Home Builder Developer - Interior Renovation and Design

Everybody always wants to know what does it cost to pave my driveway or what does it cost to pave my parking lot?

So if you are looking to get a ball park estimate on how much it will cost to pave your driveway or parking we can can help give you good idea here.

1st of all please note that asphalt paving is substantially cheaper than concrete. Asphalt paving is close to 1/3 of the cost of concrete.

1 Rip Out The Old Driveway or Grass Smooth Surface

We would install 6 inches of stone 2 inches of binder, which is a binder course and and 1 1/2 inch of the smooth stuff which is called ID2 top. This ranges about $3.50 a square foot for everything.

2 Ripping out old driveway and Hauling Away

Installing a stone base the 3 inches of ID2 top. This ranges around $2.50 a square foot

3 Resurfacing Existing

Basically we would cut out in front of your garage. Then add 2 inches on top of your entire driveway. Then as we meet your garage we would use the cut out to bring it level with your garage. This costs about $1.50 per square foot.

If there are a lot of cracks or it is rutted out or there are dips in the driveway, that means the base is bad. We will then need to rip it out and install a new stone base to give a solid starting point.

We understand most people want the lowest cost or to at least have confidence you ate getting good value for the money your spending.

Of course each job has its own set of variables that influence the price. Give us a call or use our contact form and we will be happy to get your a quote tailored to your exact needs. Thanks WIllie

How Much is Paving A Driveway? was last modified: August 2nd, 2014 by William Stanley

See the original post here:
How Much is Paving A Driveway? | What is the Cost of ...

Custom Modular Home Builders Northwest Iowa Your one-stop shop, from building your home to furnishing it! Vander Berg Homes, your custom modular home builders in Northwest Iowa, is an Independent Stratford Homes Builder, constructing high-quality, stick-built modular homes since 1984. Our quality craftsmanship, is trusted all over Northwest Iowa and in the surrounding region, including Sioux Center, Spencer, Okoboji, Le Mars, Remsen, and Orange City. Vander Berg Homes works closely with customers from turning the initial floor plans into customized plans just for you, to the final details, offering a personal, comprehensive approach to the entire building process. Vander Berg Homes maintains a reputation for quality craftsmanship which is evident in their well built homes. Going above and beyond quality craftsmanship, Vander Berg Homes is cost effective and always provides up-front pricing. Combined with the services of their sister company, Vander Berg Furniture, the Vander Berg Homes experience extends beyond home construction, basements, plumbing, and electrical to include furniture, flooring, and complimentary interior design services a complete home construction and home furnishing experience all-in-one. For streamlined decision-making, an efficient building process, and a home built with only the highest quality materials and workmanship, build with Vander Berg Homes!

Visit link:
Custom Modular Home Builders Northwest Iowa

Air Duct Cleaning Heating and Cooling

Water Heaters, Humidifiers, etc.

Welcome to West Michigan Air Duct and HVAC located in Jenison, MI and serving the Grand Rapids area. We offerProfessional air duct cleaning for $239!We specialize in air duct cleaning, carpet cleaning, dryer vent cleaning, window cleaning and cleanout services. Every job starts and ends with photo inspections. We want every homeowner to be satisfied with our service so we share before and after photos so you can see what we did. Heating, ventilation and air conditioning systems collect a variety of pollutants including mold, dust and bacteria. Once the air ducts are cleaned, the air quality improves greatly. If you recently moved into a new home or if you have been in your home for a while, contact us for service!

Air Duct Cleaning $239! Up to 12 air ducts cleaned!

What are the benefits of air duct cleaning? Eliminate pet hair, dander and mold due to water damage. Reduce allergies and contaminants caused by smoking, construction work or fungi. Improve your home life when you improve your indoor air quality.

Call West Michigan Air Duct and HVAC to benefit from cleaner air! Read about our services.

Go here to see the original:
West Michigan Air Duct Cleaning - $239 for 12 vents cleaned ...

WHAT ARE THE ADVANTAGES OF HAVING YOUR AIR DUCTS CLEANED?

We at City Carpet Cleaners, believe that cleaning your air ducts is actually quite important, most companies and even homeowners dont understand just how important it is to having clean ducts. But what precisely is the benefit? The health benefits for the people who are currently making use of the space could be greatly improved, that is if the people are suffering allergies, in any case youre less likely to actually contract a harmful disease.

After you hire City Carpet Cleaners youll quickly find out that there are no cleaning crews like ours, we know how to get the job done, and were considered one of Houstons most highly rated cleaners. But, were in no way healthcare specialists, and we understand that cleaning your air ducts might not affect your health in any positive way. Nevertheless, youll always have to consider if the indoor air quality is actually decreasing.

Here is the original post:
Air Duct Cleaning - City Carpet Cleaners

Your air ducts can harbor mold, mildew and all kinds of other undesirables, and those unwelcome particulates can make their way into the air you breathe every time you turn on your air conditioner or heater. If you're living in Atlanta, there's great news: Kiwi air duct cleaning services and their 30 years of experience within the industry can help with pet dander, allergy issues and more.

Clean air ducts mean clean, breathable air in your home. Kiwi air duct cleaning Atlanta uses high-powered, commercial-strength vacuums with fixed brushes to remove dirt and debris from your home's air ducts. That means you and your family don't have to worry about airborne contaminants polluting the air you breathe while you're at home.

Kiwi's air duct cleaning process is incredibly thorough. Our total-system special air duct cleaning ensures that every corner of your air handling system is free from mold and mildew, as well as free from dust, dirt and debris.

If your heating and cooling system isn't new, or if it has been exposed to humidity or moisture, you may need a professional air duct cleaning right away. Unfortunately, some Atlanta homes have heating and cooling systems that aren't installed properly; systems that are poorly put-together can harbor even more contaminants and cause more problems, so those need more frequent cleanings as well.

Polluted air is often a direct result of moisture in your heating and cooling system. A damp environment is the ideal place for trapped dirt and debris to harbor mold and mildew.

Moisture sneaks into your air ducts from humidity, the presence of any amount of water, and even the ordinary condensation that comes with normal temperature fluctuations. When mold grows in your air ducts, it releases tiny spores into the air; these spores travel right through your air ducts and land in your home. They can take root on your furniture, causing odors and damage, or creep down your walls and cause discoloration. Mold spores can become embedded in your carpets or get sprinkled all over your bed. Worst of all, you're breathing them in all day, every day.

When mold spores land, they don't die. They keep growing. These difficult little spores can be the root of allergies and serious health problems.

Clean air is best for healthy people and those with compromised immune systems; in fact, people with compromised immune systems are most vulnerable to mold sensitivity.

Since 1987, Kiwi has been providing all sorts of cleaning services. Our expert technicians will evaluate your air duct system and choose one of many methods to perform the most in-depth cleaning. We also use antimicrobial treatments that prevent mold from taking up residence in your duct system, and we guarantee against it for two years after your service. An additional 30-day clean carpet guarantee on our services will keep you doubly safe. The end result: clean, debris-free and soot-free air ducts that can't harbor mold, mildew or dangerous bacteria. Call us at 770-573-6079 so we can help you and your family breathe easier.

KIWI Air Duct Cleaning Atlanta, GA 30302, 30303, 30304, 31195, 31196, 39901 770-573-6079

John M. (Atlanta, GA, 30311) "We used Kiwi for air duct cleaning twice in the past and we were very pleased with the services they provided. The technicians were knowledgeable, answered our questions about the procedures and they did a thorough job. We have invited them to our home for the third time to clean our air ducts again."

The rest is here:
Air Duct Cleaning in Atlanta Kiwi Services

Ducts are used in heating, ventilation, and air conditioning (HVAC) to deliver and remove air. The needed airflows include, for example, supply air, return air, and exhaust air.[1]Ducts commonly also deliver ventilation air as part of the supply air. As such, air ducts are one method of ensuring acceptable indoor air quality as well as thermal comfort.

A duct system is also called ductwork. Planning (laying out), sizing, optimizing, detailing, and finding the pressure losses through a duct system is called duct design.[2]

Ducts can be made out of the following materials:

Galvanized mild steel is the standard and most common material used in fabricating ductwork because the zinc coating of this metal prevents rusting and avoids cost of painting. For insulation purposes, metal ducts are typically lined with faced fiberglass blankets (duct liner) or wrapped externally with fiberglass blankets (duct wrap). When called for, a double walled duct is used. This will usually have an inner perforated liner, then a 12" layer of fiberglass insulation contained inside an outer solid pipe.

Rectangular ductwork commonly is fabricated to suit by specialized metal shops. For ease of handling, it most often comes in 4' sections (or joints). Round duct is made using a continuous spiral forming machine which can make round duct in nearly any diameter when using the right forming die and to any length to suite, but the most common stock sizes range evenly from 4" to 24" with 6"-12" being most commonly used. Stock pipe is usually sold in 10' joints. There are also 5' joints of non-spiral type pipe available, which is commonly used in residential applications.

Aluminium ductwork is lightweight and quick to install. Also, custom or special shapes of ducts can be easily fabricated in the shop or on site.

The ductwork construction starts with the tracing of the duct outline onto the aluminium preinsulated panel. The parts are then typically cut at 45, bent if required to obtain the different fittings (i.e. elbows, tapers) and finally assembled with glue. Aluminium tape is applied to all seams where the external surface of the aluminium foil has been cut. A variety of flanges are available to suit various installation requirements. All internal joints are sealed with sealant.

Aluminum is also used to make round spiral duct, but it is much less common than galvanized steel.

Traditionally, air ductwork is made of sheet metal which was installed first and then lagged with insulation. Today, a sheet metal fabrication shop would commonly fabricate the galvanized steel duct and insulate with duct wrap prior to installation. However, ductwork manufactured from rigid insulation panels does not need any further insulation and can be installed in a single step. Both polyurethane and phenolic foam panels are manufactured with factory applied aluminium facings on both sides. The thickness of the aluminium foil can vary from 25 micrometres for indoor use to 200 micrometres for external use or for higher mechanical characteristics. There are various types of rigid polyurethane foam panels available, including a water formulated panel for which the foaming process is obtained through the use of water and CO2 instead of CFC, HCFC, HFC and HC gasses. Most manufacturers of rigid polyurethane or phenolic foam panels use pentane as foaming agent instead of the aforementioned gasses.

A rigid phenolic insulation ductwork system is listed as a class 1[clarification needed] air duct to UL 181 Standard for Safety.

Fiberglass duct board panels provide built-in thermal insulation and the interior surface absorbs sound, helping to provide quiet operation of the HVAC system.

The duct board is formed by sliding a specially-designed knife along the board using a straightedge as a guide. The knife automatically trims out a groove with 45 sides which does not quite penetrate the entire depth of the duct board, thus providing a thin section acting as a hinge. The duct board can then be folded along the groove to produce 90 folds, making the rectangular duct shape in the fabricator's desired size. The duct is then closed with outward-clinching staples and special aluminum or similar metal-backed tape.

Flexible ducts (also known as flex) are typically made of flexible plastic over a metal wire coil to shape a tube. They have a variety of configurations. In the United States, the insulation is usually glass wool, but other markets such as Australia, use both polyester fibre and glass wool for thermal insulation. A protective layer surrounds the insulation, and is usually composed of polyethylene or metalised PET. It is commonly sold boxes containing 25' of duct compressed into a 5' length. It is available in diameters ranging from as small as 4" to as big as 18", but the most commonly used are even sizes ranging from 6" to 12".

Flexible duct is very convenient for attaching supply air outlets to the rigid ductwork. It is commonly attached with long zip ties or metal band claps. However, the pressure loss is higher than for most other types of ducts. As such, designers and installers attempt to keep their installed lengths (runs) short, e.g. less than 15 feet or so, and try to minimize turns. Kinks in flexible ducting must be avoided. Some flexible duct markets prefer to avoid using flexible duct on the return air portions of HVAC systems, however flexible duct can tolerate moderate negative pressures. The UL181 test requires a negative pressure of 200 Pa.

This is actually an air distribution device and is not intended as a conduit for conditioned air. The term fabric duct is therefore somehow misleading; fabric air dispersion system would be the more definitive name. However, as it often replaces hard ductwork, it is easy to perceive it simply as a duct. Usually made of polyester material, fabric ducts can provide a more even distribution and blending of the conditioned air in a given space than a conventional duct system. They may also be manufactured with vents or orifices.

Fabric ducts are available in various colours, with options for silk screening or other forms of decoration, or in porous (air-permeable) and non-porous fabric. The determination which fabric is appropriate (i.e. air-permeable or not) can be made by considering if the application would require an insulated metal duct. If so, an air-permeable fabric is recommended because it will not commonly create condensation on its surface and can therefore be used where air is supplied below the dew point. Material that eliminates moisture may be healthier for the occupants. It can also be treated with an anti-microbial agent to inhibit bacterial growth. Porous material also tends to require less maintenance as it repels dust and other airborne contaminants.

Fabric made of more than 50% recycled material is also available, allowing it to be certified as green product. The material can also be fire retardant, which means that the fabric can still burn, but will extinguish when the heat source is removed.

Fabric ducts are not rated for use in ceilings or concealed attic spaces. However, products for use in raised floor applications are available. Fabric ducting usually weighs less than other conventional ducting and will therefore put less stress on the building's structure. The lower weight allows for easier installation.

Fabric ducts requires a minimum of certain range of airflow and static pressure in order for it to work.

The finish for external ductwork exposed to the weather can be sheet steel coated with aluminium or an aluminium/zinc alloy, a multilayer laminate, a fibre reinforced polymer or other waterproof coating.

Besides the ducts themselves, complete ducting systems contain many other components.

A duct system often begins at an air handler. The blowers in the air handler can create substantial vibration, and the large area of the duct system would transmit this noise and vibration to the inhabitants of the building. To avoid this, vibration isolators (flexible sections) are normally inserted into the duct immediately before and after the air handler. The rubberized canvas-like material of these sections allows the air handler to vibrate without transmitting much vibration to the attached ducts. The same flexible section can reduce the noise that can occur when the blower engages and positive air pressure is introduced to the ductwork.

Downstream of the air handler, the supply air trunk duct will commonly fork, providing air to many individual air outlets such as diffusers, grilles, and registers. When the system is designed with a main duct branching into many subsidiary branch ducts, fittings called take-offs allow a small portion of the flow in the main duct to be diverted into each branch duct. Take-offs may be fitted into round or rectangular openings cut into the wall of the main duct. The take-off commonly has many small metal tabs that are then bent to attach the take-off to the main duct. Round versions are called spin-in fittings. Other take-off designs use a snap-in attachment method, sometimes coupled with an adhesive foam gasket for improved sealing. The outlet of the take-off then connects to the rectangular, oval, or round branch duct.

Ducts, especially in homes, must often allow air to travel vertically within relatively thin walls. These vertical ducts are called stacks and are formed with either very wide and relatively thin rectangular sections or oval sections. At the bottom of the stack, a stack boot provides a transition from an ordinary large round or rectangular duct to the thin wall-mounted duct. At the top, a stack head can provide a transition back to ordinary ducting while a register head allows the transition to a wall-mounted air register.

Ducting systems must often provide a method of adjusting the volume of air flow to various parts of the system. Volume control dampers (VCDs; not to be confused with smoke/fire dampers) provide this function. Besides the regulation provided at the registers or diffusers that spread air into individual rooms, dampers can be fitted within the ducts themselves. These dampers may be manual or automatic. Zone dampers provide automatic control in simple systems while variable air volume (VAV) allows control in sophisticated systems.

Smoke and fire dampers are found in ductwork where the duct passes through a firewall or firecurtain.

Smoke dampers are driven by a motor, referred to as an actuator. A probe connected to the motor is installed in the run of the duct and detects smoke, either in the air which has been extracted from or is being supplied to a room, or elsewhere within the run of the duct. Once smoke is detected, the actuator will automatically close the smoke damper until it is manually re-opened.

Fire dampers can be found in the same places as smoke dampers, depending on the application of the area after the firewall. Unlike smoke dampers, they are not triggered by any electrical system (which is an advantage in case of an electrical failure where the smoke dampers would fail to close). Vertically mounted fire dampers are gravity operated, while horizontal fire dampers are spring powered. A fire damper's most important feature is a mechanical fusible link which is a piece of metal that will melt or break at a specified temperature. This allows the damper to close (either from gravity or spring power), effectively sealing the duct, containing the fire, and blocking the necessary air to burn.

Turning vanes are installed inside of ductwork at changes of direction (e.g. at 90 turns) in order to minimize turbulence and resistance to the air flow. The vanes guide the air so it can follow the change of direction more easily.

Plenums are the central distribution and collection units for an HVAC system. The return plenum carries the air from several large return grilles (vents) or bell mouths to a central air handler. The supply plenum directs air from the central unit to the rooms which the system is designed to heat or cool. They must be carefully planned in ventilation design.[why?]

While single-zone constant air volume systems typically do not have these, multi-zone systems often have terminal units in the branch ducts. Usually there is one terminal unit per thermal zone. Some types of terminal units are VAV boxes (single or dual duct), fan-powered mixing boxes (in parallel or series arrangement), and induction terminal units. Terminal units may also include a heating or cooling coil.

Air terminals are the supply air outlets and return or exhaust air inlets. For supply, diffusers are most common, but grilles, and for very small HVAC systems (such as in residences) registers are also used widely. Return or exhaust grilles are used primarily for appearance reasons, but some also incorporate an air filter and are known as filter returns.[3]

The position of the U.S. Environmental Protection Agency (EPA) is that "If no one in your household suffers from allergies or unexplained symptoms or illnesses and if, after a visual inspection of the inside of the ducts, you see no indication that your air ducts are contaminated with large deposits of dust or mold (no musty odor or visible mold growth), having your air ducts cleaned is probably unnecessary."[4] A thorough duct cleaning done by a professional duct cleaner will remove dust, cobwebs, debris, pet hair, rodent hair and droppings, paper clips, calcium deposits, children's toys, and whatever else might collect inside. Ideally, the interior surface will be shiny and bright after cleaning. Insulated fiber glass duct liner and duct board can be cleaned with special non-metallic bristles. Fabric ducting can be washed or vacuumed using typical household appliances.

Duct cleaning may be personally justifiable for that very reason: occupants may not want to have their house air circulated through a duct passage that is not as clean as the rest of the house. However, duct cleaning will not usually change the quality of the breathing air, nor will it significantly affect airflows or heating costs.

Cleaning of the duct system may be necessary if:

In commercial settings, regular inspection of ductwork is recommended by several standards. One standard recommends inspecting supply ducts every 12 years, return ducts every 12 years, and air handling units annually.[5] Another recommends visual inspection of internally lined ducts annually[6] Duct cleaning should be based on the results of those inspections.

Inspections are typically visual, looking for water damage or biological growth.[5][6][7] When visual inspection needs to be validated numerically, a vacuum test (VT) or deposit thickness test (DTT) can be performed. A duct with less than 0.75mg/100m2 is considered to be clean, per the NADCA standard.[7] A Hong Kong standard lists surface deposit limits of 1g/m2 for supply and return ducts and 6g/m2 for exhaust ducts, or a maximum deposit thickness of 60m in supply and return ducts, and 180m for exhaust ducts.[8] Another UK standard recommends ducts cleaning if measured bacterial content is more than 29 colony forming units (CFU) per 10cm2; contamination is classified as "low" below 10 CFU/cm2, "medium" at up to 20 CFU/cm2, and "high" when measured above 20 CFU/cm2.[9]

Air pressure combined with air duct leakage can lead to a loss of energy in a HVAC system. Sealing leaks in air ducts reduces air leakage, optimizes energy efficiency, and controls the entry of pollutants into the building. Before sealing ducts it is imperative to ensure the total external static pressure of the duct work, and if equipment will fall within the equipment manufacturer's specifications. If not, higher energy usage and reduced equipment performance may result.

Commonly available duct tape should not be used on air ducts (metal, fiberglass, or otherwise) that are intended for long-term use. The adhesive on so called duct tape dries and releases with time. A more common type of duct sealant is a water-based paste that is brushed or sometimes sprayed on the seams when the duct is built. Building codes and UL standards call for special fire-resistant tapes, often with foil backings and long lasting adhesives.

Signs of leaky or poorly performing air ducts include:

More here:
Duct (flow) - Wikipedia

Have you found yourself or family members more prone to allergic reactions and flare-ups recently? Does it always seem like you have nasal irritations, throat congestion or watery eyes?

If so, you might be inhaling pollutants while inside the safety of your own home and not be aware of it. Your ventilation system could be breeding ground for dust mites and a receptacle for millions of dust particles, pollen, dander, mold and mildew spores. When you inhale the air inside your house you also inhale these contaminants, making you that much more susceptible to respiratory illnesses and allergy flare-ups.

This increased concentration of dust in your ventilation systems can lead to the environment inside your home being up to 100 times more polluted than the outside environment. Whether youre at home, at school, in a mall or any other enclosed space the air contains contaminants that are invisible to the naked eye.

Atlanta Air Experts crew get to work cleaning the entire system, not just vacuuming around the registers and vents. Our crew uses patented equipment to reach through the vents and right in to the ductwork. No part of the system is left untouched, and all dust and grime is sucked out and collected back into the equipment for disposal..

We follow this vacuuming process by using an EPA registered fog agent that kills all traces of germs and bacteria, mold and mildew spores that may still be lurking deep inside your system. Now the air in your home is fresh, clean and pure - the way it should be!

Read more here:
Air Duct Cleaning Atlanta-Atlanta Air Experts Residential ...

Most homeowners don't know that they need routine air duct cleanings. When was the last time you had maintenance done on the air ducts in your Dallas home? If you can't remember, chances are good that they're filled with dust, lint, mildew or even mold. Kiwi has been in business for 28 years, and air ducts are one of our specialties.

Every home in Dallas needs a periodic air duct cleaning to address the:

Sneeze. Cough. Wheeze. That's what the home of an allergy sufferer sounds like around the clock. In Dallas, where allergens are prevalent nearly all year, it's usually advisable to have routine air duct cleanings. People who have lung conditions and breathing difficulties, including asthma, can benefit from frequent cleanings because they help to prevent the spread of contaminants.

The Kiwi air duct cleaning process is intensive. It includes a complete cleaning, an application of antimicrobial treatment, and filter installation. However, not every home needs a full-system cleaning. Some homes simply need individual ducts vacuumed and cleaned out, an application of antimicrobial treatment and an overall brushing-up. We also offer dryer vent cleaning that can mitigate the risk of fire and help your machine perform more efficiently.

Our services will help remove allergens, odors, mold and mildew from your Dallas-area home. When your air ducts are cleaned, you'll even enjoy lower energy bills and save money on future repairs. It makes sense to get your air ducts cleaned periodically, but only if you hire Dallas' best.

We back our full-system air duct cleaning with a two-year antimicrobial guarantee, which protects you from the regrowth of mold and mildew for a full 24 months.

Our intensive air duct cleaning treatments lift dirt and debris from the nooks and crannies of your system. We'll clean all of the air handling components in your system and then wash all of your vent covers by hand. We'll vacuum out all of the undesirables nesting in your air duct system, and then we'll apply our people-friendly, pet-friendly antimicrobial solution. Our experts will clean all of the vent areas, as well as your filter, and we'll replace everything when we're done.

Call us at 214-379-4903 and our Dallas air duct cleaning team will be happy to schedule an appointment at your earliest convenience.

Air Duct License # TACLBO15148E

KIWI Air Duct Cleaning 17304 Preston Rd Ste 800 Dallas, TX 75252 214-379-4903

Kelly B. (Dallas, TX, 75238) "I had Kiwi out to clean my air vents and they were very professional, showed up when they said they would, and did a very thorough job! So much so that I am having them out again!" View Larger Map

Go here to read the rest:
Air Duct Cleaning Services in Dallas, TX KiwiServices.com

Advanced Furnace & Air Duct Cleaning Serving All of New Jersey for Over 50 Years!

Are you sneezing in your home? Do you have to dust your furniture all the time? Looking for professional duct cleaning NJ? Advanced Air Duct Cleaning a NJ based company is the answer. A proper duct cleaning is more than a basic vacuuming. Learn More

A healthier, more productive workplace. A healthy business starts with the quality of air your employees and customers breathe. If your workplace furnace, air conditioning system and vents arent clear, youll pay the price with more employee sick time, fewer customers and costly OSHA fines. We can help. Learn More

Heavy-duty air cleaning. For large-scale industrial projects, Advanced Furnace & Air Duct Cleaning NJ has the experience, equipment and technology needed to get the job done. We have extensive experience in cleaning dust collection systems and superstructureswith the capacity to successfully service a 40-story building! Learn More

We take pride in our reputation and our quality of work reflects this. As specialists in duct cleaning and odor removal and have served the insurance restoration industry with unparalleled professional service since 1964. We show up on time and perform our job quickly and efficiently. We have cleaned over 38,000 homes affected by mold, fires, floods, soot, sewage back-ups, mold, tear gas and fire extinguisher dust. We are members of NADCA (National Air Duct Cleaners Association), IAQA (the Indoor Air Quality Association), and HFMSNJ (The Healthcare Facilities Management Society of New Jersey). Learn More

Read more from the original source:
Air Duct Cleaning NJ, duct cleaning NJ, NJ air duct cleaning ...

Edit Article

Community Q&A

Indoor air ducts need regular cleaning to ensure top performance and effectiveness. Unclean air ducts can harbor viruses, bacteria, and other germ potential, which can harm your health. Moreover, grime and dirt build-up flowing through your indoor air ducts can circulate particles that are potentially damaging or dirtying for your furniture, electronics, and clothing.

1

Prepare a cleaning bucket. Use a small ice cream container or a mini bucket. Fill with warm water and dish detergent. Fill a spray bottle with vinegar. And have mold removal spray on hand in case. Select several rags and find your vacuum cleaner and a flashlight. Place all of these items within reach so that you can use them easily.

2

Locate the air ducts in your home. Some homes have vents high on the walls, others have them located at the base of the walls. Some vents might be located in unusual places; have a good check around to find all of them. Plan to clean each one of these in systematic fashion. Check for anything underneath the duct, such as furniture, hanging pictures, carpet or rugs, decorative items, etc. and move them out of the way or cover them so that they don't get dust, etc. landing on them.

3

Take off the cover for each air duct as you go. The method for doing this will depend on the type of air duct that you have some can be levered off, some need to be screwed off, and some slide off. Consult the manufacturer's instructions if you're not sure.

4

Set up a stable surface to stand on if your vent is high. A ladder, step-stool, stable chair, etc. Make sure that the item is sitting flat and does not wobble under your weight.

5

Use the nozzle of the vacuum cleaner to remove loose dust, fluff, particles, etc. that have built up in the vent corridor. If your vacuum cleaner is heavy and the vent is high up, have someone else hold the vacuum so that you only have to concentrate on the nozzle and cleaning.

6

Using the rag, wipe down the inside walls of the vent area with the warm water and detergent mix. Use the flashlight to check for mold if there is any present, wipe down with the vinegar and if that doesn't do the trick, spray with the mold killing solution, following its instructions. Use a paper towel to clean up after wiping. Allow to dry.

7

Replace the vent cover. Move on to the next vent until all are completed.

Ask a Question

If this question (or a similar one) is answered twice in this section, please click here to let us know.

Loading...

Upload error

Thanks to all authors for creating a page that has been read 84,410 times.

Yes No

Follow this link:
How to Clean an Indoor Air Duct: 7 Steps (with Pictures)