Home Builder Developer - Interior Renovation and Design

Enjoy a cool breeze during those humid summer days and save on energy costs by installing a functional, decorative ceiling fan. They can even be used in the winter to gently pull heated air away from the ceiling where it tends to collect. Light kits can be added to increase the usefulness of many ceiling fans. A wide range of both fan and light kit styles are available, providing choices that will contribute to the beauty of any room.

To ensure that your fan is securely mounted to the ceiling and for your safety during installation, read all of the instructions packed with your fan. Since ceiling fans are usually used to replace existing light fixtures, the wiring to the fan should already be complete. Installation isn't difficult and only requires that you pay attention to the instructions. If additional wiring must be done to install your fan and you aren't familiar with wiring, consult a professional electrician. All wiring must conform to local and national codes.

To reduce the risk of fire or electric shock, don't use the fan with any solid-state speed-control device or variable speed switch unless it's specifically designed for use with a ceiling fan. Don't mount the ceiling fan to a plastic electrical box. Use a securely-fastened metal box.

Fan blades must be mounted at least 7 feet above the floor. For maximum efficiency, they shouldn't have any obstruction within 24 inches of the blade tips.

An appropriate junction or outlet box securely attached to the building structure is required. Replace the old box with one labeled as approved for ceiling fans or ceiling-suspended paddle fan installation. The box and its support must be able to support the moving weight of the fan. Use the installation hardware recommended by the junction box manufacturer. Fans over 35 pounds, with or without accessories, require additional support independent of the outlet box.

Secure the new box to a brace between ceiling joists. If there isn't a 2-by-4 wood brace between the joists but you have access to the framing through the attic, add a brace.

Otherwise, install an expandable metal ceiling-fan hanger bar. These may be positioned either from the attic or from below the ceiling, through the rough opening. Secure the box to the bracket with a U-bolt.

Use the following steps to install the mounting bracket to support your fan.

Remove the fan motor screws. These screws will be used later to secure the blade arms to the motor.

Read more:
Install a Ceiling Fan - Lowe's

An easy-to-install ceiling fan can make a real difference in your home's climate - both cooling and heating - at a far lower cost and operating expense than almost any other item.

The installation begins with choosing where the fan should be located. In almost all homes, the fan is installed in the center of the room, replacing a central light fixture. This spot provides a smooth air flow to most of the room.

Since a fan draws about the same power as a ceiling fixture, the electrical circuit shouldn't be overloaded. But if your fan includes lights, be sure the circuit it's on has enough extra capacity to handle the load. If not, you must run a new circuit with a new circuit breaker from the house main service panel or subpanel to the fan.

If there is no central light fixture, you'll have to create a place to hang the ceiling fan. Then, you'll need to bring electrical power to it. You can tap into an existing circuit to do this.

Check the Blade Clearance

Check the floor-to-ceiling height of the fan blades. You can do this by measuring the floor-to-ceiling distance and subtracting for the part of the fan that will extend below the ceiling down to the lower blade surface. An absolute minimum height of 7' is recommended. Building codes in your area may reinforce this.

If the floor-to-ceiling distance is too little, check into a low-ceiling mount for your fan. With some models, the fan blade height can be increased by as much as 10". Remember, though, that you need at least 12" between the ceiling and the tops of the fan blades for proper airflow. Having 18" is better if the space is available.

Tools and Materials

Mounting a Ceiling Fan

Step 1: Turn off the Power Start your installation by turning off the power to the light's circuit breaker or fuse. Only then should you remove the light fixture. Make sure to read all of theelectrical safety tips.

Originally posted here:
Installing a Ceiling Fan | DoItYourself.com

Florida Carpet Cleaning Machine Repair
Carpet Care Professional is among the companies that offer the most reliable and trusted carpet cleaning and repair services. We make sure that the services we offer are of top quality....

By: William Barnes

Here is the original post:
Florida Carpet Cleaning Machine Repair - Video

Welcome to Oxi Fresh

The power of oxygen is undeniable; Mother Nature has used oxygen to naturally purify the Earth for thousands of years. Now let the power of oxygen clean your carpets!

Oxi Fresh is a revolutionary carpet cleaning company that is committed to being green. Our carpet cleaning technology creates a powerful, oxygenated cleaning system that breaks down spots so that they can be effectively removed from the carpet pile. Plus, our green carpet cleaning is safe for children and pets, leaves no sticky residue, and has a fast one hour dry time! With our standards of excellence, we wouldnt accept anything less.

Of course, anyone can make these claims - but wheres our proof? Right here in our carpet cleaning testimonials. Read what customers are saying about Oxi Fresh and how we surpass other carpet cleaning companies. You can also browse our site for detailed information about our cleaning method, find out about franchise opportunities, or get coupons and special offers by visiting our carpet cleaning coupons page!

Enter your zip code into the Oxi Fresh Locator to find carpet cleaning services in your area!

Benefits of our

More:
Carpet Cleaning, Green Carpet Cleaning Services & Franchise ...

Broward County FL Air Duct Cleaning - Whats Is Growing Inside Your Air Ducts - It Will Make You Sick
Broward County, FL Improve indoor air quality TODAY. http://uahac.com Air Duct Cleaning, Air Duct Sanitizing, Dryer Vent Cleaning, AC Repair, AC Tune Up, Rep...

By: CleanDirtyDucts

Read the original:
Broward County FL Air Duct Cleaning - Whats Is Growing Inside Your Air Ducts - It Will Make You Sick - Video

Air Duct Cleaning | (408) 538-7994 | Insulation Replacement
We #39;re qualified to offer you commercial and residential Air conditioning cleaning, air-duct cleaning, dryer vent cleaning, air conditioning filter systems, loft duct clean-ups, loft fans and...

By: AirQualityControl

Read more from the original source:
Air Duct Cleaning | (408) 538-7994 | Insulation Replacement - Video

Air Duct Cleaning Norcross
Air Duct Cleaning Norcross (678) 395-3334 when you need Air Duct Cleaning Norcross, call Daffy Ducts. We are the best company to call for all of your air duc...

By: Air Duct Cleaning Norcross

More here:
Air Duct Cleaning Norcross - Video

Air Duct Cleaning Duluth
Duluth Air Duct Cleaning by Daffy Ducts. (678) 395-3334 Daffy Ducts is an Air Duct Cleaning Company in Duluth that has great prices and outstanding service. ...

By: Air Duct Cleaning Duluth

See original here:
Air Duct Cleaning Duluth - Video

Ablock retaining wall might be just what your landscape needs if you want to level a steep slope or enclose an area for a decorative garden, as this video explains. With a little effort, you'll have a beautifully landscaped area that's easy to maintain. The finished product looks complicated, but the project is quite simple, requiring only basic tools.

These concrete retaining blocks interlock and require no mortar. Aside from the weight, they're almost as easy to assemble as children's interlocking blocks. If you make mistakes or change your mind about the location or shape of your wall, just dismantle it and start over.

Since these systems use no mortar or rebar reinforcement system, they're more appropriate for terraces or raised beds with low walls than those with tall walls. A system of terraces creates a pleasant, stepped slope that's safer than a single, tall wall. A system of terraces also gives you many planting and landscaping opportunities.

Retaining wall blocks in mortarless systems have a lip on the bottom rear side to lock the blocks together and create a step effect. When the cavity behind the wall is filled with soil, the blocks are pushed forward, strengthening the joints between the lips and the underlying blocks. The blocks are tapered from the front face to the rear to allow easy formation of curves.

Mortarless wall block is intended for construction of relatively low walls. Taller walls can be constructed but further consideration must be given to drainage, reinforcement and stability. Recommended dry-fit heights vary by product but for general reference, consider 15 inches to 28 inches as a guide for planning purposes.

Consult the manufacturer's instructions concerning height limits or recommendations made by the manufacturer.

The key to successful retaining wall construction is a level foundation of blocks. The foundation course must be at below-ground level so that the soilholds it firmly in place.

If your property slopes, you may have to dig your foundation trench in a series of steps equal to the height of the blocks. Then, as you continue with construction, build up the lower sections with block until the stepped areas accept successive courses of blocks in a level and seamless wall.

Measure out your prospective wall, using stakes and string to mark off the key points, or use a garden hose to mark off its perimeter.

Starting at the lowest point, use a flat-pointed shovel to dig a trench for the foundation course. The dimensions of the trench will vary depending on the size of your block generally about 4 inches deep. The foundation course should be below-ground level.

Read the original:
Build a Block Retaining Wall - Lowe's

Mold grows virtually everywhere. Look at the studs.

We are one of the most experienced mold removal companies in NJ. In business since 2000, serving the entire state with:

Mold is rampant in New Jersey because we inhabit a coastal and very low-lying area. Mold thrives on the moisture here, growing on and behind walls, in basements, and in attics. Until now

We can safely remove all mold-affected building materials from the property, provide proper disposal, and clean surfaces that cant be easily replaced.

If you are looking for the cure to an ongoing mold problem, we can provide a remedial solution. Mold removal along with moisture mitigation is the 1-2 punch that gets rid of mold and keeps it from coming back.

Up to 20% Off Mold Removal

We provide mold removal and cleanup for:

Mold and mildew are kinds of fungi that can aggravate allergies. These are brownish in color and they can range from very thick to light concentrate on your walls. The appearance and concentration will vary depending on the surface they are growing on such as

We are the most experienced mold removal company in New Jersey, offering our clients:

See the article here:
Black mold removal services companies New Jersey (NJ ...