1. How much do handymen typically charge?

Answer: The average cost to hire a plumber isbetween $50 - $100 dollars per hour, but you can find qualified individuals who can perform handyman work for less.

2. How much are typical handyman repair costs?

Answer: The average cost for a repair is around $150 dollars. However, each project is different and costs can range from $100 to repair shevles or install a fixture, to several hundred dollars for repairing doors or other time-consuming tasks.

3. Should handymen be certified or licensed?

Answer: Yes. Each state has their own requirements for licensing and certifications handyman. Be sure tocheck our state licensing toolto review the local handymen guidelines.

4. What questions should I ask a handyman?

Answer: There are severalquestions or things to know before hiring a handymanto do any work in your home.

* Do they have proper licensing?

*Do they charge for estimates?

*Do they provide references?

5. How many handymen are in the US?

Answer: According to theUS Bureau of Labor Statistics in May 2017, there are 1,351,210 handymenemployed in the US. Their average salary is $19.37per hour, with an annual wage of $40,280. California has the most handyman (126,420) with Texas (108,470) following just behind. Alaska has the highest average hourly wage at $24.87per hour.

More here:
Local Handyman Services - Angie's List

As an asphalt paving and repair contractor servicing the entire Nashville, Tennessee area, we have a solution for every paving need you may be facing. We are your full-service asphalt and concrete contractor providing excellent services for both residential and commercial clients. No matter the size of the job large or small, we are ready to tackle any type of asphalt construction project you may have including driveways, parking lots, roads, walking paths, golf cart paths, aviation runways and more. We can do simple patch jobs to full resurfacing. We are committed to providing you with the best customer service in the industry, and we also look forward to making you a lifelong satisfied client.We provide a FREE no obligation written estimates for the work you need to have done. Simply contact us today and we can schedule a time to come meet with you, discuss your project, and detail out the entire project agreement.

We specialize in all areas of Asphalt Paving, Asphalt Milling, Asphalt Repair, Asphalt Resurfacing, Tar and Chip, Sealcoating, Striping, Pavement Maintenance, Concrete construction, and repair. So no matter if you are a homeowner, a property manager, business developer, government agency, retail shopping center, Home Owners Association, or any other type of business, our professional services team will be able to assist you with every paving project large or small.We know many bad paving companies have given the good guys a bad reputation, and we look forward to turning that around by providing the best service in the industry.

Originally posted here:
Asphalt Paving Nashville - Asphalt Paving, Patching ...

We do much more than Sprinkler Systems, Kingwood Sprinkler is also the leader in landscape and outdoor lighting. We have over a decade in professional design and outdoor lighting installation. We offer energy efficient outdoor lighting fixtures to handle both residential and commercial lighting demands. Our design specialists work with each client to ensure their vision comes to light, literally! We can offer expert advice and professional designs that will accentuate beautiful landscapes and pathways allowing you to safely navigate and truly enjoy the outdoors at night.

Outdoor Lighting is like dressing up for a big event. Its highlights and accents particular features that the business or homeowner wants to draw attention too. Kingwood sprinkler realizes every property is unique, so we pay close attention to the features and what YOU vision. This way we can customize to every last detail for an award-winning look. This is why we are the leading provider of high-quality outdoor lighting. Put your trust in a locally owned and family business that cares about getting your landscape lighting just right. Give your home a makeover and improve security with us today.

Kingwood Sprinkler services Kingwood, Humble, Atascocita, The Woodlands, Spring, Cypress, Magnolia, Houston, and many other cities nearby.

Call us today to learn more at (281)612-7870.

Go here to see the original:
Kingwood Sprinkler | Kingwood Sprinkler Repair | Kingwood ...

Prairies are ecosystems considered part of the temperate grasslands, savannas, and shrublands biome by ecologists, based on similar temperate climates, moderate rainfall, and a composition of grasses, herbs, and shrubs, rather than trees, as the dominant vegetation type. Temperate grassland regions include the Pampas of Argentina, Brazil and Uruguay, and the steppe of Ukraine, Russia and Kazakhstan. Lands typically referred to as "prairie" tend to be in North America. The term encompasses the area referred to as the Interior Lowlands of Canada, the United States, and Mexico, which includes all of the Great Plains as well as the wetter, hillier land to the east.

In the U.S., the area is constituted by most or all of the states of North Dakota, South Dakota, Nebraska, Kansas, and Oklahoma, and sizable parts of the states of Montana, Wyoming, Colorado, New Mexico, Texas, Missouri, Iowa, Illinois, Indiana, Wisconsin, and western and southern Minnesota. The Palouse of Washington and the Central Valley of California are also prairies. The Canadian Prairies occupy vast areas of Manitoba, Saskatchewan, and Alberta.

According to Theodore Roosevelt:

Prairie is the French word for meadow, but the ultimate root is the Latin pratum (same meaning).

The formation of the North American Prairies started with the uplift of the Rocky Mountains near Alberta. The mountains created a rain shadow that resulted in lower precipitation rates downwind.[2]

The parent material of most prairie soil was distributed during the last glacial advance that began about 110,000 years ago. The glaciers expanding southward scraped the landscape, picking up geologic material and leveling the terrain. As the glaciers retreated about 10,000 years ago, it deposited this material in the form of till. Wind based loess deposits also form an important parent material for prairie soils.[3]

Tallgrass prairie evolved over tens of thousands of years with the disturbances of grazing and fire. Native ungulates such as bison, elk, and white-tailed deer, roamed the expansive, diverse grasslands before European colonization of the Americas.[4] For 10,000-20,000 years, native people used fire annually as a tool to assist in hunting, transportation, and safety.[5] Evidence of ignition sources of fire in the tallgrass prairie are overwhelmingly human as opposed to lightning.[6] Humans, and grazing animals, were active participants in the process of prairie formation and the establishment of the diversity of graminoid and forbs species. Fire has the effect on prairies of removing trees, clearing dead plant matter, and changing the availability of certain nutrients in the soil from the ash produced. Fire kills the vascular tissue of trees, but not prairie species, as up to 75% (depending on the species) of the total plant biomass is below the soil surface and will re-grow from its deep (upwards of 20 feet[7]) roots. Without disturbance, trees will encroach on a grassland and cast shade, which suppresses the understory. Prairie and widely spaced oak trees evolved to coexist in the oak savanna ecosystem.[8]

In spite of long recurrent droughts and occasional torrential rains, the grasslands of the Great Plains were not subject to great soil erosion. The root systems of native prairie grasses firmly held the soil in place to prevent run-off of soil. When the plant died, the fungi, bacteria returned its nutrients to the soil. These deep roots also help native prairie plants reach water in even the driest conditions. Native grasses suffer much less damage from dry conditions than many farm crops currently grown.[9][10]

Prairie in North America is usually split into three groups: wet, mesic, and dry.[11] They are generally characterized by tallgrass prairie, mixed, or shortgrass prairie, depending on the quality of soil and rainfall.

In wet prairies, the soil is usually very moist, including during most of the growing season, because of poor water drainage. The resulting stagnant water is conducive to the formation of bogs and fens. Wet prairies have excellent farming soil. The average precipitation is 1030 inches (250760mm) a year.

Mesic prairie has good drainage, but good soil during the growing season. This type of prairie is the most often converted for agricultural usage; consequently, it is one of the most endangered types of prairie.

Dry prairie has somewhat wet to very dry soil during the growing season because of good drainage in the soil. Often, this prairie can be found on uplands or slopes. Dry soil usually doesn't get much vegetation due to lack of rain.[12] This is the dominant biome in the Southern Canadian agricultural and climatic region known as Palliser's Triangle. Once thought to be completely unarable, the Triangle is now one of the most important agricultural regions in Canada thanks to advances in irrigation technology. In addition to its very high local importance to Canada, Palliser's Triangle is now also one of the most important sources of wheat in the world as a result of these improved methods of watering wheat fields (along with the rest of the Southern prairie provinces which also grow wheat, canola and many other grains). Despite these advances in farming technology, the area is still very prone to extended periods of drought, which can be disastrous for the industry if it is significantly prolonged.[13] An infamous example of this is the Dust Bowl of the 1930s, which also hit much of the United States great plains ecoregion - contributing greatly to the Great Depression.[13]

Nomadic hunting has been the main human activity on the prairies for the majority of the archaeological record. This once included many now-extinct species of megafauna.

After the other extinction, the main hunted animal on the prairies was the plains bison. Using loud noises and waving large signals, Native peoples would drive bison in fenced pens called (buffalo pounds) to be killed with bows and arrows or spears, or drive them off a cliff (called a buffalo jump), to kill or injure the bison en masse. The introduction of the horse and the gun greatly expanded the killing power of the plains Natives. This was followed by the policy of indiscriminate killing by European Americans and Canadians, and caused a dramatic drop in bison numbers from millions to a few hundred in a century's time, and almost caused their extinction.

The very dense soil plagued the first European settlers who were using wooden plows, which were more suitable for loose forest soil. On the prairie, the plows bounced around, and the soil stuck to them. This problem was solved in 1837 by an Illinois blacksmith named John Deere who developed a steel moldboard plow that was stronger and cut the roots, making the fertile soils ready for farming.

The tallgrass prairie has been converted into one of the most intensive crop producing areas in North America. Less than one tenth of one percent (<0.09%) of the original landcover of the tallgrass prairie biome remains.[14] States formerly with landcover in native tallgrass prairie such as Iowa, Illinois, Minnesota, Wisconsin, Nebraska, and Missouri have become valued for their highly productive soils and are included in the Corn Belt. As an example of this land use intensity, Illinois and Iowa rank 49th and 50th, out of 50 US states, in total uncultivated land remaining.[citation needed]

Drier shortgrass prairies were once used mostly for open-range ranching. But the development of the barbed wire in the 1870s, and improved irrigation techniques, means that this region has mostly been converted to cropland and small fenced pasture as well.

Research, by David Tilman, ecologist at the University of Minnesota, suggests that, "Biofuels made from high-diversity mixtures of prairie plants can reduce global warming by removing carbon dioxide from the atmosphere. Even when grown on infertile soils, they can provide a substantial portion of global energy needs, and leave fertile land for food production."[15] Unlike corn and soybeans, which are both directly and indirectly major food crops, including livestock feed, prairie grasses are not used for human consumption. Prairie grasses can be grown in infertile soil, eliminating the cost of adding nutrients to the soil. Tilman and his colleagues estimate that prairie grass biofuels would yield 51 percent more energy per acre than ethanol from corn grown on fertile land.[15] Some plants commonly used are lupine, big bluestem (turkey foot), blazing star, switchgrass, and prairie clover.

Because rich and thick topsoil made the land well suited for agricultural use, only 1% of tallgrass prairie remains in the U.S. today.[16] Short grass prairie is more abundant.

Significant preserved areas of prairie include:

Virgin prairie refers to prairie land that has never been plowed. Small virgin prairies exist in the American Midwestern states and in Canada. Restored prairie refers to a prairie that has been reseeded after plowing or other disturbance.

A prairie garden is a garden primarily consisting of plants from a prairie.

The originally treeless prairies of the upper Mississippi basin began in Indiana, and extended westward and north-westward, until they merged with the drier region known as the Great Plains. An eastward extension of the same region, originally tree-covered, extended to central Ohio. Thus, the prairies generally lie between the Ohio and Missouri rivers on the south and the Great Lakes on the north. The prairies are a contribution of the glacial period. They consist for the most part of glacial drift, deposited unconformably on an underlying rock surface of moderate or small relief. Here, the rocks are an extension of the same stratified Palaeozoic formations already described as occurring in the Appalachian region and around the Great Lakes. They are usually fine-textured limestones and shales, lying horizontal. The moderate or small relief that they were given by mature preglacial erosion is now buried under the drift.

The greatest area of the prairies, from Indiana to North Dakota, consists of till plains, that is, sheets of unstratified drift. These plains are 30, 50 or even 100ft (up to 30m) thick covering the underlying rock surface for thousands of square miles except where postglacial stream erosion has locally laid it bare. The plains have an extraordinarily even surface. The till is presumably made in part of preglacial soils, but it is more largely composed of rock waste mechanically transported by the creeping ice sheets. Although the crystalline rocks from Canada and some of the more resistant stratified rocks south of the Great Lakes occur as boulders and stones, a great part of the till has been crushed and ground to a clayey texture. The till plains, although sweeping in broad swells of slowly changing altitude, often appear level to the eye with a view stretching to the horizon. Here and there, faint depressions occur, occupied by marshy sloughs, or floored with a rich black soil of postglacial origin. It is thus by sub-glacial aggradation that the prairies have been levelled up to a smooth surface, in contrast to the higher and non-glaciated hilly country just to the south.

The great ice sheets formed terminal moraines around their border at various end stages. However, the morainic belts are of small relief in comparison to the great area of the ice. They rise gently from the till plains to a height of 50, 100 or more feet. They may be one, two or three miles (5km) wide and their hilly surface, dotted over with boulders, contains many small lakes in basins or hollows, instead of streams in valleys. The morainic belts are arranged in groups of concentric loops, convex southward, because the ice sheets advanced in lobes along the lowlands of the Great Lakes. Neighboring morainic loops join each other in re-entrants (north-pointing cusps), where two adjacent glacial lobes came together and formed their moraines in largest volume. The moraines are of too small relief to be shown on any maps except of the largest scale. Small as they are, they are the chief relief of the prairie states, and, in association with the nearly imperceptible slopes of the till plains, they determine the course of many streams and rivers, which as a whole are consequent upon the surface form of the glacial deposits.

The complexity of the glacial period and its subdivision into several glacial epochs, separated by interglacial epochs of considerable length (certainly longer than the postglacial epoch) has a structural consequence in the superposition of successive till sheets, alternating with non-glacial deposits. It also has a physiographic consequence in the very different amount of normal postglacial erosion suffered by the different parts of the glacial deposits. The southernmost drift sheets, as in southern Iowa and northern Missouri, have lost their initially plain surface and are now maturely dissected into gracefully rolling forms. Here, the valleys of even the small streams are well opened and graded, and marshes and lakes are rare. These sheets are of early Pleistocene origin. Nearer the Great Lakes, the till sheets are trenched only by the narrow valleys of the large streams. Marshy sloughs still occupy the faint depressions in the till plains and the associated moraines have abundant small lakes in their undrained hollows. These drift sheets are of late Pleistocene origin.

When the ice sheets extended to the land sloping southward to the Ohio River, Mississippi River and Missouri River, the drift-laden streams flowed freely away from the ice border. As the streams escaped from their subglacial channels, they spread into broader channels and deposited some of their load, and thus aggraded their courses. Local sheets or aprons of gravel and sand are spread more or less abundantly along the outer side of the morainic belts. Long trains of gravel and sands clog the valleys that lead southward from the glaciated to the non-glaciated area. Later, when the ice retreated farther and the unloaded streams returned to their earlier degrading habit, they more or less completely scoured out the valley deposits, the remains of which are now seen in terraces on either side of the present flood plains.

When the ice of the last glacial epoch had retreated so far that its front border lay on a northward slope, belonging to the drainage area of the Great Lakes, bodies of water accumulated in front of the ice margin, forming glacio-marginal lakes. The lakes were small at first, and each had its own outlet at the lowest depression of land to the south. As the ice melted further back, neighboring lakes became confluent at the level of the lowest outlet of the group. The outflowing streams grew in the same proportion and eroded a broad channel across the height of land and far down stream, while the lake waters built sand reefs or carved shore cliffs along their margin, and laid down sheets of clay on their floors. All of these features are easily recognized in the prairie region. The present site of Chicago was determined by an Indian portage or carry across the low divide between Lake Michigan and the headwaters of the Illinois River. This divide lies on the floor of the former outlet channel of the glacial Lake Michigan. Corresponding outlets are known for Lake Erie, Lake Huron, and Lake Superior. A very large sheet of water, named Lake Agassiz, once overspread a broad till plain in northern Minnesota and North Dakota. The outlet of this glacial lake, called river Warren, eroded a large channel in which the Minnesota River evident today. The Red River of the North flows northward through a plain formerly covered by Lake Agassiz.

Certain extraordinary features were produced when the retreat of the ice sheet had progressed so far as to open an eastward outlet for the marginal lakes. This outlet occurred along the depression between the northward slope of the Appalachian plateau in west-central New York and the southward slope of the melting ice sheet. When this eastward outlet came to be lower than the south-westward outlet across the height of land to the Ohio or Mississippi river, the discharge of the marginal lakes was changed from the Mississippi system to the Hudson system. Many well-defined channels, cutting across the north-sloping spurs of the plateau in the neighborhood of Syracuse, New York, mark the temporary paths of the ice-bordered outlet river. Successive channels are found at lower and lower levels on the plateau slope, indicating the successive courses taken by the lake outlet as the ice melted farther and farther back. On some of these channels, deep gorges were eroded heading in temporary cataracts which exceeded Niagara in height but not in breadth. The pools excavated by the plunging waters at the head of the gorges are now occupied by little lakes. The most significant stage in this series of changes occurred when the glacio-marginal lake waters were lowered so that the long escarpment of Niagara limestone was laid bare in western New York. The previously confluent waters were then divided into two lakes. The higher one, Lake Erie, supplied the outflowing Niagara River, which poured its waters down the escarpment to the lower, Lake Ontario. This gave rise to Niagara Falls. Lake Ontario's outlet for a time ran down the Mohawk Valley to the Hudson River. At this higher elevation, it was known as Lake Iroquois. When the ice melted from the northeastern end of the lake, it dropped to a lower level, and drained through the St. Lawrence area. This created a lower base level for the Niagara River, increasing its erosive capacity.

In certain districts, the subglacial till was not spread out in a smooth plain, but accumulated in elliptical mounds, 100200 feet. high and 0.5 to 1 mile (0.80 to 1.61 kilometres) long with axes parallel to the direction of the ice motion as indicated by striae on the underlying rock floor. These hills are known by the Irish name, drumlins, used for similar hills in north-western Ireland. The most remarkable groups of drumlins occur in western New York, where their number is estimated at over 6,000, and in southern Wisconsin, where it is placed at 5,000. They completely dominate the topography of their districts.

A curious deposit of an impalpably fine and unstratified silt, known by the German name bess (or loess), lies on the older drift sheets near the larger river courses of the upper Mississippi basin. It attains a thickness of 20ft (6.1m) or more near the rivers and gradually fades away at a distance of ten or more miles (16 or more km) on either side. It contains land shells, and hence cannot be attributed to marine or lacustrine submergence. The best explanation is that, during certain phases of the glacial period, it was carried as dust by the winds from the flood plains of aggrading rivers, and slowly deposited on the neighboring grass-covered plains. The glacial and eolian origin of this sediment is evidenced by the angularity of its grains (a bank of it will stand without slumping for years), whereas, if it had been transported significantly by water, the grains would have been rounded and polished. Loess is parent material for an extremely fertile, but droughty soil.

Southwestern Wisconsin and parts of the adjacent states of Illinois, Iowa, and Minnesota are known as the driftless zone, because, although bordered by drift sheets and moraines, it is free from glacial deposits. It must therefore have been a sort of oasis, when the ice sheets from the north advanced past it on the east and west, and joined around its southern border. The reason for this exemption from glaciation is the converse of that for the southward convexity of the morainic loops. For while they mark the paths of greatest glacial advance along lowland troughs (lake basins), the driftless zone is a district protected from ice invasion by reason of the obstruction which the highlands of northern Wisconsin and Michigan (part of the Superior upland) offered to glacial advance.

The course of the upper Mississippi River is largely consequent upon glacial deposits. Its sources are in the morainic lakes in northern Minnesota. The drift deposits thereabouts are so heavy that the present divides between the drainage basins of Hudson Bay, Lake Superior, and the Gulf of Mexico evidently stand in no very definite relation to the preglacial divides. The course of the Mississippi through Minnesota is largely guided by the form of the drift cover. Several rapids and the Saint Anthony Falls (determining the site of Minneapolis) are signs of immaturity, resulting from superposition through the drift on the under rock. Farther south, as far as the entrance of the Ohio River, the Mississippi follows a rock-walled valley 300 to 400ft (91 to 122m) deep, with a flood-plain 2 to 4mi (3.2 to 6.4km) wide. This valley seems to represent the path of an enlarged early-glacial Mississippi, when much precipitation that is today discharged to Hudson Bay and the Gulf of St Lawrence was delivered to the Gulf of Mexico, for the curves of the present river are of distinctly smaller radii than the curves of the valley. Lake Pepin (30mi[48km] below St. Paul), a picturesque expansion of the river across its flood-plain, is due to the aggradation of the valley floor where the Chippewa River, coming from the northeast, brought an overload of fluvio-glacial drift. Hence, even the father of waters, like so many other rivers in the Northern states, owes many of its features more or less directly to glacial action.

The fertility of the prairies is a natural consequence of their origin. During the mechanical transportation of the till, no vegetation was present to remove the minerals essential to plant growth, as is the case in the soils of normally weathered and dissected peneplains. The soil is similar to the Appalachian piedmont which though not exhausted by the primeval forest cover, are by no means so rich as the till sheets of the prairies. Moreover, whatever the rocky understructure, the till soil has been averaged by a thorough mechanical mixture of rock grindings. Hence, the prairies are continuously fertile for scores of miles together. The true prairies were once covered with a rich growth of natural grass and annual flowering plants, but today, they are covered with farms.

Read more here:
Prairie - Wikipedia

This online basement remodeling cost calculator is here to give you a basic estimate for finishing your basement. Finishing your basement includes many different variables, so its a good idea to get a good idea of the cost as early as possible. Circumstances, materials, and the like can change over time, but a good ballpark estimate will give you a basic idea of where youre starting from. We provide you with this calculator so you can get a better understanding of roughly what finishing your basement will cost.

This cost to finish a basement calculator is an excellent resource to help you determine cost based on square footage. With our online calculator, simply enter the square footage and youll receive an estimate of what finishing that space would cost.

Of course, every project is different and individual costs will vary depending on design choice, number of rooms involved, material quality, the difference between doing it yourself and hiring professionals, and other factors.

Basic Assumptions

Before using this basement remodeling calculator, understand that its pricing is based on a few basic assumptions about your floor. The calculator is assuming that youre starting with a concrete floor in an unfinished basement. Anything beyond that, including removal of old flooring materials, is not taken into account in this estimate. You should keep this in mind.

How to Save Money

Finishing your basement can be very costly if youre not careful, so you should do what you can to mitigate the cost. Save yourself some money while still getting the job done. With that in mind, here are some tips to help you save money when finishing your basement.

Successfully Finish Your Basement

Basements are a key part of many homes, but too many homeowners overlook their basements potential. While a basement can be used as a larger storage room, they are capable of so much more. While unfinished basements can function well as storage rooms, you can take steps to waterproof and finish your basement to transform it into a fully functional extra room in your home. If you want to finish your basement, here are some tips to help you along the way.

Dry Out Your Basement

The first step in finishing your basement it keeping it dry. Basements often deal with a lot of moisture vapor and hydrostatic pressure, which allow water into an unprotected basement. Because of this, any finished basement has to be waterproofed first. First, test your basement for moisture vapor so you know how much moisture youre dealing with. There are homes tests you can do yourself or you can hire a professional to do the test for you.

After youve determined how much moisture is affecting your basement, the next step is to dry out your basement walls and floors with a concrete torch. Drying your concrete ensures that SANI-TRED products will fully adhere to your basement walls and floor to completely waterproof your new space.

Waterproofing your basement with SANI-TRED (http://sanitred.com/basement-waterproofing/how-to-waterproof-your-basement-with-sanitred/)

Choosing a Floor

Once youve completely waterproofed and your basement is protected, you can move on to the rooms interior. Choosing the right flooring is an important part of making your finished basement truly your own. The type of flooring material you choose will definitely factor into your final price, so choose wisely and pick the floor thats best for your finished basement.

Finishing Basement Walls

Another important part of finishing your basement is choosing the right walls. Basements have concrete walls and floors, but once theyre waterproofed, you can design the entire space with new walls and floors to completely transform the space. As with flooring, choosing the right basement walls can also affect the final price of your basement transformation. False walls are common and can be customized to meet your needs while keeping the original concrete walls is an option for others. Keeping your concrete walls is a cheaper option, but false walls provide more customization. In the end, it all comes down to what youre looking for.

Upgrading the Ceilings

In addition to floors and walls, upgrading your basement ceiling is another option to consider. Finishing your basement creates a new room in your home and a part of any room is the ceiling. While its cheaper to leave the ceiling the way it is, many basements have exposed wiring and duct work that service the home above. In certain cases, leaving all this exposed may be the better option, but for others, upgrading the ceiling could be the right choice. Understand that any addition to the room will up the overall price, so be sure to make the right choice for the space and your wallet.

Tying it All Together

Now that your basement waterproofed, fully constructed, and finished, now you have to bring the space together. Make your finished basement a place you want to spend time in; add furniture, entertainment, and personal touches to transform your basement into a brand new room.

If youre looking to finish your basement and are wondering about how much itll cost, use the above calculator to get a basic estimate. Using this estimate, you can get a better idea of how much finishing your basement will cost. Of course, this is not a final cost, but it will give you a good starting point to work from.

About Will FowlerWill Fowler is the Marketing Director for the Concrete Protector and Sani-Tred in Wapakoneta, Ohio. Will designed his first website when he was 15, and loves all things in design, wordpress, and apple. Will enjoys writing about home improvement, basement waterproofing, and decorative concrete coatings. Will lives with his beautiful wife, four rambunctious children in Ohio.

Visit link:
Basement Remodeling Cost Calculator | SANI-TRED

This option refers to a project that involves taking a basement space that is already finished and altering the layout of the space and completing the refinishing work. This type of remodeling project typically costs between $20,000 and $30,000 for basic labor and materials costs, not counting any extras. In may involve creating spaces such as play rooms, recreation rooms, additional bedrooms, or home offices.

If you are willing to do the demolition of existing walls before calling in contractors to do finishing work, you can save as much as $2,000 on the overall cost.

Remodeling work on a basement usually involves some upgrades to wiring and HVAC systems as part of the basic cost package. Adding new plumbingsuch as when a new bathroom or wet bar is being installed, will add to the basic cost, however (see Ala Carte Pricing, below)

Guest suite: This special version of a basement remodel involves adding or remodeling bathroom and installing a kitchenette with cabinetry and necessary electrical upgrades. Expect to pay anywhere from $20,000 to $60,000 for this level of remodeling project.

Read more from the original source:
Average Basement Finishing Cost - The Spruce

To give you an exact price for your basement installation, well need to take measurements at your home. Our in-home estimate process is free and we wont pressure you to move forward with the project so give us a call today to schedule your appointment.

We would like to thank you for making our basement remodeling project an enjoyable experience. This seems like a strange thing to say since no one really enjoys having their house take over by workers for a couple of weeks. However, after having gone through this project with Comfort, it really was much easier than we ever expected. From the beginning, Steve was excellent to work with, very knowledgeable, putting us at ease throughout the project. Brandon and his crew of workers were very professional, always accommodating and willing to come up with solutions on the spot for everything."

"No project ever goes perfectly as planned, but we really appreciated how quickly and thoroughly our concerns were dealt with. Every last question was answered, every problem dealt with. You folks make it clear that you wouldn't be happy until we were happy. And yes, we're very happy with our basement.

Ed & Mary Alice, Latham

How do you want to use your newly remodeled basement space? Here are our top five basement ideas.

Follow this link:
Basement Finishing & Remodeling Experts - Comfort Windows

Need more living space but dont want the hassle of moving? Basement remodeling adds much needed square footage to your home, while transforming your damp, dark basement into a functional, enjoyable living space.

Allen Keiths team of qualified contractors handle all aspects of your basement remodeling project, from project planning to construction to final details. We work with you to create a living space to suit your familys particular needs, whether its a home theater, guest bedroom, home gym, or home office.

Not only will basement remodeling give you additional space, it adds to your homes overall value. If, down the road you decide to sell your home, a finished basement free of moisture will be a great selling point and advantage over similar homes.

Our complete basement remodeling services include:

Need ideas for how to transform your basement into a functional area of your home? Read our article titled "Top 5 Ways to Transform Your Space with Basement Remodeling".

If you want a team of qualified, experienced basement remodeling contractors for your Ohio basement remodeling project, contact Allen Keith Construction today. Wed love for you to take a look at our portfolio and discuss your project.

We offer basement remodeling services in the following counties:

More:
Basement Remodeling- Akron & Canton | Allen Keith Construction

Basement remodeling can help you add valuable space to your house. There are several factors involved in remodeling but it has to do mostly with the use of space.

Utilizing existing space in your basement to its fullest is very crucial so there are some considerations you need to make. Successful remodeling starts with a concrete plan for which you should consult with a specialist like us as we help you make the most of your basement at a very competitve price.

You need to keep in mind that basements are highly susceptible to water and humidity problems although the right kind of renovation design can help tackle these concerns. Another major basement nuasance is the constant molding but that can also be treated with microbial agents or mold inhibitor paints which can prevent the re-occurrence of such molds. As basement renovation experts we help you incorporate a basement renovation system in the overall basement design to ensure that problems of humidity and water leakages are avoided.

For best results a concrete plan for basement reconstruction must be well defined before commencing the project and not during mid-construction period. This concrete design plan should provide specific details about the fixtures, costs of project and project completion time.

In most cases basement remodeling techniques should be able to provide the following in its re design;

Getting a basement remodeling expertlike us with an unmatched experience is the best possible way of enjoying the best remodeling designs at reasonable costs.

Call us to set up your no obligation free consultation & estimate at 414-803-1760 today!

Read the rest here:
Top Basement Remodeling Company in Milwaukee

100 practical home remodeling ideas that can be completed on a budget. These home remodeling projects are a mix of inexpensive ideas and do-it-yourself projects, perfect for the average homeowner.- Advertisement -

Sick of remodeling ideas that are only possible for the rich?

The 101 home remodeling ideas in this list will help you make your home more comfortable, valuable, and functional. Most important of all, they are affordable, and almost all of them can be done without hiring an expensive contractor.

Zoom Property

While not all these projects may be appropriate for your home, you should be able to find at least 5 to 10 to do over the next couple of months in your free time.

Even if theyre small projects, they will quickly add up and help you transform your home.

And yes, this is a long article. Do as I did while creating it, grab a hot cup of coffee (see which single serve coffee makers I like), kick back and enjoy this list.

What kid (or man) doesnt want a race car bed? Many bedroom remodeling ideas seem like cool projects until you realize that youve spent a ton of money on an impractical set-up that youll hate in a few years. The ideas weve chosen are relatively affordable and practical projects that youll enjoy for years to come.

(Image source)

This brilliant makeover can be done in a weekend and can brighten up any bedroom with those old ugly bi-fold doors.

Starting with some cheap hollow core doors, add on some measured wooden panels to create your base. A coat or two of paint and some sharp (but inexpensive) hinges are all that is needed to finish off this project.

The materials should cost approximately $100.

Tools needed:

Read the detailed steps: http://www.beneathmyheart.net/2013/09/closet-door-makeover-reveal-dremel-weekends/

(Image source)

Its a shame when beautiful decor is ruined by a hideous popcorn ceiling. One elegant solution is to install a beadboard ceiling.

The project appears deceptively simple. Youll need to get beadboard from any local hardware store (easy), but then you need to measure it out correctly and cut it so that it fits your ceiling. While this is fairly easy for the experience DIY-er, it can be tricky lining things up right.

Remember, measure twice, cut once.

Bead board is relatively cheap, but you still dont want to be ruining slabs by making the wrong cuts.

See the steps behind this project: http://www.thekimsixfix.com/2012/06/installing-beadboard-ceiling.html

(Image source)

Once you notice how much your room resembles a simple box, youll want to do something about it. One popular option is to add crown molding.

Crown molding refers to the trimming that can be added to connect the walls with the ceiling. If you pick the right one for your room, youll add a nice touch of class.

You can get crown molding either online or at a local hardware store. Depending on the style youre looking at, it should cost you around $100-300, and a few hours of your time on a few weekends.

The only tool youll need is a mitre box and saw (to cut those corners perfectly).

Heres a full tutorial on installing crown molding: http://www.diynetwork.com/how-to/how-to-install-crown-molding/index.html

(Image source)

Minimalist design is not only beautiful when done right, but also clears up a ton of room in smaller spaces. Pick up a cheap shelving unit from a local store (or find a used one on Craigslist) thats appropriate for your closet. Give it a coat of paint if needed.

You can add rods for hangers, hooks, and attractive baskets for storing random objects. These are all inexpensive additions that will make your closet more functional and more attractive.

Heres the behind-the-scenes of the closet above, that was done for under $100: http://www.takethesidestreet.com/2011/04/custom-closet-on-cheap.html?m=1

Heres one more amazingly detailed look at remodeling a larger closet to maximize functionality: http://www.confessionsofaserialdiyer.com/how-a-girl-built-her-closet/

Additionally, heres another 11 ways to hack your closet space.

The difference a sleek headboard can make on the appearance and comfort of your bed cannot be understated. If youre handy and have some spare time, you can put together a beautiful headboard for under $100.

Heres a fantastic resource with 40 other DIYheadboards: http://www.diyncrafts.com/7215/decor/40-dreamy-diy-headboards-can-make-bedtime

(Image source)

Drum shades are all the rage right now, but often come with a hefty price tag. If you dont mind heading to the craft and hardware store, you can pick up the supplies to make a beautiful shade that wont hurt your wallet.

Before you start, make sure that theres a part of your lighting fixture that you can hook it on to. This type of drum shade will not fit all fixtures.

Also, if you are concerned about flammability, use a fire-proof spray on your shade.

See the full steps at: http://www.apartmenttherapy.com/how-to-make-a-diy-drum-shade-169299

(Image source)

Extra storage is always important in a small kids room. With all their toys, you need somewhere to put them that isnt the ground.

The next time youre thinking of upgrading a bed in your home, consider building your own bed, complete with tons of conveniently sized compartments for storage.

While it will take a significant amount of time, it will be incredibly rewarding and can be done on a budget.

As a note, you will need some common power tools, including the following:

Read the full steps here: http://ana-white.com/2010/05/twin-storage-captains-bed

What inviting bed doesnt have throw pillows to top it off?

While they arent too expensive to buy, they can add up quickly. If youre interested in improving your sewing skills, you can create unique low-cost throw pillows that add some personality to your bedding.

Heres a link to the full tutorial if you want to make a bowtie pillow: http://www.u-createcrafts.com/bow-pillow-tutorial/

Dont limit yourself to just one option though, here are a bunch more, and here is another detailed guide on how to make them (sewing instructions included).

(Image source) Note: Bed does not come with dog

Make sure to plan ahead if you arent an experienced craftsman, as it will take a significant amount of time and patience to build. On the plus side, youll have a beautiful, functional bed and a huge sense of accomplishment when youre done.

The wood for the project shouldnt cost you more than a few hundred dollars, maximum.

Youll need a circular saw and a good drill for this project, along with other common small equipment like safety glasses and a measuring tape.

See the full plans and construction steps here: http://ana-white.com/2012/08/plans/daybed-storage-trundle-drawers

(Image source)

This genius shelf can store books and other objects in a bedroom. Instead of a boring shelf, you essentially get a piece of functional artwork.

You can buy it here on Amazon for about $170, which isnt exactly cheap, but not just for millionaires either.

Here is a great guide on how you could make your own and save a bit of money: http://www.thedesignconfidential.com/2012/11/free-diy-plans-and-step-step-video-tutorial-building-modern-tree-shaped-bookshelf

Note that if you dont already have construction tools, its probably cheaper to buy it pre-made.

Benches are not only useful, but they can really improve the look of your room. If you build your own, starting from a cheap (possibly used) bench, you can make a gorgeous bench for $40 or less.

(Image source)

Heres a great step-by-step guide of turning an unflattering bench into one that will compliment the rest of your room: http://prettydubs.blogspot.ca/2013/02/making-tufted-bench.html

Dont feel that you need to build your own, there are plenty of great options online and in stores that wont cost more than $200.

(Image source)

This is one of the coolest remodeling ideas there is. If you want to feel like James Bond once in a while, a secret room in your home is a must.

Unfortunately, most secret rooms are incredibly expensive to build, which puts them off-limits for normal people.

The solution: a Murphy door.

While a Murphy door isnt cheap, itll run you around $1500, it is by far the most affordable way to create a secret room. The bookshelf slips into your doorframe, perfect if you have a walk-in closet in your master bedroom.

You can order one online at: http://www.themurphydoor.com/

(Image source)

Before you start any of these projects, consider the color scheme of your room. Having a great color scheme can make even a boring room look great, while a poor color scheme can make an amazing room look out of sorts.

To pick the perfect color scheme:

Once you have your colors, you can start your projects.

When it comes to paint, do it well. Heres an excellent guide to help you paint like a professional. Dont limit yourself just to walls, you can paint dressers as well to make them look like new.

(Image source)

Blackout curtains are incredibly stylish, and go with almost any room. On top of looking great, they block out nearly all sunlight, which increases your quality of sleep. Additionally, when closed during the day, they can block out sunlight, keeping your air conditioning bills lower during the summer.

Best of all, theyre relatively cheap. You can get a great set of blackout curtains online for under $50.

Note: Blackout curtains come in all colors.

(Image source)

Not only is it fun to look at yourself, but the light that mirrors reflect can make your bedroom seem larger and more open than it really is.

The most effective way to do this is to place a large mirror (or a few medium sized ones) on a wall that faces the windows. The mirror doesnt have to face it perfectly, as long as a decent amount of sunlight will hit it.

(Image source)

Murphy beds are great space-savers in small rooms, especially for kids. Flipping them up on the wall during the day frees up a lot of space for activities.

The problem is that most murphy beds are expensive, which is usually a problem if you live in a small home. Luckily, with a little work over a weekend or two, you can make your own.

This is the cheapest tutorial out there, with a total cost of just $150: http://www.yourmodernfamily.com/diy-wall-bed/

(Image source)

Read this article:
100 Smart Home Remodeling Ideas on a Budget