Home Builder Developer - Interior Renovation and Design

Facelift v Gardiners poles 1 year later window cleaning wfp

By: Mark Munro

Read the original here:
Facelift v Gardiners poles 1 year later window cleaning wfp - Video

Window cleaning cradle falls from Dubai #39;s building, kills one
Sign up for a free trial of News Direct #39;s animated news graphics at http://newsdirect.nma.com.tw/Reuters.aspx A man was killed on Tuesday morning when a wind...

By: NMANewsDirect

More here:
Window cleaning cradle falls from Dubai's building, kills one - Video

How to clean the windows before applying window tint #eclipsetinting
step by step directions window tinting window cleaning.

By: eclipsewindowtinting

See the article here:
How to clean the windows before applying window tint #eclipsetinting - Video

Water heaters are supposed to have periodic maintenance but all too often they are just left to churn away without maintenance and thanklessly make hot water for us, day in and day out. When they've had enough, they quit due to rust and corrosion.

The quickest and easiest way to replace a water heater is to have it done by a plumbing professional, but if you can't afford it or really want to do this yourself, then read on. You need to make sure you're following plumbing codes so calling your local plumbing inspector to find out what municipal permitting requirements and specific criteria they may have is a good idea. But replacing a water heater is not extremely hard, and if you follow this tutorial you'll be back in hot water in no time. Well, plan on a good 4 to 6 hours anyway.

Selecting Your New Water Heater When selecting your new water heater it's easiest to keep the same fuel type, whether gas or electric. That is the assumption made in this tutorial, that you'll keep the same fuel type as the water heater you're replacing. You can change the size a bit however. For example, let's say you had a 40 gallon and want to go to a 50 gallon. That should not be a problem as long as you have clearance between the heater and the wall.

Original post:
How to Install a Water Heater - Replacing a Water Heater - Hot ...

Install a new gas water heater in your home and save energy and money. When installing your water heater, make sure to follow model-specific information, warnings, safety notices and local codes. These instructions aren't intended for mobile home units. Consult a professional if in doubt.

Youll need common plumbing tools and pipe joint compound approved for fuel gas. Youll also need leak detection solution, or you can use childrens soap bubbles or hand-dishwashing soap mixed with water. Most codes require the water heater to be installed in a metal drain pan. See the installation instructions for information about sizing the drain pan and other installation details.

If your house has copper pipes, consider an installation kit with compression fittings that dont require soldering. If your pipes are plastic, youll need connectors / fittings for the specific type of plastic pipes used in your home. Read the installation instructions for the new connectors before cutting the existing water pipes.

Turn the main gas supply valve off. Also, turn the gas control knob on the old water heater off. Open a hot-water faucet, and let the hot water run until cool. Allow the old water heater and vent pipe to cool.

Connect a garden hose to the drain valve. Place the other end of the hose in a drain or outside (you could also use buckets). Shut off the cold-water supply to the water heater, and open a hot-water faucet and the drain valve. While the water heater is draining, read the installation instructions that came with your water heater.

Disconnect the vent pipe from the draft hood. Inspect the old vent pipes for corrosion, obstructions, leaks or other damage, and repair or replace if necessary. Gas water heaters must have free access to adequate combustion air and must be properly vented. The installation instructions explain these requirements, and they must be followed for safe operation.

Disconnect the gas line at the union (youll need two wrenches for that). Remove the gas pipe from the old water heateryou may be able to reuse it. Save the union, too. Next, remove the water lines and the old water heater. Install the new water heater (in a metal drain pan).

Almost all homes have check valves in the plumbing system and now need a thermal expansion tank installed near the water heater. The expansion tank is attached to the cold-water inlet line. To operate properly, the expansion tank must be pressurized with air. Refer to the expansion tanks instructions for details.

The temperature and pressure relief valve (T&P) is an important safety device. It opens to relieve pressure if the water temperature or pressure is too high. Use the new one that came with your new water heater. Dont reuse the old T&P valve.

The T&P discharge pipe should be terminated near a floor drain with an air gap of no more than six inches between the end of the discharge pipe and the drain. Some localities require terminating the T&P discharge pipe outside. In cold climates, we recommend using a floor drain. In all cases, follow the codes for your location.

See original here:
Install a Gas Water Heater - Lowe's

By Rob Robillard

Statues, vases, disappearing fountains and rock fountains are becoming popular backyard focal points. Just go to any garden shop and youll see dozens of options for Koi ponds, waterfalls and basin fountains.

Installing a disappearing or hidden-basin water fountain doesnt take up as much space as a waterfall or Koi pond but still gives you the sound of bubbling water and a great looking focal point for your landscape.

With a disappearing fountain, water is pumped through and out a fountain standpipe from a hidden reservoir buried in the ground. The water then overflows the basin rim and seems to disappear into the ground.

Installing a hidden or disappearing water fountain is a great DIY project and a way to add the soothing sound of moving water to a patio, pool or flower garden area

An anniversary gift of a large glazed pot served as the inspiration for the water fountain. I chose my location based on the fountains best setting in the pool area and its access to power.

Read this article:
Install a “Disappearing” Water Fountain - Extreme How To

home section Interior Design Housekeeping Entertaining Home Improvement Gardening & Plants Landscaping eHow Home & Garden Landscaping & Outdoor Building Special Outdoor Projects How to Install Pond Fountains

Melanie L. Marten

Melanie L. Marten has been self-employed for more than seven years. She taught herself website design and development, as well as freelance writing techniques. Her concentration on articles about making and saving money reflect her interest in helping others improve their quality of life.

Fountains add interest to ponds and water gardens and help with the exchange of gases at the water's surface. Pond fountains come in a variety of styles that will suit any landscaping theme. Anyone can install a pond fountain with the correct materials and a few free hours.

Choose a space without anchored plants for your fountain. If you want an umbrella or spray-type fountain, be sure the section of the pond is wide enough and long enough to catch all of the water falling back down. The location should also be convenient to an electrical outlet.

Attach either a rigid tube or a flexible hose to the water outlet on a pond fountain pump. If the pump is a submersible, it can be positioned so a rigid tube points straight up and supports the fountain head.

Attach a filter to the water intake of the pump to prevent it from sucking in debris. Alternatively, you can attach a hose that will suck water from the upper levels of the pond. Tying a piece of screen or mesh over the end with a clamp or zip strip can help. The pump can also be housed in a plastic bucket that is covered with mesh.

Position the fountain pump under the water in the appropriate position. Be sure the electrical cord reaches to the outlet, but do not plug in the pump yet.

Attach the fountain head to the top of the tube or hose and make sure it sits at the surface of the water.

Plug in the pump, then adjust the direction of the fountain so that all of the water falls back into the pond.

The rest is here:
How to Install Pond Fountains | eHow

Monkey Puzzle Tree Removal
Arborist Ben Brooker dismantling dead Monkey Puzzle Tree on the Isle of Man. Climbing for Grasshopper Ltd. Tree displaying typical die back caused by root di...

By: Ben Brooker

Visit link:
Monkey Puzzle Tree Removal - Video

Tree Removal, Jacksonville FL - CALL NOW (904) 298 4177
TREES NEED TRIMMED? NEED A STUMP GROUND? ARE YOU WORRIED ABOUT POTENTIAL DAMAGE FROM HURRICANES IN THE FUTURE? CALL NOW: (904) 298 4177 http://jacksonville-c...

By: Jacksonville Contractors

More:
Tree Removal, Jacksonville FL - CALL NOW (904) 298 4177 - Video

HOW TO IT Amazing Tree Removal Excavator
HOW TO IT Amazing Tree Removal Excavator.

By: Keerthi Dharmasena

Follow this link:
HOW TO IT Amazing Tree Removal Excavator - Video