Home Builder Developer - Interior Renovation and Design

Window Cleaning Tanks to use in the back of the van wfp

By: Mark Munro

Read the original post:
Window Cleaning Tanks to use in the back of the van wfp - Video

New Bedford Ma Carpet And Rug Cleaning
Carpet and rug Cleaning new bedford ma carpet cleaners deagreaser5673 shampoo steamer and clean deodorizer stain removal pet treatment urine with enzyme upho...

By: Joao Varela

Excerpt from:
New Bedford Ma Carpet And Rug Cleaning - Video

Tyrone Towers, right, and Tom Beacom of Devlin and Plummer. Stained Glass, remove the stained glass from the main west window of Christ Church at Eaton for restoration and cleaning. Picture: Denise Bradley

Emma Knights Thursday, February 6, 2014 7:00 AM

For nearing a century the colourful west window has decorated Christ Church, in Eaton, and now the beautiful stained glass is part of a special restoration project.

To send a link to this page to a friend, you must be logged in.

The church communitys Be A Pane fundraising drive has raised 65,000 in just nine months to help restore the churchs windows to their former glory, and over the past couple of days the exquisite panes of the west window have been carefully removed so that they can be worked on by Great Moulton-based specialists Devlin Plummer Stained Glass Ltd.

It is the first time the glass has been taken out since the window was put in place in 1918 to celebrate the golden wedding anniversary of John Joseph Dawson Paul, of city-based manufacturer Boulton and Paul, and his wife Elizabeth.

John Brydon, who has been leading the Be A Pane Campaign, said it would be wonderful to see the west window restored as part of the project.

He said: The clear glass windows in the south aisle have already been taken out and restored, and that has made a big difference.

Now the west end window has been taken out and will hopefully be restored and back in place by Easter.

People through different generations have lavished care onto the church, so it is nice to sustain that love and care. We want to keep the windows there for future generations to enjoy.

Read more:
Video and photo gallery: Stained glass restoration project under way at Christ Church in Eaton

Taunton window cleaner impaled on railings after falling off ladder

9:00am Thursday 6th February 2014 in News

WINDOW cleaner Jon Richardson is nursing a sore foot after falling off a ladder and becoming impaled on railings.

But without his quick reactions he reckons the accident would have been far worse.

I fell 2 metres and was going down stomach-first with the spikes coming towards me, said Jon, aged 40.

But I got my foot out just in time, otherwise Id have had four spikes through my tummy and wouldnt be here today.

Jon was on the top rung and about to start cleaning an upstairs window in Grove Gate, Staplegrove, shortly before 10am on Saturday when the ladder slid from underneath him.

After he landed on the railings, with his body on the ground, Jon at first thought hed simply trapped his ankle.

I called for help and people came running out, said Jon, of Trendle Road, Taunton, who will be off work for six weeks.

They lifted my body up level with my feet, which is when I saw the spike had gone through my foot.

Continued here:
Taunton window cleaner impaled on railings after falling off ladder

S

That 60 gallon tank of hot water in your basement eats up a lot of energy. But tankless on-demand water heaters leave you running water down the drain while you wait for warmth. This tiny Kickstarter water heater promises to change all that, and save you money, thanks to some fascinating technology.

The team behind the Heatworks Model 1 says the foot-long device can deliver instantaneous hot water on demand, saving 40% on energy costs and 10% on wasted water compared to an electric tank-style heater. One unit supplies enough endless hot water for one shower at a time, while larger households could install a unit at every bathroom, saving money on hot water piping and cutting out minutes spent waiting for hot water to arrive.

The key is how the Model 1 heats the water. Unlike current tankless electric heaters, which use a corrosion- and failure-prone metal coil, Heatworks relies on submerged graphite electrodes that use the water around them as a resistor. This, they say, gives you instant heat, rather than the 30-second wait associated with other tankless systems.

Sure, this all sounds great, and with the Kickstarter already past goal, it looks like Heatworks will have the money they're seeking to start production. But being funded on Kickstarter is entirely different from producing a reliable product in quantity. Even if they make it, are you willing to trade the familiar water heater any plumber can fix in the middle of the night for a high-tech energy saver that runs on the future? It's a gamble, and a cold shower is the loser's lot. [Kickstarter]

Update: Prompted by a number of comments asking whether there's any risk of being electrocuted by this device, we reached out to Heatworks for clarification. Founder Jerry Callahan explained via email:

Yes, we pass currents through the water, but here is why no one should be concerned;

More:
This Football-Sized Device Could Replace Your Huge Water Heater

5:22 p.m.Feb. 5, 2014

There are two ways to quickly answer the call for more fresh water:

These can be done inexpensively and in many cases without significant permitting.

I reduced water use at home from about 400 gallons per day to 280 gallons per day, a 30 percent savings. For help, I called the city of San Diego Water Utilities Department. They sent out a technician who, at no cost, helped me find leaks, learn how to install a simple pump at the hot water heater to bring hot water more quickly to my faucet, thus wasting far less water waiting for cold to get hot, how to reduce outdoor irrigation by managing on-off days and run-times for my sprinklers.

This simple effort cost me a few dollars with the plumber. That was returned within a few months through lower water and sewer bills.

Even though the cities and county have been diligent about reducing urban runoff, it still exists. It can be injected into groundwater basins. It takes some negotiating with state and federal water quality agencies, but for the most part, they are interested, amenable and have excellent suggestions based on successes elsewhere in California and the nation.

An added benefit is the ability to deal more quickly and at far less cost with our chronic flood-control problems.

It is important not to overreach. If we stick to simple, inexpensive and practical solutions to our immediate freshwater problem, we will create more supply, almost overnight.

But if we continue to insist on new dams, on using nuclear power to create freshwater from the sea, and embark on energy-intensive flood control and groundwater management programs. we will fall far short.

It is time to do things that work, and work fast.

Original post:
Dry times

Putting solar panels on your roof will only take you so far. The trick is finding ways to use more of the electricity in your home and send less of it to the grid where you will likely be charged per kilowatt-hour for your share of upkeep.

It makes little sense to be anti-solar energy in this day and age, although it does make sense to do it right.Even solar can be done wrong. Usurping farmland, forest, or pristine desert tortoise habitats for solar should be against the rules.

Our mission is to provide clear, objective information about the important energy issues facing the world, address and correct misconceptions, and to actively engage readers and exchange ideas.For more great energy coverage, visitEnergy Trends Insider.

Subscribe Today to the Monitor

Click Here for your FREE 30 DAYS of The Christian Science Monitor Weekly Digital Edition

I was motivated to do this post by a rare, cloudless, 50 degree day in the dead of winter.

If you put grid-tied solar panels on your house to eliminate your electric bill, you may one day be billed for use of the grid anyway.Some solar panel owners are already paying about 25% for use of the grid. Thats because, like natural gas and coal, solar panels are essentially a source of energy (fuel) for an electrical grid,which is only one component of the total cost. Power grids are like roads and sewer lines in that we all have to pay our fair share for their use. Im OK paying an extra fee for my electric car which pays no gasoline taxes. Im also OK with temporary government subsidies to test the waters for new technologies.

Some percentage of most electric bills goes to pay the fuel costs at the power plant. In my neck of the woods almost98% of our power comes from hydro (90%), wind (4%), and nuclear (4%), which have no or very low fuel costs. Yet we stillpay roughly 9 cents per kWhfor residential electricity.The average American pays about 12 cents. The difference in cost (12 9 = 3 cents per kWh) is mostly fuel. The other 9 cents is what it costs to get the electricity to you, expand or maintain the grid infrastructure, pay for Federal programs, etc. This means that someone who offsets all of their electricity use with grid tied solar panels might one day, in theory, end up paying something like 75% of their original electricity bill (12 cents 3 cents for fuel costs = 9 cents = 75% of 12 cents).

However, if your highest priority is to use less fossil fuels (willing to spend more to accomplish that), then volunteering to pay more for your electricity isnt necessarily a bad thing, in fact, one could argue that its a noble thing. If wind, solar, and nuclear really do cost more than fossil fuels, maybe paying a little extra to get rid of fossil fuels isnt a bad idea.

One method to reduce the various monthly grid use charges beginning to show up on electric bills by owners of grid-tied solar panels (who are essentially very small power companies) is to find ways to use more of the electricity in your own home (send less of it to the grid where you will likely be charged per kWh for your share of upkeep).

Read more here:
How to use less fossil fuel at home

Over the last few weeks, mail carriers have swaddled themselves in layers, clutched hand-warmers and donned boots with at least 2 inches of tread.

They have walked flat-footed on the snow and ice, and even strapped on metal cleats.

In spite of extra precautions, local carriers have tumbled on icy sidewalks, and sprained their ankles or banged up their backs.

This winter's ongoing barrage of snow, ice and subzero temperatures has caused a range of delivery woes. Orders of pizza, flowers and subs often take longer than normal. Packages have been delayed or gone undelivered for at least a day after U.S. Postal Service carriers confronted stairways that were slicked with ice or so blanketed with snow they could not see where the first step was.

"Snow and ice make delivery dangerous and slow," Hammond Postmaster Harriett Sheppard said. "Maintaining a clear path to the mail box including steps, porches, walkways and street approach will help letter carriers maintain consistent delivery service and help them get letters and packages delivered on time."

Packages can get delayed when ice-slicked highways are shut down and lake-effect snow prompts authorities to issue emergency management orders not to drive, FedEx spokesman Scott Fielder said.

"The safety of our employees is a top priority," he said. "We have engineered processes to deliver on time, but Mother Nature is the wild card. We have 15 meteorologists working around the clock to track weather patterns across the U.S. and use the updates to build contingencies into our operations."

Brutal cold, slick ice and deep blankets of snow have made delivery more difficult this winter. But more people have been huddling inside and placing orders for delivery. Local restaurants have seen a boost in deliveries and have even had to put extra drivers on shift to keep up with demand.

The Original John's Pizzeria in Munster sees a 20 to 40 percent uptick in business whenever it snows, owner Phil Bacino said.

"It's been fantastic for business," he said. "It takes more time to make the delivery, but everyone has been real understanding and nice about it."

The rest is here:
Winter weather hampers delivery

102 YEARS AGO Feb. 6, 1912

- The Union Lumber Company is making a number of improvements in the mill. A new power set has recently been installed on the south side carriage and is giving good satisfaction. Compressed air cylinders have now been put in to raise the trimmer saws. This will be a great labor saver and enable the trimmer man to do more accurate work. The three carriages are also being overhauled.

- At Mitchell Saturday night at about 9 o'clock, Mr. G. C. Lemmon and Miss Ells Fern were united in holy bonds of matrimony by Judge Whipple at the home of the bride's sister, Mr. and Mrs. Frank Sallinen. After the ceremony, guests enjoyed a bounteous repast followed by dancing in the parlor, which was handsomely decorated for the occasion. A number of useful and ornamental presents were received by the bride and groom. After an evening of much improvement, the guests departed for their homes, wishing the happy couple a long, happy and prosperous life.

- T. De Bernardi is up from San Francisco and is setting out fruit trees on his ranch on the other side of Noyo. Before returning to San Francisco, he intends to put out 500 choice trees and otherwise improve his place. He is the kind of man we like to see locate in our midst.

- Carlton Curtis has returned from a five-months trip abroad. During his travels, he visited London, South America and Panama. Rumor states that he is to take charge of the railroad the first of March.

- Miss Clara Saunders and brother Elmer left for San Francisco Friday afternoon where Elmer will receive medical treatment.

- A son was born to the wife of George Roach at Westport.

72 YEARS AGO Feb. 8, 1942

- Mrs. Edith Ellison received word from her son, Vernon, stating he is now in the Engineers Corps, U. S. Army at Coroval Canal Zone, serving as chief personnel officer and likes the experience very much.

- Mr. and Mrs. Oscar Harrison announce the birth of a son, John Curtis, at the Redwood Coast Hospital February 7th.

Excerpt from:
Glance at the Past

Wycinka drzew na cmentarzu (Robinia pseudoacacia L.) dead tree removal
Wycinka drzew grochodrzewu (Robinia pseudoacacia L.) na terenie cmentarza parafialnego, drzewo umiejscowione bezporednio pomidzy grobami.

By: KarolKryczyk

Here is the original post:
Wycinka drzew na cmentarzu (Robinia pseudoacacia L.) dead tree removal - Video