SafeRacks, is a fast growing, quality focused, highly responsive product line of overhead storage and organizational products.

Can I install SaferRacks into Metal Joists or Concrete Ceilings?Answer: NO!

SafeRacks are designed to be installed into wood joists only. If your ceiling is dry-walled, use a stud finder to locate the joists.

Before you begin, gather the required tools and components listed below and ensure all are accounted for.If any of the listed components in your packaging are missing, please call 877.655.3443 to have them sent directly to you.

Please read through the assembly instructions completely before proceeding to installation. Once you understand all of the installation steps, proceed with the installation.

(These instructions depict a 4'x8' size rack being installed; all size racks can be installed based on the same steps taken with different measurements depending on rack size)

Begin by installing your ceiling brackets (Figure 1).

Figure 1

Next, the vertical posts will fasten to the ceiling brackets (Figure 2).

Figure 2

Finally, the horizontal beams and center support will attach to the vertical posts; the decks are placed on the beams to complete your rack installation (Figure 3)

Figure 3

WARNING: This installation is intended for a wood framed home, if your home is steel framed, stop the installation and call 877.655.3443.

Figure 4 and 5

Figure 6

Option 1: If the ceiling bracket is being placed in the corner of the wall and ceiling, and 2 joists are not available for anchoring, you can install the lag bolts into the wall header if one is present (Figure 7).

Note: If this option is chosen, install the ceiling bracket 1 " from the wall, so that you can access the back of the bracket to install the nut and bolt for the vertical post in the next step (Figure 8).

Figure 7 and 8

Option 2: If the vertical posts are centered on a wall stud, you can screw the vertical post directly to the wall stud. Use 3 washers total per lag screw, 2 against the wall and 1 on the head of the lag screw (Figure 9).

Note: If this option is chosen, install the lag screws loosely at first to ensure room for assembling the rest of the rack and leaving room for the wire decking which sits over the lip of the rack.

Figure 9

Figure 10

Figure 11

Figure 12 and 13

Note:

IMPORTANT: Ensure the skinny sections of the teardrop holes are facing down, and that all vertical posts are adjusted to the exact same length (Figure 14).

Figure 14

Notes:

Our ceiling brackets are intended to be installed with a minimum of two Lag Screws. Please refer to the figures below for the correct way of positioning the vertical posts on the ceiling bracket.

Figure 15 and 16

Figure 17 and 18

Figure 19 and 20

WARNING: Opposite ends may come loose when hammering beams in place. Use a helper to ensure rivets do not come loose during the seating process.

Figure 21

Figure 22

NOTE:

Figure 23

Figure 24

Figure 25 and 26

Figure 27

WARNING: Load heavy objects, distributed equally, nearest the vertical posts and light objects nearest the center. Read the safety label on the rack and do not overload the system. Do not climb on or hang from the storage rack. Routinely inspect the rack over time to ensure rivets and wire decking units are seated properly.

WARNING, DO NOT EXCEED THE FOLLOWING WEIGHT LIMITS

All stated weight limits are based on static loads with load distribution as stated above. Some horizontal deflection can be expected when racks are loaded near maximum limits.

REFER TO THE WARNING PAGE ON INSIDE COVER OF THIS MANUAL FOR ADDITIONAL INFORMATION.

Figure 28 and 29

Figure 30

Figure 31

Figure 32

Figure 33

Figure 34

Figure 35

Figure 36

Continued here:
Installation Instructions - Ceiling & Hanging Garage Storage

Ceiling Fan Installation Cost

According to almost 7,000 surveyed homeowners, the cost to install a ceiling fan averages $244, or between $143 and $352. Either an electrician or handyman can install the fan, but this will depend on the electrical capacity of its placement.

Nothing is better for cooling you down, increasing air circulation, removing stale cooking smells or even distributing heat than a ceiling fan. You can have anew ceiling fan installed or replace an old one fairly simply and at a reasonable price. Here are a few things that may affect the cost of installing a ceiling fan

There are ceiling fans in every possible style from traditional carved oak to slick stainless steel, to fans that resemble the propellers of old airplanes. No matter what your style there is a ceiling fan made to match. The first thing to consider when choosing a ceiling fan is how much prominence you want it to have in the room. If you have a small room, a large fan will become a focal point. But If you have 16 foot ceilings, the fan will be much less noticeable. If you want your ceiling fan to match your home's decor consider choosing colors that will compliment the room colors, wood tones that will match existing wood trims or a similar style (modern, country, etc.). Which ceiling fan you choose will affect the price of the project of course. There are as many prices for ceiling fans as there are fans to choose from, so choose one that fits your style and budget.

Ceiling fans are designed to evenly distribute air in a room, so the size of your room can dictate the size of the fan. In very large rooms, you may consider more than one fan. The larger the fan motor, the more expensive it may be. However, if you choose a smaller fan, or choose to use one fan rather than two in a very large room to save on costs, this might end up not giving you the fan power that you need. So weigh your costs against the functionality that you want before making a decision.

Ceiling fans need about the same amount of power as most light fixtures, so be careful that your electrical circuit doesn't get overloaded. If the fan includes a light fixture, make sure ahead of time that the circuit is able to handle both the fan and light. If your circuit will not hold this capacitythen a new circuit must be run from the home's main panel to the fan. So there may be costs incurred with the installation of a ceiling fan for both installing a new circuit, and for increases to your electrical bill.

Although some ceiling fans have exposed cords that can be plugged into wall sockets, the preferable installation is for the fan to be wired into the ceiling like a light fixture. If there was an existing fan or light fixture already in the room, the installation is reasonably simple using the existing wires. However, if there was not a preexisting fixture, you will need to create a place to hang the fan. Of course, it is easiest to install ceiling bracing and electrical wiring during new home construction even if you will be installing a fan at a later time. But if you want to place a fan in a new location in your home, new wiring must be run to the new location.Consult an electrician about the costs for wiring the new ceiling fan or for using the existing wires.

The rest is here:
2018 Ceiling Fan Installation Costs | Indoor & Outdoor

Trust Lowe's With Your Lighting or Ceiling Fan Installation

Illuminate your home with our selection of pendant lights, chandeliers, wall lighting and more. Craving more cool? We have ceiling fans to suit any space.

Ready for New Lighting or Ceiling Fans?

Submit the form below or call 1-877-GO-LOWES to get connected with a Lowe's associate.

POPULAR LIGHTING CATEGORIES

SHOP CEILING FANS BY ROOM SIZE

Lowes Can Help With Your Lighting and Ceiling Fan Installation

Wondering how to install a ceiling fan or how to install outdoor lighting? Now you can get ceiling fan installation help and lighting installation help from trusted independent installers in your area. Jobs like recessed lighting installation and installing a ceiling fan can be demanding. Estimate ceiling fan installation costs and recessed lighting installation costs to help make better decisions. When it comes to installing ceiling fans, the cost to install a ceiling fan depends on the area. So forget learning how to install ceiling fans and let professional installers help install a ceiling fan or lighting for you today.

View post:
Lighting & Ceiling Fan Installation from Lowe's

With ceiling fans strategically located in rooms of your home where you spend a lot of time, or even covered outdoor areas, you can turn the thermostat up to save money without sacrificing comfort.

When it comes to installation that requires knowledge about electrical wiring, it's best to leave it up to the pros. Angie's List members who had similar jobs done in 2013 reported paying an average of approximately $200, not counting discounts many service providers offer. Electrical contractors generally charge $30 to $70 an hour, depending on location, training and experience.

If you're installing a fan in an area that doesn't have existing electrical wiring, expect the cost of the job to be higher. That's because the electrician will have to break through walls, floors and/or ceilings to run new wiring to power the fan. Using an expert, even for installation jobs that take advantage of existing wiring, also ensures the fan will be properly balanced, secured to the ceiling joists and wired safely.

For projects that utilize existing wiring, the costs goes down dramatically. In general, the average cost to install a ceiling fan may also include the installation of a wall switch to turn the fan on and off. Some homeowners may choose to circumvent the wall switch installation and turn the fan on and off via a pull-chain.

Excerpt from:
How Much Does Ceiling Fan Installation Cost? | Angie's List

Ceiling fan performance and energy savings rely heavily on the proper installation and use of the ceiling fan. Here are a few tips to ensure quality and product performance.

Note: consumers should read and understand manufacturer instructions before attempting to install a ceiling fan.

Make sure that you use the appropriate UL-listed metal box, marked For Use With Ceiling Fans. This outlet box is mounted above the ceiling and also is the point where the fan is attached. This box houses all wiring needed to operate and connect the ceiling fan. If you are replacing a ceiling fixture, most likely you will need to replace the electrical box.

If possible, the ceiling fan should be anchored to a ceiling joist. In the case that the joist is not located in the center of the room, a special ceiling fan mounting bracket with spiked ends should be installed between joists. Keep in mind that ceiling fans can weigh as much as 50 pounds!

All fan blades should be balanced prior to shipment; however, if the fan is wobbly after installation, there are ways to fix it. First, make sure that all connections are properly aligned and tightly fastened. Check the alignment of the blades by holding a yardstick vertically along the edges; you may be able to gently bend a misaligned blade holder back into proper place. If all blades are aligned, a balancing kit can then be used to pinpoint the culprit. These kits are either provided within product packaging (e.g., balancing clips and blade weights) or can be sent by the manufacturer free of charge. View a video with tips on fixing a wobbly fan.

Ceiling fans cool people, not rooms. If the room is unoccupied, turn off the ceiling fan to save energy.

In the summer, use the ceiling fan in the counterclockwise direction. While standing directly under the ceiling fan you should feel a cool breeze. The airflow produced creates a wind-chill effect, making you "feel" cooler. In the winter, reverse the motor and operate the ceiling fan at low speed in the clockwise direction. This produces a gentle updraft, which forces warm air near the ceiling down into the occupied space. Remember to adjust your thermostat when using your ceiling fan additional energy and dollar savings could be realized with this simple step!

Follow this link:
Efficient Ceiling Fan Directions | ENERGY STAR

On This Page:

While it may go unnoticed, every room in a house needs a ceiling for functional as well as aesthetic reasons. Although the most important thing is that the ceiling helps keep you warm and dry, its design can completely alter the look and feel of a room. In addition, whether adding custom ceilings as a remodel project or including different options in a new home build, paying attention to how different types of ceilings physically impact each space is important. From cost-effective, classic choices that go largely unnoticed to special designs that are great at hiding wires, maximizing acoustics, and adding artistic flair, the effects that a room's ceiling has are far greater than just protecting your head.

However, this job only seems complicated and expensive. In fact, hanging a ceiling is just a bit more difficult than hanging drywall. On average, homeowners pay $1,562 for ceiling installation. However, while this number includes various job types and sizes, considering the type and the extent of the work needed to complete it is essential when it comes to predicting the cost of this home improvement project.

The type of ceiling desired or required in a particular room is the most important factor when it comes to the overall cost of installation. However, more artistic and functional styles add more value, both real and perceived to a home. That is why it is important to pay attention to the pros and cons, functionality, and cost of each of the most popular types.

Return to Top

Standard, smooth drywall ceilings are the easiest to install as well as the most common and preferred type, appropriate for all rooms of a home. They also generally have the lowest installation costs, ranging from around $1.60-$2.13 per square foot of installation. The most prominent factor affecting drywall installation costs is the bulk of the materials, which require several workers to safely maneuver and hang. The thickness of the drywall is also a factor.

Aesthetically, drywall ceilings do not offer much in the way of visual interest. They can be painted just like the walls of a home, but they are also subject to peeling and cracking with age, which eventually necessitates repairs.

Return to Top

Common in businesses and additions, drop ceilings offer homeowners a less-expensive option perfect for large spaces like finished basements. In addition, the removable tiles make hiding wires and accessing pipes, air ducts, and the floor above easier and more convenient.

Generally about half as expensive as standard drywall, drop ceilings are lighter in weight and can be installed by a single contractor. They offer little in terms of aesthetics, but their functionality makes them a wise choice for a project with a tighter budget.

Return to Top

Adding a vaulted ceiling to a new build or remodel is one of the most expensive add-ons that homeowners can choose. It is not uncommon for a raised ceiling project to cost upwards of $25,000 on a remodel and several thousand for a new build. However, the effects of raising a standard 8-foot ceiling to 10-12 feet are quite dramatic in terms of both aesthetics as well as overall home value. It is estimated that they add up to 25 percent onto the value of a home, particularly in older, smaller homes.

Aesthetically, vaulted ceilings add depth and light to a room and create the illusion of space, which is a great way to add an expansive feeling to an existing build that lacks room on its lot for an addition. In higher-end homes, they are the type of upgrade that is expected, however.

Return to Top

Popular in homes built between the late 1930s and early 1990s, popcorn ceilings have largely fallen out of favor for both aesthetic and health reasons in the 21st century. In fact, removal is more popular than installation, particularly in homes built prior to 1977, because it was not until then that the EPA banned the use of asbestos in textured ceiling paint.

These days, the installation of popcorn ceilings, also known as acoustic ceilings or textured ceilings, is decidedly safer but far less popular. When they are installed, they do provide some benefits because their textured finish conceals imperfections, covering up a botched drywall or mudding job. Priced at approximately $1.10-$1.37 per square foot, textured ceilings offer a more affordable finishing option than traditional drywall.

Return to Top

Providing both texture and architectural elements, the coffered ceiling blends the benefits of vaulted and popcorn ceilings to offer homeowners a more affordable and aesthetically pleasing option. These are essentially a series of crossed beams or panels that are customized to each space. It is easy to personalize the look of a coffered ceiling to reflect individual aesthetic tastes as well as a room's decor through different wood types, finishes, and paint colors or effects.

At a cost of approximately $25 per square foot, coffered ceilings cost more than traditional drywall but also add value to a home by giving it an upscale, customized look.

Return to Top

Whether added during remodeling or integrated as part of your build, the rustic look of beams adds character, texture, and interest to any room. To achieve beam ceilings, most homeowners add timber to an existing room or expose the support beams of a home. This facilitates a variety of designs and personalization options, including the type of wood and finish, which homeowners can coordinate with the rest of their home or room's decor.

Beam ceiling costs vary according to the type the homeowners choose, whether natural or aesthetic, as well as the type of wood they use for the beams and the overall number and length of those beams. Because of these factors, installation prices can range from a few hundred to a few thousand dollars.

Return to Top

The most significant factor affecting the price of any type of ceiling installation is the size of the room, because more space means more time and materials are needed to complete a project. However, in the case of drywall projects, the inverse may actually be the case. Many general contractors actually charge more per square foot for small drywall projects because of the hassle of transporting the drywall and other materials needed. For this reason, adding on to a drywall ceiling and including several rooms or other drywall projects along with a ceiling installation may actually save homeowners money than if each project were done independently.

Return to Top

See the original post:
2018 Ceiling Installation Costs | Drop & Drywall

Edit Article

Installing ceiling drywall is a very simple process, but can be slightly challenging when working alone. By making a few minor adjustments, almost anyone can accomplish this task on their own. Here are a few steps to help you along as you learn how to install ceiling drywall.

1

Inspect the area for any obstructions, such as electrical wires, ductwork, or protruding pipes. Install furring strips to the framing in order to create a flat, even surface for drywall installation around these obstacles.

2

Mark the wall studs to indicate the locations of the ceiling joists for reference during the installation process. You'll also want to mark the placement of light fixtures and electrical boxes.

3

Build a T-Brace, if necessary. This will provide the leverage and support needed to raise the drywall panels to the ceiling when you're working alone. Use a 2 foot (60.96 cm) piece of 1 by 4 (2.54 by 10.16 cm) and nail it to a 2 by 4 (5.08 by 10.16 cm) that is long enough to be 1 foot (30.48 cm) higher than the length from the floor to the ceiling.

4

Hang the drywall, starting in the corner, where you can use a full sheet. Raise the first sheet to the ceiling so you can get an idea of the placement across the joists.

5

Wait until you know where you're placing each sheet before you apply any adhesive to the joists. Drywall adhesive dries within 15 minutes, so you'll want to be ready.

6

Using your T-brace, or a friend to assist you, raise the first sheet of drywall to the ceiling and slide it snugly into the corner. Make sure that the tapered edges of the sheet are facing the floor.

7

Continue along the first wall, always ensuring that the tapered edges abut one another and are facing down. The tapered edges are designed to make the process of taping and mudding easier.

8

Affix the drywall sheets permanently to the ceiling joists using either nails or screws. The heads of the fasteners you choose should come in contact with the paper facing, sinking in slightly without breaking through the paper.

9

Drive the fasteners in 3/8 inches (0.95 cm) away from the edges of each sheet, and space them 7 inches (17.78 cm) apart along the perimeter. Along the interior joist, install the fasteners at about 12 inch (30.48 cm) increments.

10

Start the second row with a half sheet of drywall in order to stagger the seams. This will enforce the stability.

11

Measure and mark the cut line at the vertical midpoint of the drywall sheet. Use a straightedge to help guide your utility knife as you cut. Tip the panel off of the floor or table at a slight angle, then push it down to break it in half. Use the utility knife to cut through the paper backing.

12

Trim the dry wall's length by first marking the line with chalk. Score the line with the knife first, then cut deeper with the second pass.

13

Install panels over vents or light fixtures loosely at first. Use a rotary drill to cut out a border for the fixture or vent, and then fully attach the board.

14

Complete the entire ceiling installation before moving on to the walls.

How do I board out a ceiling that is ready for plaster board on a non-standard construction house?

wikiHow Contributor

You can rent or buy a support tool specifically designed for this purpose. Measure, cut, and then lay it on the support tool. It is adjustable and can hold the drywall at the proper height. Screw the drywall to the ceiling joists.

I'm trying to finish the basement ceiling because our contractor backed out after doing the walls first, so how do I make sure everything looks okay when walls are done but the ceiling isn't?

Most people believe that ceilings must be done first, but this isn't true. Doing a ceiling first only helps to hide edges and off cuts. Make sure that the wall board is completely screwed at the top . This will help to keep things straight. You have two option then. You can measure a center point to the middle of the ceiling, placing your sheet dead center of the line, though this isn't recommended if you're not a professional. It's easier to start from a straight corner placing a full sheet in opposite direction of the studs. Your second sheet should be at least 2 - 4 feet shorter than the first one. Place it on the second row. Complete your first row, then continue on until you're finished.

How do I drywall a ceiling that needs insulation?

wikiHow Contributor

Install friction fit batts, sized to meet the code requirements in your area; cover the area completely with 6 mil poly, taping all joints; then fasten up the drywall.

How do I attach drywall to a metal air vent?

wikiHow Contributor

You don't. Drywall should not be in direct contact with the heating duct. As the duct warms when hot air goes through it, the expansion of the duct will create an annoying noise, break loose the screws, or both. You need to frame below the duct to fasten the drywall to either wood or metal framing that is not attached to the duct.

What should the thickness of the drywall on the ceilings be?

wikiHow Contributor

1/2 in is standard, but the code in your area may require a different size, so check your area's building code to be sure.

How far should the screws go into the ceiling joists when installing a drywall ceiling over an existing one?

wikiHow Contributor

To the point where the head contacts the drywall, too far and you could damage the drywall.

Ask a Question

Thanks to all authors for creating a page that has been read 322,287 times.

YesNo

Read more:
How to Install Ceiling Drywall: 14 Steps (with Pictures ...

Inspect the existing junction box to make sure its rated for ceiling fans. There should be an inscription on the box to indicate this. The box is usually metal. If not, replace it with a fan-rated junction box and a fan brace between the ceiling joists to help support the fans weight. This process will be shown in Step 2.

Insert the fan brace through the hole in the sheetrock and onto the ceiling. The square tube of the brace should be centered with the hole. Rotate the square tube with your hand until the teeth are firmly locked into the joist. Feel around to gauge your results. Attach the U-bolt bracket to the fan brace. It should be centered in the hole with the bolts facing downward. Thread the cable wire into the junction box. Slip the box up so that the bolts slide through it and tighten the nuts to secure the box into place.

Thread the main wires through the center of the mounting bracket.If the fan has a slide-on bracket, you can leave the mounting bolts on the junction box and simply slide the fan bracket over the mounting screws. Tighten them securely.If your fan doesn't have the slide-on fan bracket, place the fan bracket over the mounting bolts that poke through the bracket and fasten it with the nuts provided.

Using a flat surface, slip the canopy onto the downrod and run the main wires through. Insert the clevis and cotter pins to the downrod, so that it connects to the fan's base.Attach the bulb-shape fitting at the top of the downrod to the mounting bracket on the ceiling.

Connect the fan wires to your household wiring. Some fans come with additional wires, so be sure to follow your owner's manual for specific instructions. Use the wire nuts supplied with your fan kit to secure the wires.Match up the wires: In many cases, the fan's copper or green insulated wire connects with the ground wire. The fan's motor black wire connects with the supply black wire. The fan's light kit wires, blue or striped, also connect with the supply black wires. The fan's motor white wire connects with the supply white, or neutral, wire.Once these wires are securely connected, push them into the junction box. Use wire cutters to cut the wires if they can't fit into the box. This will keep them from vibrating against the canopy when the fan is running. Clip the canopy onto the mounting bracket and tighten the screws.

Some fans have quick-install blades that can make the installation faster. Simply align the blade arm posts through the blade keyhole slots and slide them outward until they click and lock into place.For fans without quick-install blades, screw the fan blades onto the blade arms. The side of the blade that you want shown should face downward.Ceiling fans with accu-arm blade brackets can also speed up installation. These brackets come with the blade screws attached. Also, there's an alignment post on the bracket that will help in mounting the blade arm without stripping the mounting hole.For fans without the accu-arm feature, fasten the blade assembly to the motor with two screws. Drive the screws in slowly to avoid stripping and bending the blades, and tighten securely. Install the globe and light bulbs that may be included in your kit. Restore power, turn on the fan and enjoy the breeze!

Go here to see the original:
Installing Ceiling Fans at The Home Depot

The What: Vaddio has launched the new QuickCAT Universal Suspended Ceiling Camera Mount designed to install into a suspended ceiling and provide quick height adjustment.

The What Else: The QuickCAT mount incorporates a suspended ceiling plate, column system, mount, and universal interface for PTZ or fixed cameras, and leverages the mount design expertise of Chief, a fellow brand of Milestone AV Technologies. Packages are available with a customized OneLINK extension system to extend power, video, and control over a single Cat-5e/6 cable for up to 100 meters.

This aesthetically pleasing solution extends the cameras reach and hides the OneLINK EZIM module above the ceiling tiles, said Dan Hoffman, product manager, Vaddio. With the adjustable column, theres no need to specify several column sizes, so you save time on planning and installation.

The Bottom Line: The QucikCAT Universal Suspended Ceiling Camera Mount is designed to solve problems like inconsistent ceiling grid systems, adjustment, and cumbersome installation processes with a host of innovative features.

Read this article:
Vaddio Introduces QuickCAT Universal Suspended Ceiling Camera Mount - Audio Visual News Network

Facebook

Google+

Pinterest

LinkedIn

CEDIA is quickly approaching. Before the show, CE Pro caught up withMichael Benedetto, VP of sales, Kevro International and Monitor Audio, about what the company has in store for CEDIA attendees in San Diego next week, in booth #1120.

Monitor Audio has been building award winning loudspeakers for over 40 years. Our vast experience, research and development that go into our entire loudspeaker line trickles down to our vast array of architectural and custom products. We deliver outstanding performance at multiple price points, while delivering attractive programs and profit to our dealers.

Lets rediscover Monitor Audio. In the past year, we have made significant changes to our organization, marketing message and channel strategy. With these changes, along with our exciting new products, Monitor Audio is poised to be a brand to watch over the next several years.

I would say to them, stop by and say hello. Take a few minutes to explore our wide range of innovative products and solutions. You will see right away the detail in the fit and finish of our products; from our entry level in ceiling speakers all the way to our flagship in-walls.

The one thing that sets Monitor Audio apart from our closest competitors besides our signature sound, is the fact that we are not financed or owned by any venture capital firms or banks. The principals of Monitor Audio are very active in the day-to-day operations and product development. Our passion is in building award winning speakers and long-term partnerships rather than focusing on spreadsheets and share prices.

At Monitor Audio, we are all about change and trying new things. I think changing a venue is a good thing and hopefully it will bring new people from the industry to discover CEDIA for the first time.

Besides, how do you beat San Diego in September?

#cedia2017 #monitoraudio #monitoraudiousa #rediscoversound #rediscovermonitoraudio

We are in the process of developing in-depth training for our valued partners, not only to educate our dealers and channel about Monitor Audio, but to illustrate the wide-range of products and solutions for all types of applications.

Another important aspect of our training is to assist them in streamlining their product offerings to improve efficiency, increase market share, and most importantly improve their bottom line.

Read more here:
CEDIA Q&A: Kevro, Monitor Audio Highlight Platinum In-Ceiling II ... - CEPro