Home Builder Developer - Interior Renovation and Design

1. Low Cost, Easy Maintenance

A patio can be created with many materials, but it's hard to beat one made from pavers for ease of installation and low maintenance. The initial cost may be higher than other options, but you'll save in the long run by not having to stain or seal it continuously. Plus, repairs are easier, one paver at a time.

Before you prep your patio area, call your local utilities or 811 to have any plumbing, cable or electrical lines marked. Then dig down below the root level of vegetation in the area, a good six inches or so. For dry soil, try watering the area the night before you plan to dig to dampen and soften the area for easier digging.

Use landscaping cloth to create a barrier between the old soil and the new base of sand you'll be using. This will minimize the efforts of weeds and other unwanted vegetation to encroach upon your patio from underneath. Calculate the square footage of your patio space by multiplying the length by the width and add 10 percent.

Pack in the paver base and/or sand using a wacker plate compactor or tamper. You need a solid, level and smooth base upon which to lay pavers. Remember to repack each subsequent layer of material.

While it's important to have a level patio, you need to make sure it does slope away from your home's foundation and toward an area that can either handle additional moisture or is an existing drainage area. Plan for a quarter inch drop in elevation for every two feet of distance.

To help minimize the effect of movement of your pavers, be sure to plan for a good solid edge by using additional pavers, a solid cement lip, or metal or vinyl edging. In addition to stability, this will also help minimize creeping weeds.

You'll run into slight color variations in your pavers, just like you would with different lots of wood flooring or tile. Blend varying piles of stones or bricks together to create a natural look, so you'll avoid a patchwork appearance.

If you create any sort of pattern with your pavers, you'll need to cut some of the stones or bricks at some point. You can use a cold chisel to do this, or you can save your hands and rent a wet saw from your local home center.

Set your pavers in place by applying a layer of sand over and between them until the cracks are completely full. This will help keep them set in place, minimize weeds and allow for drainage.

Keep a few extra stones or bricks on hand to make repairs easier (you never know when your particular paver may be discontinued). Broken pavers can be removed by prying them out with a couple of screwdrivers or a thin pry bar. If the paver needs to be cut to fit, be sure to cut it slightly smaller than the length of the opening to allow for sand to be repacked around it.

Excerpt from:
10 Tips and Tricks for Paver Patios | DIY Deck Building ...

There are a huge variety of patio surfaces to choose from. They can be mixed and matched in endless color and texture combinations to give you the unique style you are looking for.

66

65

64

63

62

61

60

59

58

57

56

55

54

53

52

51

50

49

48

47

46

45

44

43

42

41

40

39

38

37

36

35

34

33

32

31

30

29

28

27

26

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

89

88

87

86

85

84

83

82

81

80

79

78

77

76

75

74

73

72

71

70

69

68

67

66

65

64

63

62

61

60

59

58

57

See the article here:
Patios & Decks Custom Outdoors

Often, when people want to update their homes, the first thought is to rip out and replace the cabinets. This can lead to an unnecessarily messy and expensive project. Cabinet refacing is one alternative to consider, but when you decide that you want to update the cabinets in your kitchen, N-Hancescabinet renewal brings the best value and results. Rather than replacing the entire cabinet unit or only refacing with new cabinet doors, you can simply update the outside to make it look fresh and brand new.

Over time, cabinets can get worn down by regular use, and theyll start to look dull. Sometimes fashion trends evolve, leaving your old kitchen hardware looking dated. Other times you might just feel like a change is in order because your kitchen doesnt reflect who you are. In any of these scenarios, cabinet refinishing is a superior option to cabinet refacing or replacement and can do a lot to bring a fresh, new look to your kitchen.

Traditional cabinet refacing can take as long as five days, and thats not including the week or more it can take to order the veneer and doors. It involves completely replacing the cabinet doors and fixtures you already have installed, which is expensive. With N-Hance, your time until completion will be shortened by days, if not weeks. You can even use the same cabinet doors you already have. N-Hances process will update the doors in your kitchen and have them looking brand new.

N-Hance offers hundreds of color options to choose from, meaning you have a near-endless array of options in how you want your kitchen to look. N-Hance will even help you choose, walking you through the process of deciding which finish perfectly suits your style.After selecting from our wide variety of colors, you can also customize the look with a finishing technique such as a glaze, antiqued,look or other accenting.

If you select traditional cabinet refacing, you can end up spending thousands of dollars very quickly, with some projects rising to $10,000 or higher! N-Hances cabinet refinishing process, meanwhile, costs a fraction of other kitchen cabinet refacing services. Because we use the cabinet doors that you already have in place, there is no need to replace them.

The most obvious benefit of updating your cabinets is how it will make you feel about your kitchen. There is just a feeling of freshness and newness, being in a space that is decorated in just the way you choose. Replacing the entire cabinet, however, is a bit of an overreaction and comes with a whole lot of mess, inconvenience, and expense.

With cabinet refacing, you need to worry about matching the new cabinet doors with the original boxes. If they dont match, then you may end up with the added headache of having the new doors, drawers, and existing cabinet boxes all refinished to match one another. This can add several days, or even weeks, during which you will have little to no access to your kitchen. N-Hances cabinet renewal process can take as little as a single day, and it doesnt leave behind any of the dust. You wont have to spend any extra money on new cabinets and hardware, and you wont have to find a way to dispose of your old cabinets, which will likely end up in a landfill.

N-Hance is an affordable and innovative option for refinishing your wood cabinets without the expense, excess dust, inconvenience, and long-lastingodors that traditional kitchen cabinet refacing and cabinet painters can bring. We clean the cabinets you already have and give new life to them, making them look both modernand well-maintained without the mess or cost.

N-Hances Lightspeed Instant-Cure Wood Refinishing is what really sets us apart from our competitors, with minimalodor associated with it. Because it dries so quickly, it also allows N-Hance to complete most jobs in half the time as traditional cabinet refacing or refinishing companies. The Lightspeed process also cures the wood surfaces using a powerful ultraviolet light, giving your cabinets an extra layer of durable finish.

N-Hances process includes the following steps:

By using N-Hance for your cabinet renewal, you can rest easy, knowing that you have chosen an environmentally sound option. While many cabinet refacing options entail completely replacing your doors and fixtures, N-Hance renews what is already there, saving trees and fossil fuels, and reducing greenhouse emissions. Our process also doesnt result in a lot of dust, meaning your home will not be filled with sawdust that can clog up your lungs and negatively impact your health. We also use high-performance, water-based polyurethane finishes with fewer Volatile Organic Compounds (VOCs).

Your finished cabinets will have the same durability and life as you would find in a high-quality, factory finished cabinet. To further extend their life, we recommend our N-Hance Clean and Recoat process, which can further extend your cabinets appearance. By properly maintaining your cabinets, you can keep your cabinets looking beautiful for longer!

Kitchen remodels have proven to be one of the most beneficial home improvements you can make when it comes to increasing the value of your home, with potential returns of between 3 and 7 percent, according to Consumer Reports. Because N-Hance is a fraction of the cost of replacing or refacing your cabinets, your budget will go much farther, allowing you to update other areas of your kitchen to match, such as a new countertop, new appliances, or a new backsplash over your stove. N-Hance is a lower-cost option that can bring high satisfaction while you are living in the home and high returns, should you eventually decide to sell.

We have a simple search tool right here on our website! Simply click the button that says Search For Local N-Hance at the top of the page. When you fill in your address, you will be given a phone number to contact the N-Hance office closest to you!

Read the original here:
Kitchen Cabinet Refacing | Services Overview | N-Hance

Creative Cabinet Refacing has been locally owned and operated by the Weathington family since 1992. We are experts in dramatically updating your kitchen, bathroom, office, or utility room through cabinet refacing and countertop replacement.

We humbly appreciate the benefits of having earned a great reputation in the Jacksonville area. We are honest and dependable and pride ourselves on delivering an exceptional product in the agreed-upon timeline.

Basically, we treat people the way we like to be treated and try to always use other service professionals and contractors with a similar work ethic. We have never been accused of using high-pressure sales tactics; its just not our style. In fact, we consider our lack of high-pressure selling tactics to be one of the secrets to our success. Our prices are fair, our products are premium and our workmanship is top-notch.

People choose us as a combination of liking us, loving our product, and appreciating a good deal to meet their needs.

People choose to reface because it makes sense. If cabinets are structurally solid, then why rip them out and waste the whole cabinet? Choosing from a large variety of styles and colors, a homeowner can achieve their dream kitchen with less time, less mess, and less money without having to gut the whole kitchen.

For homeowners who already have nice countertops that they wish to keep, cabinet refacing is the perfect solution for updating the cabinets without harming the countertops. On the other hand, homeowners also find it convenient that we also offer countertop replacement.

Read the original post:
Creative Cabinet Refacing | Cabinet Refacing and Custom ...

1 INTRODUCTION 1.1 What is this Report About? 1.2 Definitions 1.3 Summary Methodology 2 Office Buildings Construction in Egypt to 2020: Market Databook CONSTRUCTION: CATEGORY DATA 2.1 Office Buildings Construction in Egypt to 2020: Market Databook Construction Output: Historic Market Value 2.2 Office Buildings Construction in Egypt to 2020: Market Databook Construction Output: Historic Market Value by Cost Type 2.3 Office Buildings Construction in Egypt to 2020: Market Databook Construction Output: Forecast Market Value 2.4 Office Buildings Construction in Egypt to 2020: Market Databook Construction Output: Forecast Market Value by Cost Type 2.5 Office Buildings Construction in Egypt to 2020: Market Databook Construction Value Add: Historic Market Value 2.6 Office Buildings Construction in Egypt to 2020: Market Databook Construction Value Add: Forecast Market Value 3 Office Buildings Construction in Egypt to 2020: Market Databook CONSTRUCTION: ACTIVITY ANALYSIS 3.1 New Construction Output 3.2 New Construction Output by Cost Type 3.3 New Construction Output Forecast 3.4 New Construction Output Forecast by Cost Type 3.5 Repair & Maintenance Output 3.6 Repair & Maintenance Output by Cost Type 3.7 Repair & Maintenance Output Forecast 3.8 Repair & Maintenance Output Forecast by Cost Type 3.9 Refurbishment Output 3.10 Refurbishment Output by Cost Type 3.11 Refurbishment Output Forecast 3.12 Refurbishment Output Forecast by Cost Type 3.13 Demolition Output 3.14 Demolition Output by Cost Type 3.15 Demolition Output Forecast 3.16 Demolition Output Forecast by Cost Type 4 APPENDIX 4.1 Methodology 4.2 About Timetric 4.3 Our Services 4.4 Disclaimer

List of Tables

Table 1: Timetric Construction Market Definitions Table 2: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction Output Market Value, 2011-2015 Table 3: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction Output Market Value, (US$ Million) by Cost Type, 2011-2015 Table 4: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction Output Market Value, (EGP Million) by Cost Type, 2011-2015 Table 5: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction Output Market Value, Forecast, 2015-2020 Table 6: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction Output Market Value, (US$ Million) by Cost Type, 2015-2020 Table 7: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction Output Market Value, (EGP Million) by Cost Type, 2015-2020 Table 8: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction Value Add Market Value, 2011-2015 Table 9: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction Value Add Market Value, 2015-2020 Table 10: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, New Construction Output, 2011-2015 Table 11: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, New Construction Output (US$ Million) by Cost Type, 2011-2015 Table 12: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, New Construction Output (EGP Million) by Cost Type, 2011-2015 Table 13: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, New Construction Output Forecast, 2015-2020 Table 14: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, New Construction Output (US$ Million) by Cost Type, 2015-2020 Table 15: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, New Construction Output (EGP Million) by Cost Type, 2015-2020 Table 16: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Repair & Maintenance Output, 2011-2015 Table 17: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Repair & Maintenance Output (US$ Million) by Cost Type, 2011-2015 Table 18: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Repair & Maintenance Output(EGP Million) by Cost Type, 2011-2015 Table 19: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Repair & Maintenance Output Forecast, 2015-2020 Table 20: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Repair & Maintenance Output (US$ Million) by Cost Type, 2015-2020 Table 21: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Repair & Maintenance Output (EGP Million) by Cost Type, 2015-2020 Table 22: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Refurbishment Output, 2011-2015 Table 23: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Refurbishment Output (US$ Million) by Cost Type, 2011-2015 Table 24: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Refurbishment Output (EGP Million) by Cost Type, 2011-2015 Table 25: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Refurbishment Output Forecast, 2015-2020 Table 26: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Refurbishment Output (US$ Million) by Cost Type, 2015-2020 Table 27: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Refurbishment Output (EGP Million) by Cost Type, 2015-2020 Table 28: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Demolition Output, 2011-2015 Table 29: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Demolition Output (US$ Million) by Cost Type, 2011-2015 Table 30: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Demolition Output (EGP Million) by Cost Type, 2011-2015 Table 31: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Demolition Output Forecast, 2015-2020 Table 32: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Demolition Output (US$ Million) by Cost Type, 2015-2020 Table 33: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Demolition Output (EGP Million) by Cost Type, 2015-2020

List of Figures

Figure 1: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction Output Market Value, (US$ Million), 2011-2015 Figure 2: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction Output Market Value, (US$ Million) by Cost Type, 2011-2015 Figure 3: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction Output Market Value, Forecast (US$ Million), 2015-2020 Figure 4: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction Output Market Value, (US$ Million) by Cost Type, 2015-2020 Figure 5: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction Value Add Market Value, (US$ Million), 2011-2015 Figure 6: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction Value Add Market Value, (US$ Million), 2015-2020 Figure 7: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, New Construction Output (US$ Million), 2011-2015 Figure 8: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, New Construction Output (US$ Million) by Cost Type, 2011-2015 Figure 9: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, New Construction Output Forecast (US$ Million), 2015-2020 Figure 10: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, New Construction Output (US$ Million) by Cost Type, 2015-2020 Figure 11: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Repair & Maintenance Output (US$ Million), 2011-2015 Figure 12: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Repair & Maintenance Output (US$ Million) by Cost Type, 2011-2015 Figure 13: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Repair & Maintenance Output Forecast (US$ Million), 2015-2020 Figure 14: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Repair & Maintenance Output (US$ Million) by Cost Type, 2015-2020 Figure 15: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Refurbishment Output (US$ Million), 2011-2015 Figure 16: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Refurbishment Output (US$ Million) by Cost Type, 2011-2015 Figure 17: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Refurbishment Output Forecast (US$ Million), 2015-2020 Figure 18: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Refurbishment Output (US$ Million) by Cost Type, 2015-2020 Figure 19: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Demolition Output (US$ Million), 2011-2015 Figure 20: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Demolition Output (US$ Million) by Cost Type, 2011-2015 Figure 21: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Demolition Output Forecast (US$ Million), 2015-2020 Figure 22: Egyptian Office Buildings Construction in Egypt to 2020: Market Databook Construction, Demolition Output (US$ Million) by Cost Type, 2015-2020

See more here:
Office Buildings Construction in Egypt to 2020 ... - fastmr.com

Need a New Church Building? View our entire collection of Church Designs.

Whether youre looking to build a brand new house of worship, or your church is in need of expansion youre going to need an experienced contractor you can count on.

Weve completed more than 40 church projects over the last decade with fantastic results.

If you are considering expansion work or new construction for your church property, call us at (FL) 813-750-1222 or visit our dedicated Church Building websiteChurch Builders Southeast for more information on our church construction services.

Canco General Contractors have successfully managed the construction and expansion of more than thirty churches and worship centers of all shapes and sizes throughout the southeast United States.

Our clients are as important to us today as they were when we first started, back in 1986.

Interior of St. Johns Episcopal Church

In fact, four out of five clients come back to us for their next construction project. Many come back again, and again and some have hired us to manage the completion of 10 or moreprojects because we treat each job as if it were the first.

Take a look at our work It speaks for itself!

Read more from the original source:
Church Construction and Steel Church Buildings | Canco

Specializing in Home Restoration & Insurance Repair

Specializing in Home Restoration & Insurance Repair

Specializing in Home Restoration & Insurance Repair

Specializing in Home Restoration & Insurance Repair

When accidents happen to your home, Western Skies Restoration is here to help. Water and fire damage to your home can be distressing and expensive. However, with the skilled and caring restoration contractors at Western Skies, your home will look like new.

Western Skies Restoration is an insurance repair and restoration contractor that also helps with renovation work. Western Skies has a stellar reputation of being fair, ethical, honest, qualified, and centered on customers. Our main services for restoration are fire and water damage, and we offer other services with remodeling. Our specialty is insurance repair, where we work directly with insurance companies to provide you the restoration you need.

In sixteen years of operation, Western Skies Restoration knows our customers matter most. We understand that you have concerns and questions when it comes to home restoration. Were here to answer them and do the high quality work that youll expect. With each client we have, we take a personal approach to the restoration work needed. Our owner, Mike Bevacco, oversees each job in progress to ensure quality and honesty on the job.

With this dedication, we offer several benefits: 1) All work we perform has a 5-year warranty, which is 3 years longer than other restoration companies, 2) all employees we hire have a background check through Crimshield, and 3) we havent had a single complaint filed against our company for 15 years, which has led to an A+ rating on BBB.

To this effect, we also do the following:

Western Skies Restoration is on every insurance providers list. If you have a high deductible for your plan, we make sure that you get the most amount of work for the least amount of money. Our work is speedy, dependable, quality, and trustworthy.

Call us today for an estimate on home restoration in Phoenix, AZ at 480-507-9292!

See the original post here:
Remake Your Home with Home Restoration in Phoenix, AZ

Colorado log home chinking, log staining, log home restoration, media blasting. Service area includes Summit / Park County and other mountain locations west of Denver, Colorado. Log Home Finishing only uses the best log home stains from Sashco and Permachnink log home supply to seal your log home cabin.

Log Home Finishing specializes in log home and wood preparation. Before applying finish old log stain and UV damage from the logs are removed via power washing, media blasting and buffing your logs. Media blasting a log home always requires additional prep work before applying log finish, like power washing and sanding to avoid pitted wood effect and uneven stain adherence. Log Home care help.

If you have an older log cabin we can remove old chinking and strip stain and help you determine any additional work needed on your log home cabin. Additional consultation services may include thermography or thermal imaging of your log home to pinpoint leaks, find water damage, and get a thermal view of your log home. Rotten log repair with Abatron Wood Epox is a great way to preserve a log home. Log Home Finishing for your log home maintenance and log home restoration contractor in Breckenridge, Colorado.

Colorado Log Home Finishing has the best equipment in the High Country to get your job done. Our Sashco Snorkler for log home chinking applications, Jordan Hot Water Pressure Washer for chemical stripping old stain, and Surface Teck Media Blast for cob blasting log home cabins combined with years of log home repair experience is what you need for your log home restoration. Projects completed in Frisco, CO Steamboat Springs, CO Bailey, CO Breckenridge, CO Vail, CO

Contact Form

Read the original here:
Log Home Restoration - Log Home Care

Maintenance Free

Vinyl siding is tough, durable and maintenance free. It needs nothing more than a rinse from a hose to keep it clean and you never have to paint again. It's a great way to keep your house maintenance free and enhance the look of it.

There are certain materials that you can leave on the house if it's in good shape. However, the best job that money can buy would be to take off what's there, get back to the sheathing, put a house wrap on it, foam and then apply the vinyl siding.

When measuring your house for siding, do not deduct for windows or doors. Measure it like it's a square from the width -- from the bottom to the top of the peak.

Hanging it from one ladder is extremely difficult. You are dealing with very flimsy pieces. You need at least two ladders and a trusted friend, and if you can get a scaffolding system, that would work even better.

Snap a level line all the way around your house and make sure it's level. The first piece of vinyl you're going to hang is on the starter strip. It will be made of aluminum and it usually comes about 3 inches in width and 12 feet long. It is important to check your level every four or five courses by putting a level on the siding.

When cutting vinyl siding, it's usually to go into a corner. You need to leave at least 1/4". Whatever your measurement is, take at least 1/4" or 1/8" on both sides for the panel to slide back and forth. If you don't cut your siding short, when it expands in the summer it's going to buckle.

Always start from the back of the house and work forward toward the street, so seams are now facing the backyard. Make sure you overlap where you have a joint only when necessary. It's important to use the factory edge at the seams. It assures that you get the proper overlap.

This is one of the most crucial steps in installing vinyl siding. Never nail the siding to your house, hang it. Set your nails about 1/8" to 1/16" away from the wall. You are not going to set it hard. This will allow movement when it expands or contracts.

When heat builds up in your attic, it can warp your roof. Let that heat escape and keep an even temperature. Vent out your attic by installing perforated soffits with gable vents. Another added bonus would be to get ridge vents that will add airflow through the attic space.

Your grill will be your siding's worst enemy. The heat it generates will damage your siding and you will have to replace it. Keep the barbecue as far from your siding as possible.

Originally posted here:
Tips on Installing Vinyl Siding | Home Exterior Projects ...

Thanks to better graining and deeper profiles that cast wider shadows, some vinyl, plastic, and synthetic siding gives you the look of wood for a fraction of what you'd pay for the real thing.

Buy the Right Amount An installer will calculate how much siding your home needs, but you can make a rough estimate without climbing a ladderand avoid overpaying someone you hire. Simply multiply the height times the width of each rectangular section of your house in feet, going by what you can measure from the ground, to determine its area. Multiply the approximate height and width of gables and other triangular surfaces and divide each total by two. Then add all the totals. To allow for waste, don't subtract for doors, windows, or other areas that won't be covered. Finally, divide the total square footage by 100 to estimate how many squares of siding you'll need. A square represents 100 square feet.

Get It Installed Right We recommend having a professional install your siding. If the old siding is sound, new siding can go over it. But rotted wood siding should be replaced and the wall behind it checked for damagesomething that could save you tens of thousands of dollars in structural repairs later on. If the old siding is removed, install a moisture barrier beneath the new siding, and add flashing around doors and windows. Fasteners should attach to wall studs, not just the sheathing. The installer should center the fasteners in the slots and leave a gap as thick as a dime between the panel and the fastener heads to allow for expansion and contraction.

Make It Last You can extend the useful life of your siding with simple maintenance and repairs. Siding is susceptible to leaks, especially where it meets windows and doors. A $5 tube of caulk could ultimately save you thousands of dollars in structural repairs. If you live in a region with cold winters, check the siding under the eaves for water stains, possibly a sign of ice damming. Adding attic insulation and sealing any gaps around pipes and ducts into the attic may help prevent future dammingand may lower your heating and cooling bills as well.

View original post here:
Best Siding Buying Guide - Consumer Reports