truck demolition derby tacoma dome jan 1991
truck derby in the tacoma dome 1991.

By: Joe Kowalski

See more here:
truck demolition derby tacoma dome jan 1991 - Video

Three of eight buildings at the former Princeton hospital have been razed during the first four weeks of demolition, a process that will last into 2015 before the site can be turned into a 280-unit residential development.

"Theyre making good progress," municipal engineer Robert V. Kiser said Wednesday of the demolition company Yannuzzi that developer AvalonBay has hired to clear the site. Work started Sept. 22.

He said five buildings remain to be taken down, including the six and seven-story buildings. Demolition of the taller buildings is expected to begin in two weeks, although it was not immediately known which of the two would come down first.

Crews are removing the "foam skin" of the taller buildings as part of preparation work to minimize the spread of dust, Mr. Kiser said. Overall, demolition of the site is expected to take six months "weather permitting," the town has said.

Blasting is not being used to take the buildings down but rather heavy equipment with large claws attached at the end. The town has said that municipal departments including the building, engineering and health departments have been monitoring the site on a "regular basis." The town also has an environmental consultant firm, Whitman, monitoring things too.

To minimize noise, temporary sound wall and sound blankets have been used.

In the update, the town said the municipal Health Department "is working alongside the Mercer County Division of Public Health to provide additional noise monitoring."

Continue reading here:
PRINCETON: Demolition progressing at hospital site

Granite Countertops Alabama
http://www.granitemakeover.com/granite-countertops/Alabama-granite.asp?s=Birmingham abrv=AL Discover Granite Countertops Alabama by Alabama Granite. Custom Granite Countertops Alabama.

By: Paul Gallagher

See the article here:
Granite Countertops Alabama - Video

How to Choose Suspended Ceiling Tile
Tim Chapel explains the benefits of suspended ceiling tiles, including basic, mid-range, and high-end tiles. Helping you choose the best tiles for your needs. Visit http://www.strictlyceilings.com/...

By: Tim Chapel

Read more from the original source:
How to Choose Suspended Ceiling Tile - Video

By Samara Lynn

Access points (APs) are to the business network what wireless routers are to the home network, adding Wi-Fi to a wired setup.There are differences of course; home routers are also generally the wired hub of your network, and access points offer far more in the way of security and network-management features. And multiple APs can be managed with a controller for centralized administration by IT. For those whose networks hew toward the no-frills side, EnGenius' EAP1750H 802.11ac 3x3 Dual Band Ceiling-Mount Wireless Access Point/WDS ($399) is speedy, if somewhat light on the enterprise features I've seen in other other APs.

Specs The EAP1750H looks like a flying saucer. It's designed to be mounted on the ceiling, and could easily be mistaken for a smoke alarm. In fact,EnGenius strives to make the device indistinguishable from other common office-building appliances.The AP ships with a T-Rail mounting kit, a ceiling wall mount and screw kit, and a mounting bracket. There's also a 12-volt power adapter, RJ-45 cable, and installation guide in the box.

You should have little problem finding a place to mount this AP, since it's fairly compact. It's 6.4 inches in diameter and 1.6 inches tall,weighing in at 9.6 ounces. On the housing are five LEDS for power, Wi-Fi Protected Setup (WPS) activity, wireless bands, and network status. There's also a pinhole reset button on the top cover.

Thedual-band AP supports the latest wireless standard, 802.11ac at up to 450Mbps on the 2.4GHz band and up to 1300Mbps at 5GHz. You won't see those theoretical speeds in a real-world office environment, of course, particularly with the many devices that are typically connected at the 2.4GHz frequency, but the EAP1750H is still quite fast, as I'll show below.

Setup and Management Interface To set up the AP, I configured a laptop's network adapter with the same subnet as the AP. Next, I connected the RJ-45 cable from the laptop's network port to the Ethernet port on the AP. Finally, I pointed a browser to the default IP address of the AP and launched the management interface.

The management UI is bare bones; it has no graphics of any kind, just text and dropdown menus for settings. From here, you can set the device to one of three modes. You can run it as an Access Point that creates a WLAN from an existing network (the most common usage). You can put it in WDS AP mode, allowing administrators to use it as part of a Wireless Distribution System to maximize wireless coverage with other APs. The third choice is WDS Bridge mode, which lets you connect two LANs, as long as they aren't too far apart.

I used the AP operating mode. I created a WLAN and enabled both the 2.4GHz and 5GHz bands. I noticed that for the 5GHz band, you can't set up 802.11ac-only mode. The only options are 802.11a/b, 802.11a-only, 802.11n-only, or 802.11ac/n. It isn't much of an issue, however, since many wireless clients still don't support 802.11ac. Chances are you're going to have at least some legacy hardware in your shop for years to come.

The EAP1750H has is a good mix of enterprise encryption options, including 802.1x RADIUS and WPA/WPA2 Enterprise, along with alot of common AP capabilities, including client isolation. When enabled, this disallows clients connected to the AP from communicating with one another for both security and performance reasons. Another common AP feature that the EAP1750Hpossesses is the ability to limit the number of clients that can connect to the network to prevent performance from getting bogged down.

You can also use this EnGenius AP to run a wireless scan for all other neighboring access points and use the information it returns to set the EAP1750H for use on channels that aren't packed with your neighbors' APs. This is a highly useful feature, but it's also a very common one, as are many of this AP's capabilities. It also includes VLAN support (needed for logically segmenting your wireless network for groups of users), SNMP compatibility, VPN pass-through, QoS, and MAC address filtering.

Read the original post:
EnGenius EAP1750H 802.11ac 3x3 Dual Band Ceiling-Mount Wireless Access Point/WDS

Direct Cleaners Home
Direct Cleaners are a professional Fine Rug, Hard Floor and Carpet cleaning company based in London Surrey. You can get a free 20 minute consultation, professional advise and written, ...

By: Direct Cleaners Ltd

Continue reading here:
Direct Cleaners Home - Video

6 ways to keep your carpet looking new

By KSL Local

October 31st, 2014 @ 2:07pm

You may not realize it, but your carpet likely takes center stage in your life. After all, its likely part of family parties, holiday celebrations, after-school snacks and chats, afternoon play dates and a host of other everyday events.

Despite the traffic it endures, carpet isnt one of those things you feel like replacing on regular basis. According to U.S. News and World Report, your carpet should last you eight to 10 years. But you can keep your carpet looking newer longer maybe even beyond that decade mark by taking some special care.

Sure, youre going to pull out the vacuum after a popcorn-stringing party with the kids. But just because your carpet looks clean doesnt mean there arent crumbs, dirt and other particles hiding in the plush.

When you let these linger, they can damage fibers and dull the look of your carpet, making it appear older than it is and who wants that? To keep your carpet looking newer, vacuum all carpet at least once a week twice a week for high-traffic areas like hallways and family rooms.

If youve been itching to make your carpet smell like a bed of roses, resist the urge. Common odor-eliminating carpet powders, which often include perfumes and chemicals, can leave harmful residues in your carpet. This residue can attract dust and dirt, encouraging a damaging buildup. The best way to eliminate odors in a carpet is to have them cleaned regularly.

While you may think youre pretty handy with that shampooer, a professional carpet cleaning is really the best way to keep your carpets soft, beautiful and new-looking.

Dont wait until your carpet is stained, dirty and unsightly, though. Your carpet should be professionally treated every six to 12 months, according to Angies List. This is true even if your carpet doesnt appear dirty. A professional cleaning can help prevent crushing of the carpet pile, which happens naturally as carpet is used.

See the original post here:
6 ways to keep your carpet looking new

Air Duct Cleaning Los Angeles | 213-271-9181 | Air Duct Cleanup
http://www.airduct-cleaning-losangeles.com Air duct contractor delivering the duct cleaning needs of clients in Los Angeles, California. Ensures topnotch ser...

By: David Grossman

View post:
Air Duct Cleaning Los Angeles | 213-271-9181 | Air Duct Cleanup - Video

Air Duct Cleaning Malibu | 310-359-6361 | Dryer Vent Repair
http://www.airductcleaning-malibu.com Offering air duct cleaning service packages superlative over other air duct companies. Services include cleaning vents,...

By: David Grossman

Follow this link:
Air Duct Cleaning Malibu | 310-359-6361 | Dryer Vent Repair - Video

Air Duct Cleaning Marina del Rey | 310-359-6370 | Vent Cleaning
http://www.airductcleaningmarinadelrey.com Air duct cleaning company located in Marina Del Rey, California. Offers 24/7 assistance in cleaning a dryer vent f...

By: David Grossman

Visit link:
Air Duct Cleaning Marina del Rey | 310-359-6370 | Vent Cleaning - Video