Home Builder Developer - Interior Renovation and Design

Project: New Windows - 6 +

Date: 06/22/2018

Nature of Project: New Window(s) - Installation

Number of Windows: 10+

Is this an emergency?: No

Request Stage: Planning & Budgeting

Desired Completion Date: Timing is flexible

Project: Install or Repair Door or Window Screens

Date: 06/22/2018

Floor of screen installation: First

Kind of Screen: Insect screen (traditional)

Quantity Needed: 1

Request Stage: Ready to Hire

Desired Completion Date: Timing is flexible

What kind of location is this?: Home/Residence

Property Owner: Yes

Comment: We need to replace the screen door at our front entrance. It is located in a vestibule that has a narrow, screend frame on each side that slao need replacemnt

Project: New Window - Single

Date: 06/21/2018

Nature of Project: New Window(s) - Installation

Number of Windows: 1

Is this an emergency?: No

Request Stage: Ready to Hire

Desired Completion Date: Within 1 week

Comment: Glass is shattered. Needs total replacement

Project: Install or Repair Door or Window Screens

Date: 06/21/2018

Floor of screen installation: First

Kind of Screen: Insect screen (traditional)

Quantity Needed: 2 - 5

Request Stage: Planning & Budgeting

Desired Completion Date: Timing is flexible

What kind of location is this?: Home/Residence

Property Owner: Yes

Comment: i need a deck screened in roughly 5 x 8, and possibly 2 screen doors as well

Project: Install or Repair Door or Window Screens

Date: 06/21/2018

Floor of screen installation: First

Kind of Screen: Insect screen (traditional)

Request Stage: Ready to Hire

Desired Completion Date: Within 1 week

What kind of location is this?: Home/Residence

Comment: Metal frame work repair on lanai at screen door and readjustment.

Project: New Windows - 2

Date: 06/20/2018

Nature of Project: New Window(s) - Installation

Number of Windows: 2

Is this an emergency?: No

Request Stage: Ready to Hire

Desired Completion Date: 1 - 2 weeks

Project: Install or Repair Door or Window Screens

Date: 06/20/2018

Project Description: Screen in existing covered porch or patio

Request Stage: Ready to Hire

Desired Completion Date: Timing is flexible

What kind of location is this?: Home/Residence

Property Owner: Yes

Comment: screen a lanai

Project: Install or Repair Door or Window Screens

Date: 06/20/2018

Floor of screen installation: Second

Kind of Screen: Insect screen (traditional)

Quantity Needed: 2 - 5

Request Stage: Ready to Hire

Desired Completion Date: Within 1 week

What kind of location is this?: Home/Residence

Property Owner: Yes

Comment: watercrest lanai screen replace maybe 2 screens

Project: Install or Repair Door or Window Screens

Date: 06/19/2018

Kind of Screen: Don't Know

Quantity Needed: 6 - 10

Request Stage: Planning & Budgeting

Desired Completion Date: More than 2 weeks

What kind of location is this?: Home/Residence

Property Owner: Yes

Comment: Replacement of some original windows in a 50 year old concrete block home with vinyl, Miami Dade Code windows.

Project: Install or Repair Door or Window Screens

Date: 06/19/2018

Floor of screen installation: Second

Kind of Screen: Insect screen (traditional)

Quantity Needed: 1

Request Stage: Ready to Hire

Desired Completion Date: Within 1 week

What kind of location is this?: Home/Residence

Property Owner: Yes

Comment: around 5X6 screen on small condo porch. In Tara CC Will be down this Thursday thru next week

More here:
24 Best Window Replacement Companies - Bradenton FL ...

We often get asked the same questions when customers call us, so we've added a few of them below (with answers) about our sod delivery and installation services in Dallas, TX:

What do you do?

There are many factors and features that go into landscaping, from rocks, flower beds, plants, trees, drainage, irrigation, sprinkler repair, fence installation, mowing, and so much more. We focus on laying fresh new grass straight from the sod farm. Depending on how many pallets of grass need to be installed, will determine how long and how much your install will be.

What cities do you service?

We generally work in Denton County, especially around Lewisville, TX, including:Flower Mound, Lantana, Frisco, Carrollton, The Colony, Highland Village, Highland Shores, Denton, Addison, Bridlewood, Double Oak, Little Elm, Lake Dallas, Bartonville, Argyle, Roanoke, Grapevine, Keller and Southlake.

How much does sod cost?

How much is sod? Well if you searching online for "sod for sale near me" then you probably know what the cost of sod is from other sod companies. Our sod for sale is always fresh from the farm at wholesale prices. The cost of sod pallets are $140 - $275 but always best to give us a call to get a more accurate estimate - (972) 885-3899

How much does sod installation cost?

The cost of installing sod depends entirely on the size of the land that you want your grass to be installed. Give us a call and we'll come out and give you an estimate.

More here:
Sodscapes Texas - Sod Installation | Sod Near Me | Sod ...

We Love Superior Sod

Empire Zoysia on the left Zorro Zoysia on the right

Centipede Lawn

Centipede (Certified Tifblair): Best Feature low maintenance requirement

Empire Zoysia

Empire Zoysia: Best Feature: Rated by NC State as being the perfect warm season grass, and to date we have seen no problems with Brown Patch

Zorro Zoysia

Zorro Zoysia:Best Feature: Considered the Cadillacof warm season grasses as it provides that sought after, manicured,golf course look with proper mowing.

Raleigh Saint Augustine

Raleigh St. Augustine:Best Feature:Second to none with its ability to tolerate fairly shaded conditions,and its cold tolerance is important for the colder winter seasons we may have here in Southeast, North Carolina.

Bermuda Baseball Field

Tifway 419 Bermuda:Best Feature:this Bermuda is darker green than all other Bermudas, forms a dense turf, and is commonly used on golf courses and athletic fields for its rapid recuperative potential.A solid divot is healed and gone within a weeks time.

THE MERITS OF EMPIRE ZOYSIA

First of all we have a special announcement. We at SUPERIOR SOD AND GARDEN SUPPLY (www.superiorsodnc.com) have been privileged to be an Authorized Grower and Dealer by the developers of EMPIRE ZOYSIA.

EMPIRE ZOYSIA has been our grass of choice for years as it far exceeds the negative issues found with other varieties that are available and promoted in the Wilmington , NC area. These off Zoysia varieties include Crown, Zenith, Jamur, and Meyers. It is always important for a potential Zoysia customer to check into the NTEP Trials (National Turf grass Evaluation Program). There are 28 test sites in the United States, and one of them is located at NC State in Raleigh.

EMPIRE ZOYSIA has been rated as the #1 Zoysia variety today.

EMPIRE TURF is a ZOYSIA grass that has truly raised the bar for warm season grasses. EMPIRE sod combines a soft to the touch, with a lush green color and fine, tight blade growth. VIsually, EMPIRE is an extremely attractive turf grass for any landscaping. Homeowners and Property Managers also appreciate its many maintenance, environmental, and cost saving advantages.

You might not expect a turf grass as soft as EMPIRE to be strong, but this incredible ZOYSIA grass accommodates a variety of activities without suffering extensive wear and tear. EMPIRE Turf is as hardy as it is attractive, and has a deep, thick root structure that makes it more drought tolerant than other turf grass varieties and including other Zoysia varieties. In addition, EMPIRES slower vertical growth and natural chinch bug and chemical resistances mean that your lawn will require less maintenance, mowing, and irrigation. An EMPIRE turf lawn that has been naturalized to the local climate requires minimal irrigation to remain healthy and thriving.

Reduced maintenance needs and durability are EMPIRES hallmarks. EMPIRE ZOYSIA grass was originally developed in Brazil, and thrives in both harsh tropical climates such as Southern Florida as well as more temperate regions as far north as Pennsylvania. EMPIRE Zoysia turf is one of the few grasses rated to perform well in all Zones, and it can thrive in varying soils and climatic conditions.

For instance, during a hurricane, we usually experience flooding and salt water over wash of properties. The only grass that we at SUPERIOR SOD (www.superiorsodnc.com) have seen survive such inundation of salt water even after a week of being underwater is EMPIRE ZOYSIA.

910-686-5296910-443-0596

Save

Read the original here:
Grass Varieties Superior Sod | Mulch and sod in ...

Why Overseed?

Over-seeding is the practice of spreading new seed over an established turf. Bermuda, zoysia, and other warm-season grasses go dormant and turn brown during the colder winter weather. Over-seeding your lawn with a cool-season grass gives you a green lawn throughout the entire year.

When over-seeding, you are actually seeding into the existing warm-season turf. Rye grasses are well suited for this purpose and more specifically perennial ryegrass is highly recommended.Over-seeding just before the warm-season grasses go dormant ensures that youll enjoy green grass throughout the winter months. Good fall establishment will require some seed bed preparation, but tilling should be minimal enough to let the warm-season grass recover well in the following spring.

St. Augustine and zoysia grasses are not well suited for over-seeding. However, lawns featuring bermuda grass are easily over-seeded, producing a green landscape year-long.

The best time to over-seed your lawn with cool-season grasses will occur between October 1st and November 15th. Over-seeding too early in the fall can result in thin, spotty establishment; the actively growing bermuda grass will out-compete the ryegrass. If planted too late, growth is slowed down by colder temperatures resulting in poor establishment.

Ryegrass seed germination will decline after soil temperatures start to move below 63 F. You can stick a cooking thermometer into the ground to determine the temperature. Make holes with a screwdriver to take the temperature in multiple areas of your lawn.

Verti-cut, power rake, and mow your bermuda grass as low as possible to remove or reduce thatch. If you can only mow, lower your mower blades as far as they will go. You essentially want to scalp the grass down as much as possible. This will guarantee good seed contact with the soil. Planting your ryegrass seed is done just like planting grass for a new lawn. Apply grass seed using a spreader or seeder. Apply only 1/2 of the seed in one direction, and then apply the other 1/2 of the seed in the other direction. This method insures an evenly covered seed bed.

If over-seeding with annual ryegrass, plant 10 to 20 lbs of seed per 1,000 square feet. If using perennial ryegrass (recommended), plant 10 to 15 lbs of seed per 1,000 square feet. Over-eeding more than this may cause excessive competition among seedlings. Crowded seedlings will be more susceptible to diseases.

After seeds are planted, they must stay moist to germinate properly. Covering the seeds with finely-ground bark mulch, manure compost, or sand which will help hold the moisture in; this practice is known as top-dressing. Do not use peat moss because it is difficult to keep wet and can blow away.

Light, frequent watering (up to three times a day) is essential during the first seven to ten days. Keep the soil moist until the seedlings have established their roots.Germinating seeds need a lot of oxygen so dont overwater and cause flooding.

Water the newly-planted seed for about 15 minutes to get the grass seed and soil soaked well the first time. Continue watering three times daily for 3 to 7 minutes each for the first 7 to 10 days. If your soil drains well, you may water for longer but if your soil is heavy and doesnt drain well, prevent puddling by shortening your watering time. Once germinated, grass seed watering intervals should gradually shift to about once each week. During the coldest times of the season, you may only need to water once every two weeks.

Monitor the soil moisture by sticking a screwdriver into the soil. If the screw driver goes in easily and comes out damp, you dont need to add water. You want to keep the top six inches of soil moist; when your grass needs water, it will let you know. Symptoms of moisture stress are wilting, grey-green color and footprint indents remaining visible long after stepping over lawn.

Two weeks after seedlings emerge, apply a high-phosphorus grass fertilizer, which will promote good root development. There are many starter fertilizers that you can choose; one example is ammonium phosphate (16-20-0), which you would apply at about 5 pounds per 1,000 square feet.

Annual and perennial ryegrass should be first mowed when they reach heights between 2 -inches and 3 inches. If using a rotary mower, set the blade height between 2 -inches and 2 -inches. If using a reel-type mower, mow your lawn between 1 and 1 -inches, when grass is a third of the normal mowing height.

Bermuda and most warm-season grasses start growing back when nighttime temperatures reach the upper 60s. To encourage the return of your bermuda grass, lower the mowing height to an inch or less once the nights become warmer. This will effectively scalp the cool-season grass, reducing shade and warming the bermuda grass beneath. At this point, stop fertilizing, but continue mowing low and maintaining good soil moisture for your grass. This will reduce competition between the bermuda and the ryegrass, helping your bermuda grass come back strong.

Click here for more information about your home state!

More here:
Over-seeding Grass - PLANTING GRASS SEED CENTER

Designing and building a deck can be a fun and rewarding experience. But with any home improvement project it is important to always consider safety first. Please carefully read and accept the terms of use before we get started.

The deck designer and related plans are to be used as an educational guide and not to be considered a finalized deck building plan. It is your responsibility to verify the accuracy and compliance with your local building codes and site conditions.

Decks.com accepts no liability for any damages including personal injuries or property losses for the information published from the decks.com deck designer. We cannot anticipate your entire field working conditions or the characteristics of your building materials and tools. Consider your skill level and use caution and good judgement when using this information. If you have questions or concerns consult with your local building inspector, engineer or architect. Always obtain the necessary building permits and follow local codes and guidelines.

Be sure to follow the building plans and instructions carefully. You are responsible for ensuring that the measurements and design are correct. Due to the size, shape, height, site location, anticipated use and other factors you may be required to install additional structural support including knee bracing or bridging between joists that isnt included in the decks.com designer, related plans and construction guide. You are responsible for verifying that the design and any modifications you make meet local building codes.

Decks.com accepts no liability or responsibility for your design, construction or the use of any products supplied by Decks.com.

You assume total responsibility and risk for your use of the decks.com deck designer.

Link:
Decks.com. Free Plans & Deck Design Software

KBR Kitchen and Bath (KBR) specializes in full scope kitchen and bathroom remodeling. Along with that, we have the expertise to reconfigure spaces and make your area open concept or build walls to give you more storage and functionality. You may want to take out a tub and add a stand up shower or extend your existing shower area. With its award-winning bathroom remodeling services, KBR can provide you with modern, frame-less glass shower door options, or sliding glass doors. We also do drywall repair, painting, add closets, install hardwood flooring and refinishing, recessed lighting and more.

When it comes to our state-of-the-art kitchen remodeling services, KBR offers many options in cabinetry and material choices from marble and travertine surfaces to porcelain selections with many sizes, colors and styles. We provide granite or quartz counter-tops for your kitchen -- whatever works best for you. We have the resources and vendors to give you the flexibility to help you create the best kitchen or bathroom renovation of your dreams that fits your taste and style. We know you're busy so take advantage of our one-stop shopping kitchen and bathroom remodeling services and we'll assist and guide you each step of the way - from the early planning to five-star satisfactory completion.

VA # 2705145557 MD # 105209 DC # 42021300043

Read this article:
Best Kitchen & Bathroom Remodeling in Virginia, Maryland ...

Phoenix Cabinet RefacingsiteAdmin2017-08-08T14:26:07+00:00Refacing is a straightforward process. Instead of removing your existing cabinets, we just remove your old doors and drawer fronts andreplace them with new updated ones. We reface the cabinet boxes with 1/4 inch thick solid wood to match the new paint or stain color you selected, so everything matches and looks brand new.The Mini reface is where we replace just the doors and drawer fronts. The greatthing about this option is that it can complete in one day. And the costs are considerably lower. Check out our Mini Reface page for more details.Why Home Improvements of ArizonaWeve expanded our family-owned business into the Phoenix area. Our Phoenix operation is managed by Nathan Klein, a Phoenix-area native who has worked as part of our team for many years. We are excited to be part of the Phoenix Home Improvement community.

Home Improvements of Arizona brings the same quality work for cabinet refacing to Phoenix that we have been providing since 1993.

Everything on this site applies to both the Phoenix Arizona area as well as our other locations. Look around and call us at 480 249-2703 for a free in-home estimate.

Excerpt from:
Phoenix Cabinet Refacing - Home Improvements of Colorado

Currently, the average hot water heater cost is $800-2,500, including installation. If the last time you replaced a water heater was 10 years or more, and its starting to give you trouble, it may be time to get a new device.

Lets take a look at the installation costs for different water heater types, as well as factors that impact the total price.

How much does a water heater cost?

Water Heater Repair

$250 - $350

40 Ga. Water Heater

$850 - $1100

Tankless Water Heater

$1200 - $3500

See costs in your areaStart Here - Enter Your Zip Code

Homeowners across the US are paying $850-2,500 to install a new water heater (including device and labor). Such a wide price ranges depends on the following:

type of heater (tank vs. tankless) size/capacity (40, 50, 75 gallons) power type (gas, electric, solar).

The installation cost itself may also vary greatly, depending on the complexity of the job.

In some cases, homeowners end up paying $1,000-3,000 for the install, on top of the cost of the heater itself. You can expect higher than average installation charges if you want to switch from a storage tank to an on demand heater.

There are four general types of water heaters: tank-style, tankless, hybrid and solar.

Tank and tankless are the most popular, so we will focus on them.

Tank (storage) style: this is the most common and budget friendly hot water heater. It continuously heats and stores a specific amount of water (40, 50, 75, 100 gallons), in an insulated tank. The stored water is delivered via pipes, when its needed. Lower-end models can cost as little as $300, but on average they run $650-850, by brands like Westinghouse. High- end tank heaters can cost over $1000, by brands like A.O.Smith.

Tankless (on demand): these water heaters DONT store water. Instead, they use special heating coils to heat water when you need it. These devices can cost significantly more than tank models of the same size (although high-end water heaters cost about the same). Prices start at around $800 for a gas heater from brands like Rheem, and can go up as high as $1,500+ for premium brands like Noritz.

Electric tankless water heaters cost $160-500, with EcoSmart, being a very popular, highly rated brand.

If you have been researching various water heater options, you way be wondering if its worth it to pay more for a tankless model. Perhaps a traditional hot water heater would be just as good?

Well, here is some advice from the pros to help you choose the best product for your household needs.

Why a tankless water heater may be the right choice:

A typical on-demand unit is more expensive than a storage one, because it offers a number of significant advantages:

Why a storage tank heater may be the right choice:

With tank-style models, the size of the water heater has a direct impact on the price. The bigger the tank, the higher the price. The difference between 40 vs 50 gallons is about $150-250, depending on the manufacturer. However the difference between 50 vs. 75 gallons can be as high $400-600. Tanks that hold 100 gallons are very expensive. They often cost double or even triple the price of a 50 gallon tank of the same brand.

How much does a water heater cost?

Water Heater Repair

$250 - $350

40 Ga. Water Heater

$850 - $1100

Tankless Water Heater

$1200 - $3500

See costs in your areaStart Here - Enter Your Zip Code

How to choose a water heater (video):

How to quickly determine the right size water heater for your house

It all boils down to how much hot water you use. Some people like 30-minute showers and long baths, while others are in and out in 5 minutes, and never/rarely take a bath.

I was going to get us a 40 gallon tank, because I take 3-5 minute showers. But my plumber convinced me to go with 50 gallons, and he was absolutely right! My kids take baths (we have a large jacuzzi tub), and when they do, hot water disappears!

With tankless models, efficiency is determined by the maximum temperature rise possible at a given flow rate, known as GPM. Average size tankless heaters have a GPM rating between 5-6. More powerful devices can go as high as 11-12 GPM. Roughly, every additional GPM costs about $100 extra, depending on the manufacturer.

Keep in mind that gas tankless water heaters produce a larger temperature rise per GPM than electric models. This means that if your household water usage is very high and frequent, you are better off paying more for a tankless gas model.

Note, whether you go for a storage or tankless device, its important to get the RIGHT size, based on a real calculation of your households water usage. This may mean spending more money upfront, but its well worth it!

If you get a heater that is too small, your family will be very uncomfortable for the next 10-12 years in all daily tasks, from taking showers to doing laundry.

Electric heaters cost significantly less than gas ones. Among tankless models, the majority cost between $200-350. A device that costs between$700-800 is considered the very top of the line, from brands like Stiebel. By comparison, the $700 dollar range is a fairly low average for a tankless gas water heater. The vast majority of gas devices cost between $1,200-1,800.

When it comes to storage water heaters the difference in price between electric vs gas-powered models is less pronounced. The range for most electric devices is $300-600, and you can find many gas heaters in the same price range. Still, gas tank style heaters are more expensive overall, with many costing well over $1,500.

When you browse different devices, you will quickly notice that some water heater brands cost at least double the price of others, when all else is equal.

However, high-end brands are often more expensive for the following reasons:

they have better quality internal parts that last longer overall better design offer longer, more comprehensive warranties

Surely, you will also be paying a premium for the prestige of certain brands.

It may not be worth it to splurge thousands of dollars on a heater by A.O Smith or Westinghouse, but it is also safer to steer clear of budget brands. While you will save a few hundred dollars upfront, in the long run, you will spend more on repairing or replacing a device that stopped working way before the expected end of life.

Your best bet is to go for good quality brands such as Rheem, Tagaki, this is where the BEST VALUE is.

There are a number of things that will effect how much a plumber charges for labor on a particular install:

1. Type of heater: if you are installing a regular gas storage tank, the job is fairly straightforward. This is especially true if you are simply replacing a heater that you had before with a new model. Consequently, you should expect to pay no more than $300-450 for this work.

Installation of a tankless gas heater starts at around $1,200 because the process is more involved and time-consuming.

If you have a storage unit and want to switch to a tankless one, you should be prepared to spend a lot more. This is because, in most homes the existing gas piping, meter and gas line to the meter, may not be able to handle the high gas load of a tankless device.

Consequently, there will be a lot of complex labor involved in the switch, such as:

retrofitting the existing gas line perhaps putting in a new line installing a proper venting system possibly having additional electrical wiring done (you will need to hire an electrician) maybe re-routing gas and water lines, and possibly electricity, depending on the layout of your basement and ventilation.

Moreover, you may not be able to vent the gas tankless heater into the chimney and may need to do a direct vent outside. Homeowners looking to make this switch should budget $1,500-3,5000 for labor.

Similarly, if you are switching to an electric tankless device, an electrician will need to do a lot of work to rewire and expand your homes existing system to handle the extra power usage from the heater (which is VERY high). Some of the most powerful electric tankless models can use as much as 120 amps. So if you have a 100 amp service, you cant use an electric tankless water without upgrading the electric panel to at least 200 amps. This will cost an extra $1,000-1,500 on average, but can be as much as $3,000 depending on the complexity of labor involved, such as having to open walls, etc.

2. Your location: while this may not seem fair to you as a homeowner, the reality is that contractors rates vary depending on where you live. In high-income suburban areas, as well as expensive cities such as San Francisco, New York, Boston, Miami, a plumber will charge as much as 15-25% more for labor, compared to areas where incomes are significantly lower.

3. Unreasonable pricing scams: because most homeowners have no idea about plumbing and what this work entails, many plumbers take the liberty of charging EXTREMELY high prices for NO REASON. For example, many companies may offer to buy the hot water heater for you (they will help you select one), and then will roll their labor fees into the total cost. As a result, many people end up paying as much as the cost of the heater itself, for an easy, straight forward installation! For example, if your heater costs $700, your total charge will be $1,400, or more.

To avoid these types of companies, it is important to get estimates from 3-4 local professionals, and ask them exactly what type of work they will be performing. It is also a good idea to conduct your own research online, ask your neighbors, etc, to see how much people in your area are paying for this home improvement project. If a contractor sees that you have done your research, he will most likely give you a fair price.

We strongly recommend paying for professional installation, as opposed to going DIY, because dealing with gas and electricity can be very dangerous!

How much does a water heater cost?

Water Heater Repair

$250 - $350

40 Ga. Water Heater

$850 - $1100

Tankless Water Heater

$1200 - $3500

See costs in your areaStart Here - Enter Your Zip Code

Read more from the original source:
Costs To Install A Hot Water Heater In 2018

On This Page:

Hot water is an essential part of modern life, a necessity rather than a luxury. So choosing and installing a water heater is a very important decision in the life of your home. Whether you are replacing an old water heater or installing a brand new system, you may be concerned about the price. There are a number of factors that play a part in the cost of installing a new hot water heater.

Average cost with installation:

Water heaters come in two different styles: tank and tankless. Both heat your water, but they do it in different ways. A tank style water heater stores a given amount of water, usually 40 to 50 gallons, and keeps it heated to the temperature you set it at, sending it along when you open the hot water tap. A tankless system doesnt store the water and heats it only when you need it by means of a series of super-heated coils. Each kind has its good points and bad points:

Tank

Pros

Cons

Tankless

Pros

Cons

Return to Top

Water heaters are either gas-fired or electrically-fired. The difference between the two is how the water is heated, via natural gas or electrical resistance coils. Gas water heaters are less energy-efficient than electric water heaters, but the cost of electricity can still make gas the less expensive choice. Here are some other points of comparison between the two:

Electric

Gas

Energy Source

Whatever your city uses

Natural gas

Works During Power Outage

No

Yes

Lifespan

About 12 years

Recovery Rate

About 14 gallons per hour

About 50 gallons per hour

Energy Efficiency

90%

60% - 70%

Cost Over 12 Year Lifespan

$6248.00

$4979.00

Price of Unit

$300.00 to $2,880.00

$250.00 to $1,500.00

For a large family of 5 or more people, a gas water heater will be the most suitable. The fast recovery time will ensure that you have enough hot water for your needs in as short a time as possible. Even the on-demand tankless water heaters cant keep up with the high demands of a large family and will slow the water to a trickle the higher the demand gets.

Small families and studio apartments can often use an electric or tankless water heater (if the apartments are on individual units). With a tankless system, the relatively low demand on the water heater allows you to take full advantage of the energy efficiency without taxing the unit.

Solar Water Heaters

Some people supplement their hot water system with a solar water heater. While these can help increase the hot water available for your family, they are also very expensive. They can cost over $1,000.00 at their base price, and the amount of savings varies widely according to your use.

Return to Top

To determine what size water heater you need, keep in mind that bigger isnt always better. A conventional water heater is running all the time, so it will waste money to heat water that youre never going to use. Fortunately, calculating what size to get is easy, requiring only simple, grade-school level math.

First you need to figure out your FHR (First Hour Rating). This is the amount of water youll use during your homes peak time of water usage. This is usually first thing in the morning when everyone is taking showers, brushing their teeth, filling the coffee pot, etc. To do this, count the number of people in your household (or, if the house is currently unoccupied, count the number of bedrooms) and add 1. A four-bedroom house, for example, would come out to 5. Multiply that number by 12, the estimated gallons of hot water each person will use. For this example, the total is 60. (4+1=5, 5x12=60).

Now that you know your homes FHR, youll want to get a water heater with the highest energy factor (EF) that you can afford. All of this information should be on a yellow label on the water heater.

The average water heater for a family of 5+ is around 50 gallons. The average FHR for these units ranges from 67 on the low end to 81 on the high end.

Return to Top

To begin with, lets revisit grade-school science: hot water expands.

Water is not compressible, which means that as it heats up, it will not press in on itself. It will look for somewhere to go. Check valves keep the expanding water from flowing back into the municipal water supply. This helps your municipality protect the city water supply from contaminants.

So where does that water go as it expands? Most water heaters have a little room inside for expansion. However, even though water doesnt normally expand by much, any system can fail. In this case, the expanding water flows into the expansion tank. The expansion tank is usually more than adequate to handle the anticipated pressure from your tank.

Do you need one? Yes. Without a safe place for the expanded water to go, you can experience a total failure of your water heating system. This is a fancy way of saying that your water heater and/or pipes can burst. Many codes today require an expansion tank be installed with new construction. For a retro-fitting, most expansion tanks cost between $40.00 and $70.00. Someone who is handy with tools can install their own. If you have any doubts, though, call a plumber. This project involves gas and/or electrical lines.

Return to Top

Do you need a new water heater? Here are some easy ways to find out. Some may require a little periodic checking while others become obvious only after things have gone wrong:

When it comes time to replace your water heater, its best to call a professional. This way you can be sure that everything has been done safely and to code.

Return to Top

The most popular brands of water heaters are popular for a reason. They are reliable, affordable, and readily available. Some brands, such as AO Smith, are sold exclusively by plumbing wholesalers and contractors. Others are available at your local hardware or home improvement stores.

The costs above are estimates for the water heater only. They are for the common 40- to 50-gallon capacity units and do not include installation, transportation, or other additional costs.

Return to Top

A water heater is a must in your home. As technology advances, the efficiency of these systems will increase, making hot water even more affordable than before. Though some systems can be installed DIY, its best to call a professional to be sure the job is done right.

Return to Top

Read more here:
2018 Water Heater Installation Costs | Price to Replace a ...

Trust Lowe's With Your Water Heater Installation

From gas water heaters to electric water heaters, tankless water heaters and more, we'll help you find the best product for your needs and ensure it's installed to your satisfaction.

Forget the Worry. You're Covered.

POPULAR WATER HEATER CATEGORIES

WATER HEATER BUYING GUIDES & RESOURCES

Lowes Can Help With Your Water Heater Installation

Need help with a water heater installation? You dont have to know how to install a water heater or how to install a tankless water heater yourself. Lowes independent installers have you covered for tankless water heater installations and any other hot water heater installations your property may require. Why learn how to install a hot water heater yourself? Tankless water heater installation costs may be less than you think. You have better things to do than installing a water heater or managing water heater installation costs. Quit wondering how to install a water heater and contact Lowes today.

View original post here:
Water Heater Installation from Lowe's