One of the best, and easiest ways to increase the book value of your home, is to have new carpeting installed, before you move ahead, youll have to figure out the carpet installation cost of your job.

The two biggest factors that come into play when determining your specific, carpet installation cost, is both the type of carpet you choose, and the retailer/installer you choose for the purchasing and installing of your carpets.

You have two main options when having new carpets installed:

The second option is the most cost effective as the carpet retailers usually charge a pretty hefty markup for installation.

When youre choosing a carpet installation contractor, youll want to make sure the pricing is laid out with no hidden costs so you dont run into any surprises when it comes time to write the check.

The installation of carpeting will require more than just installing the old flooring or carpet thats being replaced will have to be removed which will induce extra labor and fees. If the company you choose does charge extra to have the previous flooring removed, you can save a few bucks by doing it yourself with the help of friends or family, or you can expect to pay roughly:

Another carpet installation cost that is often overlooked by customers, is the sub-carpet, foam padding. In most cases carpeting does not sit directly on your wood flooring, instead, theres a foam pad that lies between the carpet and your floor; padding is not free, so make sure its included in your carpet installation cost.

Now that youre equipped with the basic knowledge, you can hunt down your installation contractor. All you have to do is have the contractor come to your home and take the measurements for your rooms. The contractor will give you the room measurements at which time youll go pick out and order the carpeting you want.

Once you have all of the carpeting materials, youll schedule a time for your contractor to come back and do the work- thats it. With this, you should be able to get a pretty good idea of what your carpet installation cost will be, before you even pick up the phone!

Continue reading here:
carpetinstallationcost.net - Carpet Installation Cost, Carpet Prices

home section Interior Design Housekeeping Entertaining Home Improvement Gardening & Plants Landscaping eHow Home & Garden Home Repair & Maintenance Carpentry How to Install a Carpet

Viktoria Carrella

Viktoria Carella has been a full-time freelance writer for seven years and writes mainly on health topics along with other topics such as home improvement, SEO and more. Carella has been writing for Demand Studios for several months and has been published in her neighborhood newspaper on several occasions.

Homeowners usually want professionals to install carpet, but some homeowners want to avoid the high cost of hiring someone. Many do-it-yourselfers find out carpet installation isn't as difficult as the professionals make it seem. If you have good leg and arm strength and can read a tape measure, you can install carpet.

Measure the dimensions of the room you will be carpeting with your ruler or tape measure. Lay the carpet down in a room larger than the one you will be laying the carpet in, or outside. Cut the carpet, with the carpet cutting tool, to the dimensions of the room.

Nail down fastening strips, starting in the corner. Nail the strips along the edge of the floor about 1/4 inch from the wall with the teeth towards the wall. Do this around the entire room. Nail the metal door edgings across the doorway with the open side pointing inside the room and with the teeth pointing out of the room.

Unroll the padding across the room you are carpeting, with the waffle side up. Cut this with a carpet cutting tool; overlap the fastening strips 2 inches along the entire wall. Use the staple gun and heavy duty staples to staple the padding into place, attaching a staple about every 6 inches. When all padding is in place, cut the padding where it meets the inner edge of the fastening strips only.

Unroll the carpet over the padding and pull into position, making sure the carpet overlaps the fastening strips. Slit the carpet at the corners, but do not cut past the overlap into the main carpeted area.

Put on the knee pads. Attach carpet to the fastening strips using the knee kicker. Start in a corner and put the head of the kicker on the carpet about an inch from the wall and aim it down at an angle to the wall. Kneel on the floor in the corner and hold the handle of the kicker with your right hand while using the left hand to hold yourself upright on the floor. Put as much of your weight as possible on the right arm and shove the left knee into the kicker to push the carpet and stretch it into place. Hook the carpet into the teeth of the fastening strips. Do this around the entire room.

Go around the edge of the carpet with a putty knife to push down any hanging threads of the carpet to finish off your carpet edges.

See the rest here:
How to Install a Carpet | eHow

Summary

Carpet installers use a variety of tools to make sure carpet is installed properly.

Carpet installers lay carpet in homes, offices, restaurants, and many other types of buildings.

Carpet installers spend a lot of time bending and kneeling. Although their work is not as dangerous as that of some other construction trades, carpet installers still experience a high rate of injuries and illnesses.

The vast majority of carpet installers learn their trade on the job.

The median annual wage of carpet installers was $36,090 in May 2010.

Employment of carpet installers is projected to grow 10 percent from 2010 to 2020, about as fast as the average for all occupations. Job prospects should improve in the coming decade as construction activity rebounds from the recent recession.

Compare the job duties, education, job growth, and pay of carpet installers with similar occupations.

O*NET provides comprehensive information on key characteristics of workers and occupations.

Learn more about carpet installers by contacting these additional resources.

Read more here:
Carpet Installers : Occupational Outlook Handbook : U.S. Bureau of ...

Theres nothing like running your hands over new carpet or seeing the transformation of a room where carpet has just been installed. Once youve chosen your new carpet, moving from inspiration to installation can be exciting and seamless when you know what to ask and expect. Here are tips and information to give you the best experience possible:

Will the installers move the furniture in the room, or am I responsible for moving my furniture? Who's responsible for getting rid of the old carpet? Can it be recycled? If the installers dispose of the carpet, are there any fees involved? Where will the carpet seams be placed?

Avoid airborne dust or particles by vacuuming the old carpet. Complete all other remodeling projects before installing your new carpet, including all painting, wallpapering and construction. The carpet installation should be last. Keep the roll of carpet at room temperature.

Vacuum after the old carpet and padding have been removed. Inspect the carpet to make sure the color, texture and style are as expected. Make sure the installers stretch the carpet to minimize wrinkles and ripples. Arrange to have any doors that wont open trimmed and rehung. Vacuum again after installation, and ventilate for 48 to 72 hours. Finally, sit back and enjoy your new carpet.

Tools, products, materials, techniques, building codes and local regulations change; therefore, Lowe's assumes no liability for omissions, errors or the outcome of any project. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed professional if in doubt about any procedures. Please read our terms of use.

More:
Carpet Installation - Lowe's

Installing wall to wall carpet isn't rocket science, and by using some specialized tools (available at most tool rental outlets) and being prepared to take your time, installing carpet is a job you can do yourself.

Your first step is to get rid of the old carpet. Start by removing the moldings around the floor and take the door off the entrance, so you can get the old carpet out and the new carpet in easier. Give the old carpet a good vacuuming so you won't be breathing in dust, and then use a utility knife to cut the carpet into strips about 18 to 24 inches wide.

Start at one end and pull the carpet off the tackless strips and roll it up in sections. Some people feel that you can reuse the existing underlay, but in most cases it will be worn out just like the carpet, so you're better off getting rid of it as well.

Remove the existing tackless strips and make sure the floor is clean and dry. This is a good time to check your subfloor and securely fasten any floorboards that may be loose so they won't squeak under the new carpet (use 1 1/2-inch screws into the underlying floor joists).

Install new tackless strips around the perimeter of the room, but not in front of doorways. Leave a space of about 1/2-inch between the strips and the wall, and be sure the pins or tacks face towards the wall. (They're called tackless strips even though they have two or three rows or very sharp tacks, because using these "tackless strips" means you don't need to "tack" carpet down.) At corners, make sure the tackless strips are butted tightly against each other.

Step 2 - Lay the Underpad

Put the underpad down in strips that overlap the tackless strips. Butt the strips against each other--don't overlap them--then staple the underlay down along the inside edge of the tackless strip. Trim the excess underlay along the inside of the tackless strip and use duct tape to seal the seams.

A wall to wall carpet will shrink and expand with changes in temperature and air pressure. If you bring a carpet in from outside and install it right away, as the carpet adjusts to the conditions inside your home it will stretch and shrink away from the tackless strips, or it will expand toward the walls and wrikle and buckle in the middle. To prevent this, allow the new carpet to rest, uninstalled, in the room for at least 24 hours. It will adjust to your conditions and remain true to the dimensions you cut it to.

Step 4 - Measure and Cut the Carpet

To install carpet properly, you need to start with a piece that overlaps the edge of the floor by 4 to 6 inches. The overlay can then be trimmed so the carpet fits properly. To cut your first section, measure the room at its longest point and add 6 inches to that measurement. Mark the back of your carpet on both edges with that measurement and join the two marks with a chalk line. Fold the carpet over on itself, and using a straight edge and a sharp utility knife, cut through the backside of your carpet. Be sure to place a piece of scrap board underneath your cut line to protect the underlying carpet.

View original post here:
How to Install Carpet | DoItYourself.com - DIY Home Improvement ...

Upgrade the appearance of your home by installing carpet

Let the professionals at The Home Depot handle your carpet installation or carpet replacement. Your carpet installer will meet and work with you closely to assess the condition of your floors, professionally measure the project area and discuss your options.

From the removal and disposal of your old carpet, to laying your new carpet and padding, your installation team will make sure the job is done right, and to your satisfaction. This includes helping you select quality carpet padding to install under your carpet to help it last longer, feel softer, reduce noise and provide insulation. Plus they know the job isnt done until all the installation area is vacuumed and free of debris. Your carpet installers will also walk through a final inspection with you and discuss your carpets maintenance guidelines and warranty information. And with our lifetime carpet warranty on labor, your total carpet installation cost comes with a lowest total project price guarantee.

View Contractors License Numbers

View Terms and Service Information

Here is the original post:
Carpet Installation & Replacement by the Professionals at The Home ...

Carpet Fort Lauderdale (954) 785-9299 Carpet Installation Ft. Lauderdale
http://www.browardcarpetandwoodfloors.com Fort Lauderdale Carpet sales and installation (954) 785-9299 The biggest selection of Fort Lauderdale indoor outdoor carpet, wall to wall carpet...

By: Fort Lauderdale Carpet and Wood Floors

Read the rest here:
Carpet Fort Lauderdale (954) 785-9299 Carpet Installation Ft. Lauderdale - Video

Canvas Carpet Installation Customer Complaint Form Mobile App
http://www.gocanvas.com/mobile-forms-apps/13016-Carpet-Installation-Customer-Complaint-Form . This Carpet Installation Customer Complaint Form app can be completed in the field in the unfortunate...

By: YouTube Account

Read more from the original source:
Canvas Carpet Installation Customer Complaint Form Mobile App - Video

Commercial Carpet Installation | Industrial Carpet Installation - Chicago
http://www.allinservicegroup.com Carpet installation service can make any room feel more comfortable, fresh and stylish. Whether you are seeking to renovate your entire home, a room, or your...

By: Rick Ramos

See more here:
Commercial Carpet Installation | Industrial Carpet Installation - Chicago - Video

Carpet Installation in Conyers, Ga - Hardy #39;s Floor Covering - (770) 786-9245 Call today!
Hardy #39;s Floor Covering sells Carpet, Vinyl, Ceramic, Laminate Flooring, Hardwood Floors, VCT, and LVT. Call or come by today for a free in home estimate!

By: Alex Victorino

Read this article:
Carpet Installation in Conyers, Ga - Hardy's Floor Covering - (770) 786-9245 Call today! - Video