RON DAVIS CUSTOM HOMES owners Ron and Shirley Davis enjoy what they do and it shows in every aspect of their small family owned business. As a Luxury Home Builder,their exciting One of a Kind Home Designs and reputation of Quality finish out defines their reputation. Transparency in the home building process, especially in the way they treat their customers, is paramount. Their Quality *Energy *Comfort Features, designed specifically for Ron Davis Custom Homes, defines how Ron Davis Custom Homes approaches business as the top Luxury Home Builder in Dallas, Frisco, Prosper, Southlake and the Park Cities.

Everything is done the right way, from the original soils core sample on each home site to their Engineered Foundation Designs to the personal designer for every home. Ron & Shirley have a few things that represent their companies core philosophy which is It is not about who is right, it is about what is right and just as important is making your home about YOU. It has brought Ron Davis Custom Homes great success as a Luxury Home Builder and what sets us apart as the Builder of Choice in Dallas, Texas. Our Goal is Your Satisfaction is how we conduct our day to day activities of overseeing the building process for our customers.

See the article here:
Ron Davis Custom Homes

You dont live a cookie cutter life so you shouldnt live in a cookie cutter house. You can buy an existing home and try to mold it to accommodate your needs, but that doesnt always work.

With a custom built house from JCM Custom Homes, you can build your house exactly as you want it. Get a large, eat-in kitchen or a cozy basement for entertaining friends; put the kids bedrooms upstairs to keep the noise under control or go with a one-level home to avoid climbing stairs every day. The possiblities are nearly endless.

We work with you to determine the best balance between the items you want, what you need, and the most cost effective way to accomplish these goals. Then, using experienced and knowledgable contractors that are fully licensed and certified, we complete your custom home or remodeling project within the already determined scope.

We are designing and building some of the most beautiful, affordable and energy efficient (green built) homes in Hickory, Lenoir, Morganton, and throughtout Western North Carolina. So whether youre looking for a custom home on Lake Norman, an energy efficient home in Lincolnton, or a beautiful mountain home in Blowing Rock, our custom homes will exceed your expectations.

Our foundation is solid, our designs are unique and this is what makes us one of the best custom home builders in North Carolina.

If you are happy with your home for the most part but wish you had a better kitchen or an extra bathroom, JCM Custom Homes can also remodel any room in your house to better suit your needs.

As a home remodeling contractor, we offer unique and beautiful rooms that fit your style and your life. Kitchen remodeling, bathroom remodeling, home additions, and home improvements can turn your current house into your dream home. Part of our job is to keep up with the latest trends in remodeling and home improvements, allowing us to bring unique remodeling ideas and experience to you. We service a large portion of Western NC, covering Hickory, Newton, Granite Falls, Lenoir, Lincolnton, Morganton and more.

We pride ourselves on providing high quality, one of a kind, custom built homes and exceptional home remodeling. As a Western North Carolina custom home builder, we offer competitive prices and service you cant beat. Please browse through our website for additional information on our services and view our current projects as well. We look forward to working with you and building your dream home.

Read the original here:
Custom Home Builders NC - Home Remodeling | JCM Custom Homes

Jonathon Casada is a Houston Custom Home Builder with a GMB (Graduate Master Builder), who has 39 years of experience in the design build Houston custom homes business. He comes from three generations of custom home building. With our unique and luxurious custom homes in Houston, including homes in Tanglewood, Memorial Villages, and Spring Valley, there is no one more experienced with whom to trust the completion of your custom home project. Casada Custom Homes is the top Houston custom home building team, and we look forward to helping your dream house become a reality.

Houston home builder Jonathon Casada manages all aspects of your project, from start to finish. From choosing the ideal plot of land to build and develop, budget management and estimating to designing and customizing your living space, Mr. Casada is able to utilize a stellar custom home team of in-house architects and designers to complete your ideal vision. The planning, consulting, and estimates are free of charge, in order to make your dream home project a little easier. With advice every step of the way, count on Casada Custom Homes to make your Houston custom home design a reality. Call 281-808-7683 today to set an appointment with the master builder.

Read the original post:
Custom Home Builder of Houston | Jonathon Custom Homes

Landscape Design and Architecture Creating Beautiful Outdoor Living Spaces

When you look at your backyard, what do you see? Grass and a few trees, maybe some flowers if you were proactive in your gardening this spring. Now for the tough question - What do you want to see? A uniquely shaped in-ground pool, complimented by a stone patio, steps, a grill station and bar? Whether this is your landscaping dream, or something else entirely, Durham Hill will make it a reality.

Our award winning landscape architect, Thomas Earl, and his team of landscaping professionals have over 30 years of experience designing and constructing beautiful outdoor areas. From small projects like a patio or gazebo, to full outdoor living areas with a kitchen or waterfall, Durham Hill will create a design that is beautiful, maintainable, and perfect for relaxing and entertaining guests.

Homeowners and businesses alike frequently choose Durham Hill for their hardscaping needs. Our residentialhardscape services include designing and constructing stone and brick patios, walls, decks, walkways, steps, stone water features, pergolas, and much more. Whether your hardscape features are part of an outdoor room design, or you simply need a retaining wall installed to manage water problems, well ensure the job is done right from start to finish.

Our hardscaping services are perfect for commercial properties too! If youre looking to expand your restaurant with an outdoor sitting area, call on Durham. We can design and install a stone or brick patio meeting your exact space and budget demands. We can also incorporate water features like awaterfall or fountain for the addition of natural sound and movement.

Have a parking lot or driveway with frequently standing water? We can solve that problem too! Our permeable paver services will add a creative touch to your commercial property while eliminating water retention issues.

While Durham Hill specializes in designing outdoor living areas and hardscapes, were passionate about everything landscape including small landscaping projects and maintenance contracts. Not looking for an extravagant outdoor room, just something simple to relax in? Well build you agarden and reflection space instead! We use our planting expertise, cultivated while we operated as a nursery as well as landscaper, to build the most beautiful gardens. From color pallets to season of bloom, when you choose Durham Hill, youll enjoy a cascade of color and fragrance when lounging in your backyard spring, summer, and fall. You can also incorporate a small pond, patio, or stepping path for added visual appeal and leisure.

Is your lawndead? Are your bushes overgrown, or existing hardscape features falling apart? Durham Hill is here for those needs too. We provide the best in hardscape repair and replacement including cracked patios, bulging retaining walls, and uneven pavers. Well also come in andrevitalize your property if its been neglected for too long. And you can always count on Durham for general lawn care services, including spring and fall clean up, grass cutting, tree trimming and more.

Follow this link:
Durham Hill - Landscape Services for Homes and Business in ...

South Bridge Plaza | NEW Listing!

South Bridge Plaza is a well-positioned and impeccably maintained strip shopping center located 1/4 mile from US 41/Tamiami Trail, Sarasotas primary retail and commercial thoroughfare. The center has a daytime population of over 111,800 with 7,210 businesses within a 5-mile radius and its units offer bay depths of 70, ideal for a majority of inline Continue reading South Bridge Plaza | NEW Listing!

For Sale

Washington Shores is an attractive neighborhood shopping center with excellent visibility & easy access.. Anchored by Save-A-Lot and Family Dollar, the center is situated in a busy commercial corridor with access to I-4 via the John Young Parkway (SR 423) exit.Current availability ranges from 2,265 SF to 5,043 SF. Property BrochureDemographics

For Sale

Historic 57,871-sf former cigar factory building on a 1.74-acre lot that is home to Ellis Van Pelt Office Furniture and The Santaella Studios for the Arts. The main floor is spacious and open with high ceilings and beautiful exposed brick and original hardwood floors. The basement has direct exterior grade level access, windows and groundwater Continue reading Santaella Studio for the Arts Bldg

For Sale

Anchored by a brand new Luckys Market and offering an adjacent co-anchor opportunity, this retail development is situated on a 5.26-acre site with prominent building and pylon signage opportunities available. The property is within close proximity to Publix, West Marine, Office Depot, The Home Depot, Lowes, Sams Club, Costco, Target and Ross, among many other Continue reading Former Albertsons Redevelopment | Gulf to Bay & Belcher Rd | Clearwater, FL

For Sale

Anchored by Publix Supermarket, Bealls Outlet and Ace Hardware, Conway Plaza is situated in a busy commercial corridor approximately 3 milessoutheast of Downtown Orlando and less than a mile south of theinterchange for SR 408/East-West Expressway. The center offers excellent visibility to a combined traffic count of 66,5000 vehicles perday with immediate access from a Continue reading Conway Plaza

For Sale

9900 4th Street North is newly constructed retail space serving the northern end of the4th Street N market. Current availability includes three inline spaces totaling 5,320 sf and there is co-tenancy with Tire Choice and Glory Days. The property is strategically located to capture the daytime employment base within the North 4th Street Corridor and Continue reading 9900 4th St N

For Sale

The Shoppes of Eaglebrooke is a well positioned neighborhood retail center located in a highly residential and affluent area of Polk County. The Club at Eaglebrooke is situated 0.5 miles to the east and Lakeland Girls Academy is 0.3 miles to the north on Carter Road. Average household income within a 1-mile radius is strong Continue reading Shoppes of Eaglebrooke

For Sale

Polk City Center is a charming retail strip center situated in a quiet residential area only 9 miles from the main campus of Florida Polytechnic University. Tenants include Artistic Dental and Abiding Hope Ministries, andDG Market is directly across the street. There are two 1,040-sf inline spaces currently available. Property Flyer Demographic Report

For Sale

66th St Plaza is a well positioned neighborhood shopping center situated in St Petersburg and anchored by Save-a-Lot and Harbor Freight. Retailers in the immediate vicinity include Family Dollar, Kmart, Publix, Dunkin Donuts and AutoZone. There is a captive population of nearly 110,000 within a 3-mile radius and available spaces range from a 1,400-SF inline Continue reading 66th St Plaza

For Sale

Huntington Hills Plaza is a charming neighborhood shopping center with excellent visibility and easy access. Advantageously positioned near a well traveled, signalizedintersection across from Huntington Hills Golf & Country Club, the center offers current availabilities from 800 SF to 2,000 SF. Pylon signage opportunities are available. Property Flyer Demographic Report

For Lease

Space for LeaseStorefront for RentStore for RentRestaurant Space for LeaseCommercial Property for RentRetail Space for LeaseCommercial Property for LeaseRetail Space for RentCommercial Space for RentRetail Space for Lease Tampa FlRetail Space for Lease Orlando FlRetail Space for Lease St Petersburg FlRetail Space for Lease Miami FlRetail Space for Lease Ocala FlRetail Space for Lease Ft Lauderdale FlRetail Space for Lease Jacksonville FlRetail Space for Lease West Palm Beach FlRetail Space for Lease Lakeland FlRetail Space for Lease Ft Myers FlRetail Space for Lease Naples FlRetail Space for Lease Bradenton FlRetail Space for Lease Brandon Fl

Retail Space for Lease Brooksville Fl

Visit link:
Shopping Centers - Retail Space For Lease | Retail ...

2 Journal Square retail revamp, Jersey City. Rendering courtesy RKF.

It was once said that Jersey Citys revitalization efforts were a tale of two cities the Waterfront and Downtown areas were booming while other neighborhoods struggled. In 2018, Journal Square could perhaps be described the same way; while the second Journal Squared tower is under construction and development approvals in the area are notable, many new projects have yet to break ground, and the One Journal Square property continues to be a large, vexing gap.

Onthe positive side, a prominent building is getting a revamp that includes a major effort to activate the streetscape. 2 Journal Square, a 325,000-square-foot office building that was built in 1987, will soon be repositioned into Class A office space sporting prime retail and restaurant opportunities on the ground floor.

An existing Chase Bank branch on the street level will be staying put, but currently vacant first-floor office space will be converted into two separate retail storefronts. The first spot will run 7,600 square feet and potentially feature outdoor seating areas in addition to creating a buffer area between the building and John F. Kennedy Boulevard, a wider road that is sometimes criticized for its lack of pedestrian friendliness.

The second space will run 7,300 square feet, making both storefronts sizable for any potential tenant. The future retail at 2 Journal Square, just steps from the PATH station, will have great signage visibility and the building has existing below-deck paid parking. Food use is welcome, as the property looks to take advantage of a recent migration of restaurants to the nearby area that includes Flatbread Grill, Chipotle, Banana King, and others.

Retail real estate brokerage RKFs Rutherford-based office is handling the leasing for the future conversion, with brokers Robert Mackowski and Glenn Beyer handling the duties. 2 Journal Square represents an excellent opportunity for a savvy retailer to capitalize on evolving demographics, especially for lifestyle-driven brands including boutique fitness, gourmet cafs, and home goods, says Beyer.

Signage has just been put up at the property trumpeting the announcement. In a statement to Jersey Digs, RKF says renovations will commence in the fourth quarter of 2018, with the retail component expected to be available sometime in early 2019.

Go here to see the original:
2 Journal Square Getting Retail and Restaurant Space ...

Merry Christmas . . . uh . . . Happy New Year! . . . ahem . . . Ok, so its been a while since my last blog . . . Sorry for the hiatus. I was put on a support contract to help California Energy Commission staff write the updated (2013 code) version of the Residential Compliance Manual and that took me off line for a few months. I have a newfound respect for the hard working folks at the Energy Commission. They truly want the code to be fair, practical and enforceable. Thats a much harder task than any of us on the outside realize. All in all, there are many improvements to the code this time around. The compliance software is still a big mystery. The new dynamic forms will be very cool once the bugs get worked out.

The topic of todays blog post is summer outside design temperatures and why you shouldnt stress over them. More precisely, there are other things far more important to stress over.

A few years back, I literally had a contractor refuse to install my HVAC design solely because I chose a summer outdoor design temperature that was two degrees lower than what he thought it should be. I was using the temperature required by the energy codes and recommended by ACCA and ASHRAE. Granted, the project was a few miles away from the city that the temperature was measured for, and granted, it was on the other side of a small ridge. Even if the true summer outside design dry bulb for the precise location of the project was 2 degrees higher than what I used, how big of a difference does that really make? According to him, all the difference in the world.

His argument was that it would cause the A/C to be undersized and result in homeowner complaints that HE would have to deal with, not me. First of all, as a licensed mechanical engineer, I am totally responsible for the performance of any mechanical plan that I stamp and sign. Yes, he would be the first one they called, but if it turns out that my design was the cause of the problems, I would be responsible for fixing it and for paying for his time to respond to it.

The first thing to realize is that typical residential A/C systems only come in a few sizes. 1.5, 2, 2.5, 3, 3.5, 4 and 5 ton sizes. Roughly speaking these represent sensible cooling capacities of numbers something like 12,000, 16,000, 20,000, 24,000, 28,000, 32,000, and 40,000 btuh. Basically, what happens is that you do your load calcs and then you pick the next size up. So, if your sensible load is 13,000 Btuh, you would have to pick a two-ton because a 1.5 ton system would not be enough. (Note: these sensible capacity values are very crude. They are probably a little low. Im making them up because its easier to work with round numbers and I am too lazy to get some real numbers; however, real numbers would illustrate the exact same point. Actual sensible capacities come from detailed performance tables published by the manufacturer and depend on indoor temperature and humidity, outdoor temperature, airflow across the coil and, of course, make and model. Please dont use these as rules of thumb. I disavow any responsibility for them. If you want to learn how to determine these for real equipment, read ACCA Manual S.)

For a typical 3 to 4 ton load in a fairly new home, changing the summer outside design temperature from 98 to 100 adds about 1,000 to 2,000 btu to the sensible cooling load. The reason that it is a fairly small number is because the indoor and outdoor temperatures establish the temperature difference (delta-T) between the inside and outside of the house. This delta-T only affects loads caused by conduction through the building shell (heat transfer through solid walls, ceiling, etc.) and convection into the conditioned space (outside air leaking into the house). This delta-T has no impact on the largest single source of heat entering the house in the summer solar gains. Solar gains can be 30-40 percent of the sensible load and do not change due to outside temperature. Neither do internal loads.

Did you know that a house with an indoor summer design temp of 75 and an outdoor summer design temp of 100 will have about the same cooling load as a house with an indoor summer design temp of 65 and an outdoor summer design temp of 90. (65 is not a reasonable indoor summer design temp. Dont use that. Use 75. This was just another dumb example to make a point.)

So, lets say your sensible cooling load calc at 98 deg is 29,000. That would suggest a 4 ton system. If you re-ran it at 100 deg and it went up to 31,000, a four-ton system would still work. Your load calc at 98 deg would have to be over 30,000 before changing the temperature to 100 deg would even hint that you needed to go up to the next size equipment. In this case, that would be a five-ton system. So, lets just say for laughs that my load calc at 98 deg came out at 31,000. If I caved to the contractor and reran the calcs at 100 deg, they would come out at around 33,000. Too big for a 4 ton, so we would have to go to a 5-ton that delivers 40,000 btuh, sensible.

But, are we really doing the homeowner a service by putting in a system that is oversized by 7,000 btuh (21% excess capacity). Wouldnt it make more sense to really look at what this means and maybe try to find a way to make the 4-ton system work by dropping the load of the house back to 32,000? (The answer is YES. It would make tons more sense to do that. Pun intended.)

Also, what exactly does the summer outdoor design temperature number represent? Currently, we use a value called the 1% Summer Design Dry Bulb. It can be found for pretty much any city in California (there are about 750 listed) in the 2008 Joint Appendices, Appendix JA2.2. What does the 1% mean? Well, you can scan through Reference Appendix JA2 and by looking at cities you are familiar with, you will notice right away that it certainly doesnt represent the hottest day of the year. Its usually well below that. What it means is that the outdoor temperature is higher than that number only 1% of the time over however many years the data was collected for. (Also notice that they list a value for 0.1%, 0.5% and 2%. The code requires that you use the 1.0% value.)Another way of looking at this number is that 99% of the time, the actual cooling load is less than the load calculated using that temperature. The system is perfectly sized for the few hours where the temperature is exactly the design temperature. Lets be generous and say thats about 1% of the time. This means that 98% of the time the system is oversized and will cycle on and off (or not run at all).

So, if our cooling load and cooling capacity were exactly the same, lets say 32,000, then 1% of the time the load is greater than the capacity of the equipment and it cannot remove Btus as quickly as they are coming in. When this happens, the temperature in the house will creep up.

If you didnt know this already, a perfectly sized air conditioner will run continuously when the outdoor temperature is at or above the design temperature. This is a good thing and the reason why is a discussion for a later blog, perhaps. Just suffice it to say that cycling on and off is about as good for an air conditioners efficiency as stopping and starting is for your cars MPG.

Let me also say this: There is no such thing as a perfect load calculation. They are a SWAG, which is only little better than at WAG (A WAG is a wild-ass guess. A SWAG is a scientific wild-ass guess.) Trying to calculate an exact sensible cooling load is like trying to measure the average diameter of a cotton ball with a micrometer. Where do you draw the line? The best you can do is document your assumptions and hope that you are right most of the time (99% is pretty good, by the way).

So, what ultimately happens during that 1% of the time when the A/C cannot keep up? The indoor temperature shoots up like your car parked in the sun, your favorite leather chair burns skin off of your back, all the plants wilt, the goldfish are parboiled, and the kids crayons melt into pretty little puddles of color. No. None of these things happen. What actually happens is the indoor temperature will creep up a few degrees. If the set point is 75 degrees, it will rise up to 76, 77, maybe 78 degrees. (Seventy-eight degrees was the indoor design condition for many years by the way). How fast it takes to do that depends on the house. One of the biggest factors is how much insulation and thermal mass the house has. Thermal mass stores Btus in the winter and Bcus in the summer. A Bcu is a Bubbas Cooling Unit and it is equal to -1 Btu, see an earlier blog on that topic.

A fairly new, reasonably well-built house will rise about 1 degree per hour. Whether or not that becomes a big problem depends on how hot it gets outside and how long it stays above the design temperature.

The above graph shows a hypothetical house that has the equipment sized exactly to the load. Remember that this usually doesnt happen when you pick the next larger piece of equipment. Normally, there is some excess capacity in a properly sized system.

The red line is a typical pattern for outside temperature in the summer for a fairly hot city like Fresno or Sacramento. This graph shows two consecutive hot days where the outdoor temperature exceeds the design temperature by several degrees for a few hours. Remember, this only happens 1% of the time.

When it does happen, what happens to the indoor temperature?

The indoor temperature is represented by the blue/green/pink line. When the line is blue, the indoor temperature is below the thermostat set point, of 75 degrees, for example. This happens when it is cooler outside than inside. When the line is green, the indoor temperature is right at 75 degrees. This happens when the outdoor temperature is above 75 degrees but below the outdoor design temperature. When the line is pink, the indoor temperature is above 75 degrees. This happens when the outdoor temperature is above the outdoor design temperature. Notice that if these were weekdays, the pink bump is happening mostly when no one is home.

Something else to realize is that when the line is blue, the A/C is not running at all. When the line is green, the A/C is cycling on and off. When the line is pink, the A/C is running continuously. Interesting? I think so.

So, does that graph represent something that the typical homeowner would complain about? Possibly. Homeowners have a right to be picky. They are spending a lot of money on their home. Are there things a homeowner can do to make sure this doesnt happen (without changing the size of the A/C)? Absolutely. Remember, this only happens on the few hottest days of the summer and in a system with no excess capacity. Most homeowners know when hot days are going to happen and can take reasonable precautions.

Most cooling loads are calculated with the assumption that some or all of the interior shades (drapes, etc.) open. Keeping all of the drapes closed during hot weather makes a huge difference. Planting shade trees around a house makes a big difference. Even neighboring buildings provide shade not accounted for in the load calcs. Pre-cooling or overcooling the house can help too. This is when you set the A/C down a couple extra degrees, cooling the house down a little extra at night, and letting the thermal mass of the home help keep it cool during the hottest time of the day.

Did you know that a house with less thermal mass will have a taller hump in the pink part of the line. A house with more thermal mass will have a flatter hump.

The vast majority of homeowner complaints about cooling that I have dealt with did not stem from undersized equipment and certainly would not have been solved by using a higher outside design temperature. They stemmed from poorly built homes (leakier than expected, poorly installed insulation, etc.), underperforming cooling systems (poor refrigerant charge, low airflow due to undersized ducts, leaky ducts, etc.) and poor thermostat operation (turning system on and off and not letting it reach equilibrium).

This graph represents a more normal hot summer day. Where it does not quite reach the design temperature outside. These are far more common than the previous example. Notice that there is no pink bump where the indoor temperature drifts up. Realize though, that the lower the outdoor temperature is, the more often the system will cycle on and off. This reduces efficiency. The ultimate question then becomes, is it worth having a less efficient system the vast majority of the time just to prevent the indoor temperature from creeping up a few degrees on very hot days (which can be prevented with simple precautions). I vote no, but thats just me.

By the way, the same contractor that I mentioned at the beginning of this blog also told me that a 16 return duct is fine for a 4-ton system (hint: thats not even close). So, the moral of that story is: stop quibbling over things that we cannot control, like the weather, and start quibbling over things we can control, like quality construction, quality system design, good air flow, and proper thermostat operation.

Link:
Russell King, M.E. | Offering good advice, whether you ...

At Monks, we handle all types of bathroom renovations and remodels from simple makeovers to full renovations, to new bathroom additions. Monks offers a full-service, one-stop-shop for your bathroom remodel. Well provide you with a free quote and free design services. When you decide to move forward, your Designer will help you select and coordinate all of your materials in one of our showrooms. Then yourProject Manager will manage your project including permits, deliveries, installation, and inspections. Save time and hassle with Monks.

A bathroom remodel is a popular projectwith our northern New Jersey clients. Homeowners renovate their bathrooms for many reasons. A popular one is to improve itsutility, such as converting a shower-over-tub to a walk-in shower. Another reason is to accommodate an aging resident by adding a shower bench, grab bars, and hand-held shower head, for example. Oftentimes, a homeowner is looking to update the style of their bathroom. This is done when homeowners are looking to put their home on the market, as well as for their own enjoyment.

Bathrooms reflect the current design and lifestyle demands. Some trends we are seeing in bathroom remodels include:

See our bathroom gallery for recent bathroom remodel projects.

A bathroom makeover is a straightforward projectin which we replace the tile and fixtures in the room, but use the existing walls, floor, plumbing, and electrical. This process takes about 7 14 days for an average 40-70 square foot bathroom. This process is appropriate when there are no plumbing or electrical issues to fix, and you want to keep the existing layout. Townships do not require permits and inspections when only installing new vanities, toilets, or tile in your bathroom.

To learn more, see a Bathroom Makeover Video

A full bathroom remodel, as well asthe addition of an entirely new bathroom takes about a month and requires permits and inspections. During this type of project, we upgrade all the plumbing and electrical in the bathroom in addition to installing new water-resistant drywall, tile, and fixtures.

In the two bathroom remodel examples below, tubs were converted to large showers. For the second project, the walls and plumbing were moved in order to allow for the oversized two-person shower with dual shower heads.

According to a HomeAdvisor poll of local members, an average bathroom remodel in northern New Jersey costs a little more than $10,000. However, this cost can vary widely based upon a few factors.

To ballpark your project, first, decide if you will require anyplumbing or electrical work. Adding these specialists will increase the installation cost considerably.

The second main cost factor is your materials. Purchasing stock, builder-grade materials are much less expensive than custom vanities, marble tile, and high-end fixtures.

Of course, a DIY bathroom remodeling job is less expensive than hiring a professional. However, this is only true if you know what you are doing.

We will come to your home and discuss your project. We'll take measurements and provide you with an all-inclusive, itemized costfor the installation. Then you will come into our Kitchen & Bath Design Studio in Morristown or Fanwood and meet with one of our Designers.

A Designerwill help you select and coordinate all of your materials including vanities, countertops, tile, flooring, fixtures, and hardware. Your design consultation will be at a scheduled time that is convenient for you. During your appointment, a Designerwill provide undivided attention. Also, our design services are always complimentary, and you are under no obligation.

Our Production Managers willschedule your bathroom project efficiently, prevent delays between the different trades, and ensurehigh-quality work.

Ready to get started with your bathroom remodel? Call 973-635-7900 to schedule your free in-home estimate.

Read more:
Bathroom Remodeling Experts in New Jersey - Free Estimate

Featured Project

Demolition of NASA CX 17A and B Launch Towers, Cape Canaveral, FL

On July 12, 2018, D. H. Griffin Wrecking Company, Inc. successfully dropped two 61 year old missile launch towers - CX 17A and 17B Towers at the NASA Space Launch Complex on Patrick AFB, Cape Canaveral, FL. The 170 foot towers were responsible for over 325 rocket launches between 1958 and 2011. Once complete, the scope of this Heritage Launch Deactivation Delta II Complex 17 project will include demolition and removal of the towers, associated foundations and ancillary support structures.

Thank you for the opportunity to introduce you to the D.H. Griffin family of companies (DHG). We are a vertically integrated group of companies that provides contract demolition, environmental and other construction services, to both public and private business sectors. DHG completes in excess of $400 million dollars in project revenue each year.

Our company has grown over the years to a network of over 1,000 employees with offices in eight states. DHG continues to grow through dedicated employees and loyal clients that we frequently do repeat business with. Combining our experienced employee base with our financial strength, bonding capacity and equipment resources, DHG can provide efficient and cost effective turnkey services.

If we have already done work for you, we would like to thank you. We welcome our future clients and invite you to see what the D.H. Griffin Companies can do for you.

David H. Griffin, Sr.CEO and Founder of D.H. Griffin Companies

D. H. Griffin Wrecking Company, Inc. is pleased to announce that it has been contracted by Improve Georgia LLC (ImproveUSA.com) to provide demolition services to make way for their expansion into the Atlanta area. DHG will demolish and remove the former Georgia Pacific facility located at 6945 Button Gwinnett Drive (4600 NE Expressway) in Doraville, Georgia. Demolition of the 220,000 square foot industrial packaging facility will begin immediately and be complete in Spring 2019.

Read this article:
D. H. Griffin Companies - Demolition, Environmental ...

Best Land ClearingCompany in Florida

Florida land clearing company specializing in excavation services, site prep, bulldozing, retention ponds, site surveys, and demolition. With a combined 20 years experience in land clearing and related services, we are the best company to your project done right. Contact us today at 352-547-5603 for a free estimate.

Our company is run by disabled veteran and we only hire veterans to work for us. We're committed to serving the veterans of central Florida by offering quality work they can be proud of. We take pride in our work and the team of people who work with us every day.

We are a company of choice for residents, general contractors, businesses, land developers, and property owners located in central Florida. Land clearing and site preparation services are available to get properties ready for new construction, fresh landscaping, or even for sale. Our site demolition team will fully analyze the site to ensure a completely safe, fast, and environmentally friendly demolition.

Let us help you plan your project! Many projects - for residential or business purposes - need more than one type of service. We will help you decide how to best clear, prep, or beautify the land around the property. Examples of projects we have done in the past include:

We serve all counties and areas in central Florida. If your location is not listed below, please contact us. We may still be able to work with you on your project.

We offer Land clearing services for agricultural, commercial and residential property in Florida.

We provide turnkey excavation services in Central Florida and all of the surrounding areas.

We can remove all brush, trees, and stumps within a particular plot of land to make room for new construction sites.

Call Toms Excavating Services, Inc for our professional Bull Dozer Services for all of Florida.

In some instances, stump grinding is not sufficient to remove a problem trees root system, so we use heavy equipment.

In some instances, stump grinding is not sufficient to remove a problem trees root system, so we use heavy equipment.

Whether your project is large or small, we will handle it with precision and care. Every project we take on is managed with professionalism and care.

If you need a Florida land clearing company for your excavation, hauling, removal, survey, or demolition needs, give us a call. We provide completely free estimates that take your specific home or business property's needs into consideration. Contact us today at 352-547-5603 for a quote.

Here is the original post:
Land Clearing Company in Florida - Excavating and Bulldozers ...