation Division for a follow-up investigation, according to Guam Police Department spokesman Sgt. Paul Tapao.

Quinata was arrested for the following offenses:

Criminal Trespass

Criminal Mischief and

Attempted Theft of Property

Quinata was subsequently booked and released.The case was sent to the Office of the Attorney General for prosecution.

Original post:
Man who tried to remove solar light fixture from Dededo home arrested - The Guam Daily Post

Test setup

Here atBelow the Line, weve been covering the COVID-19 pandemic and how its affected production for the past year. More importantly, weve been focusing our attention on howshows are discovering new ways to keepthe camera rolling while also keeping everyone safe.

With that in mind, heres another example of necessity being the mother of invention as production house Monkey Deux, led byAlan Griswold,had to figure out a way to make a second season ofOur Star Wars Stories, a digital series forLucasfilm andStarWars.com,without some of the luxuries it had for the first eight episodes, including a full production team. The general principle ofOur Star Wars Stories is that hostJordan Hembrough talks with real-lifeStar Warsfans about the inspiring tales that connected them to the sci-fi franchise, including a full production crew.

Below, you can learn how Griswold and his team put together a DIY kit for the interview subjects to light and film themselves for the series.

Priorities for a new workflow

Griswolds goal shifted to developing a new remote workflow and putting together 5 production kits, each in a single case weighing 32 pounds. One would go to Hembrough in New Jersey, who is also a producer and lines up many of the subjects for the stories. The other 4 would go out to the various interviewees who would each have to set up their own gear, soup to nuts: position the camera, lighting, and telecommunicate with Griswold and the rest of the team. Fortunately, Griswold had plenty of remote shooting resourcefulness to make up for the lack of in-person crew.

Lighting was a good place to start. A self-professed gearhead, Griswold has been using BB&S Area 48 LED softlight for years and experienced the color accuracy of the Remote Phosphor design. I had worked with the lights before and knew that since there would be lots of other variables knowing that I could trust the color of their output was a good start for me, Griswold explains, The key is the most important thing. If you know that the key is an exact color you can build the rest around that. You dont want your person to go green or pink.

This time size mattered. Toby Sali at BB&Sencouraged him to try out their remote phosphor Pipeline Reporters and Griswolds problem was solved. He chose 2 each of the 1 Reporters per kit, on desktop stands. With an inline dimmer, they would keep it neat and simple to adjust while looking cooler than most practicals that find their way into frame. Best of all, Griswold knew there would be no spikes, or green glowhe could count on the 97 TLC for color rendering. He also added Pipeline Free versions without stands to go to the hosts home studio.

His criterion was that someone who didnt know much about cameras or lighting could set it up. It was a juggle between whats best, compared to whats simple, he adds. He came up with a simple yet dynamic 2-camera position setup, one wide and one close. He would get on a Zoom and explain how to set it up complete with cables and lighting, test it, and eventually how to pack up into the case and ship back to him.

What was in the Kit?

Packed kit

The participants would receive a snugly packed kit that had been fully sanitized at the Monkey Deux office. The first item they would pull out was a MacBook Pro laptop, preprogrammed with TeamViewer. That would get them online with step-by-step instructions led by Griswold. Next was the Canon EOS R camera that would always be set at face detect autofocus to avoid complications. Ditto with the Sigma 24mm prime lens. Before going remote, I usually use cine prime lenses, but primes were even more important on this project, says Griswold, It cuts out the variables and the setups were at their desktops, so a prime made sense.

The second camera was an iPhone on a travel tripod that worked out fine for the over-the-shoulder shot of the interviewees. Griswold did the settings from his office. They recorded to Atomos Ninja due to its capacity to record in a 10-bit color space.

Regarding the lighting, Griswold says, With their simplicity, size and color reliability the Reporter lights really helped me reduce the number of variables. What you see remotely is not super accurate. You need to trust and you need dimmers. With the Reporter it was easy to say: take the light on the right up and dim the left down. They are fun lights and look cool. When you are dealing with people who dont do it for a living, the cool factor counts, and Im officially over ring lights.

Set up and GoSet up took between 1 and 2 hours each. Griswold says he helped set up in my office with the subjects watching and setting up remotely. John Harper, Lucasfilm producer overseeing production, would also weigh from his desk in northern California to tweak the lighting or the shot composition. I have a whole new respect for people who do tech support, adds Griswold.

The following day they would do final adjustments and the actual interview. It was a busy time with a lot to monitor with the two remote cameras being operated simultaneously. During the interviews the Lucasfilm editor, Frank Knight, as well as producers Matt Martin, Dan Brooks, and Executive Producer Mickey Capoferri joined the Zoom and weighed in. Everyone was an integral part of the process.

Thankfully the participants were so excited about telling their stories that they enthusiastically participated. My job was to make them look good and feel they are in good hands. One of the most rewarding parts was when we finished the setup and folks could see themselves well lit. The fact that they did it gave them a sense of accomplishment. They were grateful to have been selected to be a part of the series. I think we all had a good feeling of satisfaction, concludes Griswold.

You can watch Our Star Wars Stories at StarWars.com.

More:
Our Star Wars Stories has to Find New Way to Keep Cameras Rolling - Below the Line

Looking outside at another cloudy sky, on another dreary winter day in the Midwest?

Experts say it makes sense that a lack of sunshine leaves us grumpy and tired.

The antidepressant properties of sunlight have been known since antiquity, says Leslie Swanson, Ph.D., associate professor of psychiatry at Michigan Medicine and an expert in behavioral sleep medicine at the Michigan Medicine Sleep Disorders Centers. Morning bright light is an effective antidepressant for both seasonal affective disorder and non-seasonal depression.

Swanson says bright light increases mood-positive neurotransmitters, such as serotonin, in the parts of the brain that regulate mood. And you can reap those benefits using a light therapy box in your own home, if a sunny morning walk or commute to work isnt feasible.

And you may find yourself sleeping better, too. Swanson says morning bright light can resynchronize your internal clock and realign your circadian rhythms with your sleep-wake patterns, which improves sleep and increases alertness.

While anyone can find a boost from light therapy, Swanson notes it can be most powerful for people struggling with seasonal affective disorder or depression, along with those wanting to sleep better.

MORE FROM MICHIGAN: Sign up for our weekly newsletter

People who live further from the equator say, for example, in the Mitten State can be more vulnerable to seasonal affective disorder during dramatic seasonal reductions in light exposure, Swanson says.

She adds that people with eye conditions, people who use a medication that increases light sensitivity, people who have a medical condition like lupus that can impact light sensitivity, or those who have a history of bipolar disorder shouldnt try light therapy on their own talk to your physician first.

Swanson has her patients start by sitting in front of a light therapy box for half an hour each day, as soon as possible after waking up.

Make sure whatever device you choose filters out ultraviolet light, which can damage eyes and skin, she says.

See the rest here:
Seeing the Light of an Improved Mood - Michigan Medicine

Today Epic revealed the latest crossover for its battle royale hit, which brings the retrofuturistic world of Tron into the game.

There are ten different Tron-themed skins available in the in-game store right now, and each has a removable helmet. You can also get a Light Cycle glider and an Identity Disc pickaxe. Its not yet clear whether youll be able to throw it.

Welcome to the Grid.

Gear up as Grid Warriors and fight for the users! Tron Outfits are in the Shop now.

More info: https://t.co/brB6ItQaeH pic.twitter.com/XwXFIbh0Il

This season of Fortnite has been particularly busy when it comes to licensed crossovers. The season debuted with the inclusion of The Mandalorian and Baby Yoda, who have since been joined by Kratos, Master Chief, the Predator, and G.I. Joes Snake Eyes. Theres also been a new skin based on Spanish streamer TheGrefg, and a line of soccer skins based on real-world teams. This followed a season that was entirely Marvel-themed.

Truly, no brand is safe.

See the article here:
Tron invades Fortnite with Light Cycles and new skins - The Verge

We hope your favorite color is blue because youll be seeing a lot of it from nearly every room in this bayfront home.

Perched on .62 acres, this weeks dream home is located in the private neighborhood of Cedar Beach in Southold. It contains four bedrooms, four bathrooms, and a layout intended for privacy, comfort, and serenity.

1 || 3

The home spans two wings, each with bedrooms and entertaining spaces. The center of the home features an updated kitchen, formal dining, a living room with a fireplace, and a sunroom, all with magnificent waterviews, said listing agent Jeanmarie Bay of Town & Country Real Estate.

The second floor of the west wing includes a guest ensuite with chic finishings in the bath that includes a bay view jacuzzi, as well as two additional bedrooms and a full updated guest bath. On the east side of the house, a private master wing begins with a separate entrance, a living room with a fireplace, and a wet bar. The second floor of the east wing includes a master ensuite with a private waterview terrace and an updated full bath, Bay added.

1 || 2

The home, which faces south and overlooks the Peconic Bay, also features a spacious deck, a new bulkhead, and private association beach rights.

Youll easily feel on vacation in this home. With the bay right outside your back door, there is no easier way to get out onto the water or lounge seaside with a cocktail and a book in hand. Youll be relaxing in no time at all.

1 || 3

It is listed at $2,385,000.

See the complete listing here.

See the rest here:
North Fork Dream Home: Southold waterfront home with soothing views and tons of natural light - Northforker

When it comes to remediating mold it's always best to hire a professional mold removal and remediation service.

However, if the mold in your home is not toxic and the area of mold growth is small (less than 10 square feet, or the equivalent of roughly a 3 by 3 foot patch) then you can perform the mold remediation yourself if you wish.

This is why you should wear protective clothing and equipment while performing mold remediation.

Protective equipment for mold remediation includes:

You also need to minimize dust as mold spores often stick to dust and are then transported around your home by the dust particles.

After this use a solution to remove the mold from the surface. Different solutions will work better for different surfaces.

The Mold Removal page describes how to kill mold with several solutions such as:

For porous materials (eg drywall, carpet, books) that have had mold growing on them you should decide whether they are salvageable on a case by case basis depending on how severe the mold growth is and how valuable the item is to you. If the item is not highly valuable to you and the mold growth is extensive so that the item is beyond repair then the best option is to dispose of it and replace it.

You should clean each room one at a time, completely finishing the mold removal process before moving onto any other rooms with mold growth and re-sealing and repeating the process.

2020 Moldpedia.com

Follow this link:
Mold Remediation Process, Abatement, Clean up

What are the 5 levels of Mold Remediation?

According to Vicki Lankarge in her book What Every Home Owner Needs to Know About Mold & What to Do About It, mold remediation can be broken up into 5 levels: level one being the least contamination, level four being the most, and level five HVAC and air conditioning systems.

When dealing with mold contamination in your home it can be difficult to decide when a mold remediator is needed or what you can take care of yourself.

In the following 5 levels, you will have a guideline to go by when removing mold from your home :

5 Levels of Mold Remediation

Smaller infestations categorized in level I is mostly found on ceilings or baseboards. Level I mold contamination may be cleaned without hiring a mold remediator, but there are several important safety precautions that you need to know :

1. Do not attempt cleaning mold if you suffer from asthma, allergies, or immune disorders

2. Wear gloves, eye protection, and an N95 disposable respirator

3. Vacate from your work area any infants less than 12 months old, individuals recovering from recent surgery, anyone with a suppressed immune system, or people with chronic lung diseases such as asthma, sever allergies, emphysema, etc.

4. Contaminated materials that cannot be cleaned should be removed from your home in a sealed plastic bag to prevent an infestation in another part of your home.

5. Clean your work area when youre done with a damp cloth or mop.

6. Make sure all areas are left dry and visibly free of mold contamination.

To remove mold from an area category the size of level II (probably one wall panel), the same precautions used in level I should be taken as well as the following :

1. Moldy materials should be covered with plastic sheets and sealed with tape before any handling or removal of materials. This will contain dust and debris. It may be wise to double wrap in plastic before escorting the moldy material from your home.

2. WHen the mold removal is finished, vacuum the work area with a HEPA vacujum. Clean the area with a damp cloth or mop.

Mold contamination this size (patches of mold on several wall panels), should still be handled with the same precautions as level I and II as well as the following added measures :

1. Seal ventilation ducts/grills in the work area and areas directly adjacent with plastic sheeting.

2. Vacate everyone from your work area until work is completed. Further vacate adjacent work areas of any infants less than 12 months old, individuals recovering from recent surgery, anyone with a suppressed immune system, or people with chronic lung diseases such as astma, sever allergies, emphysema, etc.

An infestation depending on how much greater than 100 square feet may require the assistance of a mold remediator. If not, the same requirements should be followed as were needed in levels I, II, and III along with the following :

1. Every worker must be trained in the handling of hazardous materials and equipped with full face respirators with high-efficiency particulate air (HEPA) cartridges, with disposable protective clothing covering both head and shoes.

2. Make sure workers completely isolate hteir work area from the rest of your home with sheeting sealed with duct tape, including ventilation ducts/grills, fixtures, and any other openings.

3. Make sure workers set up and use a decontamination room, or a chamber taped off with plastic sheeting. The outside of sealed bags containing contaminated material should be wiped down with a damp cloth or HEPA vacuumed in the decontamination chamber prior to their removal.

4. Air monitoring should be conducted prior to moving back into your home to determine if it is fit to reoccupy.

If there is a small area of mold growth beneath your air conditioning system it would be safe to apply precautions from levels I and II to remediate the mold contamination. However, all remediation procedures for air conditioning units and HVAC systems should be left to professionals. Procedures for level V remediation for areas larger than 10 square feet are the same for all previous levels with the following precautionary measures added :

1. Shut down the HVAC system prior to remediation.

2. Growth-supporting materials that are contaminated, such as the patper on the insulation of interior lined ducts and filters, should be removed and sealed in plastic bags.

3. A variety of biocides broad spectrum antimicrobial agents designed to prevent the growth of microorganisms are recommended by HVAC manufacturers for use with HVAC components, such as cooling coils and condensation pans. HVAC manufacturers should be consulted for the prodcuts they recommend for use in their systems.

Further Recommended Reading :

Joslyn from the MoldBlogger team

Source: Lankarge, Vicki. What Every Home Owner Needs to Know About Mold & What to Do About It. 52-58.

Link:
5 Levels of Mold Remediation Mold Blogger

Local and state laws may require a specific inspection and documentation protocol based on the size of the affected area. We can advise you on this process, providing guidance based on your unique situation.

With mold being a constant staple to every environment we encounter throughout the day, it is no surprise that heightened humidity or exposure to moisture can allow colonization to occur. With the potential health effects and detrimental degradation that could result in hosting materials and exposed structural elements, it is essential to get effective remediation work started immediately.

We have multiple members of our team certified through the IICRC as Applied Microbial Remediation Technicians, giving every customer experienced technicians and professionals to address the mold colonization in their homes, businesses, vehicles, and other areas where growth could occur. We can even work to reduce the presence of moisture for the future through the use of equipment like the hygrometer and thermal imagery for moisture detection and monitoring during necessary drying efforts.

No matter where mold grows in a property from Bridgewater to Easton, our dedicated SERVPRO team can make these effects Like it never even happened.

Microscopic mold spores exist almost everywhere, outdoors and indoors, making it impossible to remove all mold from a home or business. Some restoration businesses advertise mold removal and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:

Mold spreads quickly, so a minor mold infestation can quickly escalate into a major problem. Were dedicated to responding immediately when you contact us. A fast response lessens the damage, limits further damage, and reduces cost.

Learn More

We specialize in water and mold damage restoration, with advance training in restoration techniques and the experience and specialized equipment to quickly restore your property.

Learn More

We invest in the latest equipment and ongoing mold remediation training because it helps us restore your home or business quickly and effectively. We will isolate the affected area using physical barriers and a negative air pressure chamber.

Learn More

Every mold damage scenario is different, and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our typical process:

With sensational news stories and misleading advertising, you can easily understand why so many people are misinformed about indoor mold. Learn the facts about mold and the mold remediation process.

SERVPRO of The Bridgewaters is locally owned and operatedso we live and work here too and are proud to be part of this community. We are proud to provide mold remediation services in our local communities:

We are proud to serve our local communities:

Read more:
Bridgewater, MA Mold Removal and Mold Remediation ...

Vinegar is a bold mold killer. According to ServiceMaster Restoration and Cleaning, the mild acid in vinegar kills about 82% of known molds and can help prevent future outbreaks.

You can clean small amounts of mold with vinegar yourself, but know when to call professionals. Besides a crisis, such as a flooded home, the Environmental Protection Agency (EPA) advises hiring professionals when the moldy patch covers about 10 square feet or larger.

In this video, learn more about mold remediation from out senior editor, Brad Holden.

Vinegar truly is better than bleach at killing mold. The EPA does not recommend using bleach to kill or remove mold, except in special circumstances. In most cases, a background level of mold spores will remain after the application of bleach.

Bleach only kills surface mold, not the membrane underneath, according to ServiceMaster. That means the mold will grow back. In fact, recognizing the bleach as a threat, the mold will grow back even stronger. When bleach is used on porous surfaces like drywall or wood, mold membranes will move deeper into the surface to avoid the chemical.

First, save the apple cider vinegar for salad dressing. To clean mold, use regular white distilled vinegar, typically sold with five percent acidity. You can also use cleaning vinegar with its six percent acidity. Both are effective at killing mold. Generic brands are as effective as name brands. Cleaning vinegar is sold online and at many home improvement, discount and grocery stores.

Depending on the amount of mold, let the vinegar sit on the mold at least 60 minutes before wiping or scrubbing.

To safely and effectively clean a small area of mold, ServiceMaster advises the following:

To protect yourself from mold and its spores, wear gloves, a mask and goggles. Gloves also prevent any skin irritation from the vinegar.

Because of vinegars acidity, it can damage some surfaces. We dont recommended using vinegar on natural stone, waxed wood, cast iron or aluminum.

Here is the original post:
What to Know About Cleaning Mold with Vinegar

1. Call MoldRemediation.io

Mold Remediation connects homeowners and businesses with the best certified local remediation companies in their area. Our partners understand the science behind mold growth, cleanup, remediation and removal. Mold Remediations partners have the training and expertise to address any type of mold issue you may be confronted with.

Mold inspections and assessments are the first step of mold remediation. Properties are searched meticulously for any visible signs of mold. Air samples are also taken by remediation experts to determine the type and toxicity of the mold. These samples show what the spore count is, which is an indicating factor for level of contamination. Depending on the type and extent of the mold problem, experts put together a plan on how to stop outbreak.

Securing, sealing and containing areas with mold prevents the spread into any other areas. There are a number of ways to contain mold. Certain containment areas include physical barriers with negative air chambers and air pressure. All fans, air conditioners and heaters in the subject property are simultaneously turned off. This prevents mold spores from moving around, which stops the mold from growing and multiplying.

Negative air machines with high efficiency particulate air filtration (HEPA) are sealed to an opening in the containment area to allow proper ventilation and filtration. As a result, mold spores and other contaminants are unable to escape and affect other parts of the building during cleanup. Once the air filter is properly secured to the contentment area, we are ready for the next step mold cleanup.

The cleanup process involves removing the mold problem while limiting exposure. The method of cleanup depends on the extent of the problem and where the mold is growing. Protective equipment should always be worn to protect ones eyes, mouth, skin and nose. All non-porous materials and surfaces are cleaned. Level 1 mold is typically cleaned using a damp cloth or mop with a detergent solution, whereas Level 2 requires a HEPA vacuum to be used on all surfaces prior to cleaning with a damp cloth or mop with detergent.The mold and residue is then disposed of using a double-bag and tie closed.

Download the CDCs infographic: 8 Tips to Cleanup Mold

Once mold remediation is complete the sanitization process begins. Sanitization involves natural and environmentally friendly techniques to bring the indoor air quality back to normal levels, while also deodorizing materials and belongings. MoldRemediation.io supports the protection of the environment and the health of the occupants by recommending and providing natural and holistic solutions during sanitation.

See more here:
Mold Remediation