Polygon Light Tiles review The Gadgeteer – The Gadgeteer

REVIEW One of the bedrooms in our house needs to serve two purposes: For most of the year its my office, but when the kids come back for the holidays its a bedroom. Half of the room has my desk with my computers, and the other half needs a bed. I havent bought that bed just yet, but I plan to get something like a captains bed or a mini loft. Because the bed will be up against the wall, I wont have room for a traditional end table with a lamp, so Ive been looking for ideas for a light source that could be used when reading in bed. Thats when I found the Polygon light tiles.

Polygon light tiles are a set of modular, hexagon-shaped tiles that are designed to be creatively grouped together and attached to a wall. When touched, they light up; the more tiles that are touched, the brighter the light. Polygon is an American company based in New York City that focuses on creating unique, design-focused products.

Polygon was gracious enough to send me both their Starter Pack and an Expansion Pack, and they arrived in a pair of cylindrical-shaped boxes. The Starter Pack contains:

The Expansion Pack contains:

Together, these gave me 15 tiles to work with.

Each tile is in the shape of a polygon. The top half is white plastic, and the bottom half is a very light grey plastic. When the tile is lit, the entire top turns white; theres not a bezel around the edges. Each of the six sides has a magnet that holds it together with the next tile as well as a pair of metal pieces that conduct the electricity. They are a non-traditional source of lighting whose design is simple and practical.

There are three steps for installing the Polygon lights. First, pick any tile and plug it in to the power supply. Touch the top of the tile, and it will light up.

Second, place the tile on a flat surface, like a kitchen table, and begin connecting the other tiles. The magnets will hold the tiles next to each; if you happen to place two tiles together such that their magnets are repelling, simply rotate one of tiles. Right about now is when your creativity should begin to kick in. You realize that you can connect the tiles together in any way you want to make any shape you can imagine. The only requirement is that they all have to be touching. As you connect the tiles, use a sweeping motion with your hand to touch the tops of several tiles, and you will see them all light up. Sweep again, and they turn off. Its really quite cool to see the tiles work together.

Third, mount them on the wall. Polygon provides two mechanisms for mounting the tiles on the wall. One, there are pair of nail holes in the back of each tile that you could use with small nails or brads. Two, they have included a set of sticky pads (fancy double-sided tape) with each pack. I have read that these pads are really sticky and tend to pull paint off the wall if you attempt to take them down, so you might want to use command strips instead, especially if you think you might move the lights around. Whatever you prefer, mount the powered tile first, using a level to keep it straight (unless, of course, you have a very creative design that isnt supposed to be level), and make sure that the tile is rotated to allow the power supply cord to hang down. Keep in mind the length of the cordits about six feet longto ensure that it can reach a power outlet. Then one at a time connect the rest of the tiles. Polygon recommends that 70% of the tiles be mounted to the wall. When they are all mounted, plug in the power, and youre done!

Heres a picture of what we finally settled on. Im a Tolkien fan and am planning to decorate my office with a Middle Earth theme, so a sword seemed like a reasonable use of the tiles.

If you want to read the manual for yourself, you can find it in this PDF.

The lights are a warm white color, and they add a nice glow to the room. The surface is not a button; rather it has a capacitive sensor that responds to touch. In my testing, I found that it responded best when touched with several fingers or a palm; if I touched a tile with a single finger, sometimes it turned the tile on but sometimes not.

The lights are perfect for reading. I think they would be a natural fit to hang near the bed that I will add to my office, and they could also be used near a chair, a couch, or any place that you need some extra light at night. Since each tile lights up individuallyits not all or nothingyou essentially have a light that you can make as bright or as dim as you want. At this point, you might be tempted to react by asking, You mean, they are just lights? Yes, absolutely! Thats exactly the point! On their About page, Polygon says that they believe in products that are creative, beautiful, and functional. They are not just about a creative arrangement of tiles, they are intended to be a functional source of light for your room.

Speaking of being creative, you can arrange the tiles together any way you want. You can make simple lines or geometric shapes, though I think the neatest designs are those incorporate other elements on the wall, like this rain cloud or this hot air balloon. How cool is that! What creative ideas do you have? If you had 15 tiles, how would you arrange them? Id love to hear your ideas in the comments below.

When putting the tiles next to each other, you dont hook them together with clips or tape or anything. The magnets on each side attract the tiles together and keep them from moving around; the magnets are not, however, strong enough to hold them together on the wall. In other words, you cant mount one tile with a pair of nails and then expect the magnets to hold the remaining tiles in place. I believe that Polygons recommendation to mount 70% of the tiles is spot on.

If theres anything about the Polygon lights that would be a cause for concern, it would be the price. Five tiles with the power supply cost $112. Thats over $20 per tile. Ouch! If you bought the two packs that Polygon sent me for testing, that will set you back $248. Thats not cheap! If you just need some light, it would be cheaper to buy a couple of lamps. Polygon lights, however, are more than just lights: They are a blend of creativity, functionality, and interactivity, which is exactly what the Polygons founder, James Vanderpant, is looking to encourage.

While I think the lights are very cool as they are, if there was one thing I could add, it would be color. LEDs are capable of a wide range of colors, and it would be nice to have some way to change the color, thus setting a different ambiance in the room.

These lights dont have any extra features, but Polygon also sells cork tiles and plant tiles, which can be interspersed among the light tiles for extra creativity and variation.

Polygon lights are a modular lighting system that is both minimalistic and functional. The hexagon-shaped tiles be can hung on the wall in any shape or pattern, limited only by your creativity (and your budget). They provide varying amounts of warm white light, depending upon how many tiles you touch. I think they will be a wonderful light for my kids to read at night, once I am able to find the perfect bed for my office. If youre looking to add a creative light source to your room and have a little extra money, then I recommend splurging for these lights.

Price: $112 (Starter Pack), $136 (Expansion Pack)Where to buy: Polygons online storeSource: The sample for this review was provided by Polygon.

See the rest here:
Polygon Light Tiles review The Gadgeteer - The Gadgeteer