Home Builder Developer - Interior Renovation and Design

(800) 277-1960

RefaceBoston@gmail.com

Testimonials:

"We couldn't believe it when you told us that you felt that one of the new cabinet doors was too large (after installation) and recommended that we do it as 2 smaller doors. We agreed and you ordered the new doors & came back to install them all at no additional cost."

-Demitri K.Plainville, Massachusetts

Testimonials:

"We just wanted to thank you for the awesome job on our cabinet refacing. They Look AWESOME! We get so many compliments Everyone thinks they are new, not refaced!"

-Lori U.Berwick, Maine

"Shawn gave up his July 4th holiday and he worked the whole day just to make our life a little better and more comfortable. We just cannot say enough about the professional workmanship and manner of the guys at Affordable Cabinet Refacing"

-Sandy P.Epping, New Hampshire

(800) 277-1960

RefaceBoston@gmail.com

Testimonials:

"The schedule you gave us initially was kept & everyone showed up on time & were not only professional, but so friendly we felt they could have been part of the family. We had no worries about leaving any of you at our house alone. Joan even locked up when they were done!"

-Martin P.Andover, Massachusetts

"You should be very proud of the business you have built! You come with our highest recommendations. We could not be happier with the final outcome."

-Mary C.Portland, Maine

(800) 277-1960

RefaceBoston@gmail.com

Testimonials:

"We were very happy with how quick the turnaround was (only 3 days) and how unnaffected our lifestyle was by the whole process."

-ColleenSaugus, Massachusetts

"Once Shawn gave us a price, no matter what they came across, the price stayed the same."

-SheriBillerica, Massachusetts

(800) 277-1960

RefaceBoston@gmail.com

Testimonials:

"My husband is very particular, so the fact that he was happy with everything that you guys did really means something!"

-Michelle A.Warwick, Rhode Island

"he quality of workmanship and materials. I would recommend Affordable Cabinet Refacing to anyone looking for an updated kitchen at an affordable price."

-Jean H.Wayland, Massachusetts

(800) 277-1960

RefaceBoston@gmail.com

Testimonials:

"Shawn explained everything to me and walked me through the entire process & gave me the best price. When some unforseen extra work needed to be done at the end, he stuck to his original quote and did not charge me extra!"

-Chris S.Bridgewater, Massachusetts

(800) 277-1960

RefaceBoston@gmail.com

Read the original here:
Before & After Photos - Affordable Cabinet Refacing

New Look Kitchen Cabinet Refacing wants remodeling your kitchen to be a fun and pleasurable experience. Many of todays homeowners prefer refacing their existing cabinets. They dont have the time and often dont wish to make such a large investment in their kitchen.

So, before you begin, its a good idea to decide on the scope and magnitude of the update you want. Theres no sense in doing a complete makeover if you are happy with the basic layout of your existing kitchen.

New Look Kitchen Cabinet Refacing has been servicing Long Island, Queens, Manhattan, and Brooklyn for the past 15 years with exceptional service and quality craftsmanship.

Our experience and attention to detail with help you through the many design choices, and accessories that will give you the kitchen of your dreams. Get quality kitchen cabinet refacing, and kitchen remodeling for your home at a fraction of the price with New Look Kitchen Refacing.

Read the original here:
Kitchen Cabinet Refacing - New Look Kitchen Refacing NY

How much does it cost to remove a tree?

While trees are nice to look at, and they certainly enhance most landscapes, there are times when its necessary to consider having them removed. Whether they fall and damage your property, they are standing dead, the tree is leaning in the wrong direction or some other hazard, its important to consider getting the tree removed before it can cause damage to your property or someone on it.

This guide takes a close look at the cost to remove standing trees from property and how much extras like stump removal and log splitting will add to the original price, being $700 the average cost to remove a standing medium tree (30-60 feet).

The height of the tree that needs to be removed has a major impact on the overall cost. For standing small trees (up to 30 feet)such as a Russian Olive or a Dogwood, the average removal cost is $100-$450. To cut down medium trees (from 30 to 60 feet) such as a Black Alder1 and a Crabapple the cost is between $200 and $1000 on average, with most services charging in the middle between $350 and $600 for standard sized trees that arent in difficult locations. For larger trees (60-100 feet)such as a Red Oak or a Pine, the average price is $400-$1400.

Professionals normally bring the tree down to a stump, haul away, or at least chip, the small branches and cut the trunk into small sections. All instruments and machinery needed for the removal are included in the price. Getting the pieces removed will cost an additional $50 to $100 for standard sized trees. Having just the limbs of the tree removed and the trunk left in place typically costs between $50 and $75.

Read more:
Cost to Remove a Tree - Estimates and Prices at Fixr

ISA Certified Arborists

Tree removal and trimming is extremely important. The condition of your trees can have a significant effect on the value and safety of your property. If you need to remove a dying tree from your property or are in need of any emergency or related services, we encourage you to speak with our tree removal professionals today. You can set up an appointment by calling (404) 713-4305 now!

We offer you the following tree services in Atlanta:

When you need to make the decision about whether or not to remove a tree or need other tree services, you can count on our team at AKA Tree Removal to guide you in the right direction. While there are many tree removal contractors and arborists in our area, we are confident that we are the right tree removal professionals to handle the service you are looking for.

Being a leader in the tree and arboriculture industry, AKA has the experience and knowledge to handle any project both small and large. Our company is proud to have served many customers in the local Atlanta, GA community and offers the best tree services available in your local neighborhood. Free estimates and consultation in Atlanta communities about your tree issues available!

We are up to date on the latest arboricultural and tree care standards and set ourselves apart in the following ways:

Our Atlanta tree removal professionals always work with your insurance and are proud to be a company that is characterized by integrity and genuine customer care. When you are plagued by a tree issue and arent sure about which course of action to take, we will happily evaluate the situation for you and help you make an informed decision that is best for your family, property, and trees in Atlanta, Georgia.

For more information about our tree services, contact our office today at (404) 713-4305!

Excerpt from:
Tree Pruning, Tree Removal Experts | Atlanta, GA | AKA ...

Owning a home, as opposed to renting one, has its advantages and disadvantages. If you own a property, you probably already know this. It's up to you to budget your money wisely enough to pay for a plumber if your pipes burst or a contractor when your roof leaks. However, do you ever set aside funds for tree removal? Paying to remove fallen trees and branches or cut down existing trees usually isn't at the forefront of homeowners' minds.

It's likely you won't need a tree service until severe weather, such as a tornado, hurricane or even snow storm, hits your area. With that said, don't rush yourself when adding tree removal services into your maintenance budget. Picking up the phone to call the first tree service you find can have dire consequences for your pocketbook. It's best to treat a tree removal company just like you would any other professional contractor who works on your home. Do your due diligence and you're bound to find an affordable and reputable business willing to assist you.

You will need to contact a tree removal service not only if you have a large fallen tree in your yard, but also if your trees require trimming or pruning. Many times, bigger trees, such as oaks and maples, need a few cuts here and there if their branches and leaves grow too close to your house, your neighbor's yard or if they obscure traffic signs.

Use Winter to Your AdvantageIf your trees need a trim, try to schedule an appointment with a tree service during the winter months. You can get cheaper, more affordable rates since there's less demand for tree removal from December through March.

However, it's not just the cost of trimming trees that's less expensive in winter. If you need an entire tree removed along with stump grinding, then consider holding off on the job until the colder months arrive. As long as it's not an emergency, like a fallen tree or a dying and diseased oneon your property, then it's safe enough to wait until the tree service's busy season is over with. This can give you enoughtime to investigate the average prices in your area, collect some quotes and research reputable companies before making your decision about whom to hire.

Since winter is typically the offseason for tree removal services, you also have a better chance at negotiating a price that will suit your budget. Plus, the whole tree removal process is a lot easier on your yard when done in the winter, since the ground is usually frozen. Cutting down a tree and grinding its stump could rip up softer soil during warmer months.

If you have plans to remodel your home and add on to the existing structure, or you just want to remove unsightly looking trees from your yard, having a tree service come out to cut down your trees during winter can save you some cash before your contractors get started on your addition.

Arborists can determine if there are fungi or pests such as woodpeckers or bugs infecting your trees.

Save Through MaintenanceKeep in mind that regularly maintaining the health of your lawn and trees can save you money in the long run. You can avoid expensive tree removal if you regularly prune your tree branches and keep an eye out for pests that can damage your trees and contribute to the plant contracting a disease.

If you think something could be wrong with your trees, it's a good idea to hire an arborist to examine the health of your trees and the soil in your yard. He or she can determine if there are fungi or pests such as woodpeckers or bugs infecting your trees. If you and the arborist catch any tree ailments early, you have a better chance of nursing your trees back to health. Spending a little money on pruning, which can run between $200 to $660 depending on the size of the tree, can spare you from having to spend upward of $1,000 to cut a dead tree down.

Trimming and pruning your tree's branches goes a long way toward keeping them healthy. However, if your goal is to keep your trees alive and save yourself from spending money on removing dying trees from your property, be wary of any tree service companies advertising tree "topping" work. That term refers to apruner negligently sawingoff branches and trimmingthe tree in such a way that the branches cannot grow back and the tree inevitably dies.

You will know you're not dealing with a professional tree service if it markets itself as performing tree topping. Stay away from these companies for the health of your trees.

Do-It-Yourself PruningWhile it's not advisable in many situations, if you have a smaller tree located away from power lines, you can perform some DIY pruning and trimming. Cutting down trees or trimming them might look simple enough, but it's dangerous work - especially if you're working in an urban or suburban environment around people, other houses and electrical lines.

If you do choose to prune a tree yourself, you need the right equipment before starting the job. Invest in a hard hat and goggles for protection and look for a handheld pruner or lopper at a home improvement store. A pair of loppers can cost anywhere from $30 for a manual version to $100 for a battery-powered set.

Properly trimming a tree can be a time-consuming and physically demanding chore, so be prepared for a workout.

You'll require special tools to reach taller branches.

In case you want to make pruning easier on yourself, consider renting a gas-powered pole pruner. You can reach taller branches more effectively and you don't have to strain your hands like you do with a manual lopper. Depending on the brand and model, this tool can cost anywhere between $130 to $600.

If you have larger and taller trees that need trimming, it's safer to hire a professional service.

When you can't do it yourself and you need a tree removed immediately from your property, it's time to enlist the help of a tree removal service. While the average cost of trimming, cutting down a tree or grinding and removing a stump is dependent on a host of factors, there are steps homeowners can take to ensure they get the best price.

However, be wary of any tree removal service that's a door-to-door operation or one that quotes you a very low price for the job compared to other companies.

Here are some best practices to keep in mind when looking for a tree service:

Taking precautions and knowing when you can do the job yourself will help keep your budget in line and your yard looking great.

Excerpt from:
How to Get Affordable Tree Service - YellowPages.com

Start Up Front

If youre wondering where to start a landscape transformation, look no farther than your front yard. Its the first thing that you see driving up to your house, and you can wow guests before they even enter your home. Just remember that curb appeal is important, but no matter how pretty your landscape is, it needs to be functional.

Do all of your hardscaping projects before you set out any plants. Hardscaping can include a porch, sidewalk, driveway, parking areas, decks, fencing, patios and arbor. These projects usually involve construction, which can compact your soil or damage turf and plantings, so its important to complete any heavy work before plantings begin.

Your foundation planting should embrace your house and not cover it. Low-growing shrubs or groundcover should be planted in front of low windows and porches. Larger rounded shrubs or small trees work well planted on the corners of your home. These larger plants will frame up your house and help soften the box-like structure. Remember to create a small bed in your front yard for annual color. Flowers will add instant charm.

Your backyard should be an outdoor living area to enjoy. If you need privacy, install wooden fencing or large shrubs around the perimeter to create walls. Decks and patios make great sitting or dining areas when the weathers appropriate and they create a nice overflow for guests during parties.

Grilling stations or outdoor kitchens can be used to cook your meals and not heat up the kitchen. Fire pits and outdoor fireplaces are very popular and allow you to enjoy your yard even when theres a little chill in the air. Both of these options make for easy entertaining or a fun family activity.

Consider your options and the space you will need. If you have a sunny backyard you might consider putting in a kitchen garden where you can grow a few herbs or vegetables. Just be sure the area you choose receives several hours of sun. Do you need a childrens play area? If so, position it where you can see it from your deck or patio to keep a watchful eye on the young ones.

Side yards are often narrow strips that are rarely seen. They can be a good place to house your utilitarian needs. Garbage cans, firewood, storage and garden sheds often work well tucked into your side yard. If you have dogs it might be a good place to install a dog run. Youll probably need a walkway on at least one side of your house so you can easily navigate from the front of the house to the backyard.

Know a tree or shrubs ultimate size before you put it in the ground. A small yard is not a good place for trees such as river birch, red maples, sugar maple, oaks or magnolia. Trees such as Japanese maples, crepe myrtles and redbud would be better suited for little landscapes. Avoid planting brittle trees such as river birch or silver maples next to your house or close to parking areas to avoid damage from falling limbs.

See more here:
The Essential Steps to Landscape Design | DIY

Overview

If you have some basic plumbing experience, you can replace a water heater yourself and save $200 to $400 in plumbers fees. Well show you how to replace a conventional natural gas water heater. The procedure is the same for a propane heater. If you choose a power vented gas model, all the water and gas connections are the same as we show, but the venting steps are different. For more, search for power-vented water heater above. Replacing an electric water heater is a little easier. All the water connections are the same and you dont have to deal with gas piping or venting. For details on situations different from the one we show here (such as electric models, plastic water lines or copper gas lines) search for replace water heater above.

If you have lots of plumbing experience, you might be able to complete this project in half a day. But we recommend you start in the morning so you have plenty of time to get the job done and not leave your family without hot water overnight. Youll need a helper to carry the old unit out and the new one in. Check with your trash hauler or recycling center to find out how to dispose of the old heater.

A new water heater will cost from $250 to $500, depending on the size, efficiency and warranty. The materials youll need for the installation depend on your situation and local codes.

Even if youve worked with plumbing and gas lines in the past, play it safe and contact your local department of inspections. Get a permit (if required), and go over your installation plans with an inspector.

Shut off the gas by turning the handle a quarter turn. In the off position, the handle is perpendicular to the pipe.

Disconnect the gas at the union fitting. Place the larger wrench on the nut and hold the unions collar with another wrench. Start with the wrenches a quarter turn apart.

Cut the cold water line above the old gate valve to make room for a new ball valve. Cut the hot water line at the same height.

To get started, turn off the gas at the valve near the water heater (Photo 1).

If the isolation valve above your water heater is a gate valve (Photo 3), we recommend that you replace it with a ball valve (Photo 4). Be sure to choose a fullport valve. Gate valves often leak or wont close tightly. To replace the valve, youll have to shut off the water at the main valve (usually near the meter). That means your whole house will be without water until you install the new valve. If you already have a ball valve or if you choose to leave the old gate valve in place, you can simply shut it off. That way the rest of the house will have cold water while you work (toilets will still work!).

With the water and gas off, drain the water heater. Attach a garden hose to the drain valve at the bottom of the tank, route it to a floor drain and open the drain valve. To allow air into the hot water lines and speed up the draining process, go to the highest faucet in the house and turn on the hot side only (on single-handle faucets, push the lever all the way to the left).

If your valve doesnt look like this one, see Old gas valves can leak.

Disconnect the gas line at the union (Photo 2). Then disassemble the threaded tee and drip leg and remove the nipple from the water heater gas control valve. Dont throw them awayyoull need them for the new water heater. If your gas line is copper or a flexible supply line, just unscrew the nut.

To disassemble the vent piping, remove the sheet metal screws. Wear gloves; the ends of the metal piping are sharp. You can reuse the vent pipes if theyre in good shape. But if you find even slight holes, cracks or corrosion, toss them into the trash. New pipe is inexpensive and leaks can allow deadly carbon monoxide to build up in your home.

Next, cut the copper water lines with a tubing cutter (Photo 3). If you have copper corrugated water lines, simply disconnect the nuts at the water heater. If you have galvanized steel pipes, disconnect unions just as we did with the gas union shown in Photo 2. Also unscrew the blow tube from the temperature and pressure (T&P) valve. You may be able to reuse it on the new water heater.

At this point, the old heater should have drained enough so it can be moved off to the side (with a helper). If the heater isnt draining fast enough, sediment may be clogging the valve. Allow it to drain as long as possible and then move the heater outside so you can remove the drain valve from the tank.

Reconnect the water. Install new valves first so you can turn on the water to the rest of the house. Then install nipples, followed by threaded fittings and stubs of pipe. Hold the final section in place to mark the length.

Make the final connections with slip couplers. Be sure the coupler doesnt slide down as you heat it.

Set the drain pan into place with the opening facing the floor drain. Get someone to help you lift and set the heater in the pan. If youre replacing the isolation valve, solder on the new ball valve next.

Screw dielectric nipples into the new water heater. These plastic-lined nipples reduce corrosion and increase water heater life. Some water heaters come with dielectric nipples already installed (buy a set if yours doesnt have them). Be sure to coat the threads with pipe thread sealant or wrap with Teflon tape. Next, solder female threaded copper pipe fittings to short lengths of copper tubing and set them aside to cool. Tighten the cooled fittings onto the nipples. Then add short sections of pipe below the valves (Photo 4) and make the final connections with slip couplers (Photo 5). You must use slip couplersstandard stopped couplers wont work. For tips on soldering copper pipe, search for solder above.

Thread a blow tube onto the T&P valve. If the old blow tube is too short, you can use 3/4-in. galvanized steel pipe or copper pipe (along with a male threaded fitting). If you use galvanized pipe, cut off the threads on the bottom to prevent someone from capping off the blow tube if the T&P valve leaks.

Connect the vent pipe to the hood with sheet metal screws. Never use a reducer, even if the hoods opening is smaller than the vent pipe.

Snap the new draft hood onto the water heater and secure it with sheet metal screws. Check the installation manual for the recommended diameter vent pipe for your new heater. If the recommended vent pipe diameter is larger than the vent hood opening, dont install a reducer. Measure a straight section of new galvanized vent pipe to rise as high as possible before you install the adjustable elbow (the higher the rise, the better the draft). On any horizontal sections of vent, make sure the pipe slopes down toward the water heater 1/4 in. per foot of pipe. Bend out small sections of the pipe and attach it directly to the vent hood with screws (Photo 6). Then continue installing new vent pipe sections and connect to the flue. Most plumbing codes require a minimum of three screws for each vent pipe joint. For tips on cutting metal venting, search sheet metal above.

Reconnect the gas. Hold back the control valve to avoid damaging it. Then screw the drip leg into the tee.

Measure between the union and the tee and add 1 in. to determine the correct nipple length.

Test for leaks by brushing soapy water onto every connection. If you see bubbles, tighten or reconnect the joint.

Apply gas-rated pipe thread sealant or tape (dont use standard white Teflon tape) to the gas nipple and thread it into the new gas control valve. Tighten the nipple using two pipe wrenches (Photo 7). Assemble the tee and drip leg using the same two-wrench technique.

If the old section of pipe below the union no longer fits, youll need to measure for a new nipple (Photo 8). Make sure you assemble and tighten the gas union before you measure the length for the intermediate nipple. Add 3/4 in. to 1 in. to this measurement and buy a new nipple. When the gas connections are complete, turn on the gas and check for leaks (Photo 9). You can buy leak detector in a convenient spray bottle ($3) or mix your own solution (one part dish detergent, two parts water).

Open the water valves and an upstairs faucet and fill the tank. Leave the faucet open until water flows out. Then shut it off and check the new water connections for leaks. Open the gas valve and light the pilot light following the manufacturers instructions. Youre in for a pleasant surprise with your new water heatermanufacturers have done away with the old match-lit pilot system. Instead of igniting the pilot with a match or lighter, you just push a button.

When the burner fires up, test for backdrafting, which can allow deadly carbon monoxide into your home. Close all doors and windows and turn on kitchen and bath exhaust fans. When the burner has been running for at least one minute, move an incense stick around the draft hood. The smoke should be drawn up into the vent. If not, the exhaust may be entering your home. Turn off the gas and call in a professional plumber.

Finally, set the thermostat to a safe temperature. (For help, search for water heater temperature above.) In about two hours, youll have enough hot water for a well-deserved long shower.

The grease-pack valves found in older homes tend to leak as they age. Even if your local code doesnt require replacement, we recommend you install a ball-type gas valve instead ($10). Replacement isnt difficult; you just unscrew the old valve and screw on the new one. But you will have to turn off the main gas valve and later relight pilot lights. If you dont know how to handle these tasks, call in a professional plumber and expect to pay $80 to $150.

Youll find lots of accessories for your new water heater at the home center. Some are required by local codes; others are just good ideas. Plumbing codes vary, so check with your local inspector.

1. Gas shutoff valveAll codes require a gas valve near the water heater. If you have a grease-pack valve, see Old Gas Valves Can Leak section above.

2. Earthquake strapsThese straps prevent a water heater from tipping over and are required in earthquake-prone areas. $12 per pair.

3. Flexible gas lineA flexible gas line can withstand movement and is usually required in earthquake-prone areas. Theyre easier to connect than steel pipe, but theyre not allowed everywhere, so check with your inspector. $15.

4. Drip legAny dust or grit in the gas line falls into this short section of pipe before it can reach the water heaters control valve. The required length of the drip leg varies.

5. Isolation valveAll codes require a valve on the cold water line. Though not required by codes, a second valve on the hot line makes future water heater replacement easier. $10 each.

6. Flexible water linesThese flexible lines withstand movement and are required in earthquake zones. But you may want to use them just because theyre easy to install. $20 per pair.

7. Overflow panMost plumbing codes require a pan and drain pipe in locations where a leak can cause damage. But installing a drain pan is a good idea for any location. $18.

8. Expansion tankSome codes require an expansion tank to absorb the pressure created when heated water expands. $35.

9. Blow tubeThe T&P valve releases pressure, and a blow tube directs the scalding hot water toward the floor. The required distance between the blow tube and floor is usually 18 in. or less.

New Jersey building codes require a bonding wire be installed between the cold/hot pipes and the gas line. The majority of local codes dont require the bonding wires but they do serve a purpose. According to the experts we spoke with, bonding wires may actually extend the life of the water heater by diverting electrolysis from the anode rod and tankeven on electric models. So whether or not your local code calls for the bonding wire, you may want to install one to get more life out of your water heater. This little project is brain-dead simple. It only costs about $10 and takes about 10 minutes.

Have the necessary tools for this DIY project lined up before you startyoull save time and frustration.

Avoid last-minute shopping trips by having all your materials ready ahead of time. Heres a list.

Visit link:
Water Heater Installation - familyhandyman.com

Good rain gutters are an integral part of a home's exterior. Old, damaged or defective rain gutters can cause a lot of damage. When a gutter clogs, the water is not diverted properly and overflows into either the house or foundation. This can cause wood rot, foundation problems and landscaping erosion. In addition to damage to your home, a rain gutter clogged with soggy leaves and debris is the perfect breeding ground for mold and mildew, as well as mosquitoes and other pests.

People often think that rain gutters have to be on their homes but are never sure why. Rain rolling off of your roof especially a second story roof can really punish the ground below. If there are several rounds of steady rains, this rainwater can carve a small trench on the sides of you home. Rain gutters divert this water away and release it slowly in designated areas of your yard so that this water can be properly drained away. Without rain gutters, yards can flood, erode very quickly from the massive amounts of runoff, and other things if you didn't have gutters.Call Us 888-872-8879

See the original post:
The Rain Gutters Los Angeles | The Rain Gutters Inc

Whether youre doing a project yourself, working with a contractor, or looking for turnkey remodeling services, Bath, Kitchen & Tile Center is your one-stop shop. Since 1963, Bath, Kitchen & Tile Center has been serving residents throughout Eastern Maryland, Delaware, Southern Pennsylvania, and beyond.

Our products and services include retail, wholesale, and more:

Keep reading to learn more about each of our services, or schedule your showroom consultation today to get started!

As a full-service design-build and remodeling company, Bath, Kitchen & Tile Center provides everything you need for your home remodeling or commercial construction project from start to finish, including installation, lighting, drywall, and more. Our remodeling services include:

Already hireda general contractor but need help with the design aspects of your remodeling project? We know that some contractors are not equipped to handle all the detailsthats where we come in. Well help you choose the right design features, cabinets, countertops, appliances, and accents for your new kitchen or bathroom and ensure everything matches your vision.

If you prefer to handle home renovations yourself and just need the right materials to get the job done, we can help with that, too. Our showrooms in Wilmington, Newark, Harbeson / Lewes, and Bel Air have everything you need to decide on the best countertops, cabinets, tile, appliances, hardware, and more. Our design professionals will meet with you to learn your needs and direct you to the best products for your project. Bath, Kitchen & Tile Center is Delawares source for direct cabinets.

Bath, Kitchen & Tile Center works alongside home builders and commercial property managers on new construction, custom homes, new developments, apartment renovations, and much more. You tell us what you need and well get it doneat wholesale prices! Whether your floorplans already dictate a kitchen layout for a new development or you need our help with a design for a custom home, we can handle it. We have longstanding relationships with local builders and are always ready to embark on a new partnership.

We back everything we do with the reliability that can only come with time and experience. Although we practice tried-and-true remodeling methods and techniques, were on the cutting edge in our industry, offering the latest selection of high-quality products and the best ideas in design and functionality.

Our reputation is the cornerstone of our business. Weve been helping homeowners remodel their spaces since 1963, and some of them love our work so much that theyve become repeat customers. One family hired us nearly two decades after their original remodel to revamp their kitchen a second time!

Whether you need a full remodel or want to handle the installation yourself, we are the only home remodeling and designcompany you will ever need. Call us today for service in these areas:

Looking for top-quality design, service,and value on your next remodeling project?Contact us todayand schedule a free showroom consultation. We serveMD, NJ, DE, and PAincluding Newark, Wilmington, Bel Air, Lewes, Bethany Beach, Rehoboth Beach, and more!

Read more from the original source:
Kitchen & Bathroom Remodeling DE, MD, PA & NJ | Factory ...

1. Planning:

Your bathroom be a place of peace and relaxation. Its dcor should complement your homes design and meet your needs at the same time. Before you start your remodel with KBF Design Gallery, you should have an idea of what you want, and if it makes sense for your specific needs.

The most important aspect that goes into finding and sticking to a budget is step 1Planning! Think about what you want out of your bathroom, the style that appeals the most to you, and if this idea will fit within your budget. Keeping your plumbing in place can cut remodeling costs substantially, so try to decide if you can get what you want without moving around your toilet, bath tub and sink.

Like in step 2, knowing your layout can help make the most of your remodeling project. At KBF Design gallery, we can make your idea a reality no matter what your current set up may be. If you are unsure if your layout will suit your remodeling needs, give us a call! We would be glad to give you our expert opinion.

Depending on the style you are going for, you will need different materials. We are here to help you choose the right materials for the job. Do you want a modern design? Or something a little more clean and traditional? We are experts in all aspects of Orlando bathroom remodeling.

Sure, you can have a beautiful bathroom, but does it have enough storage? Is your tub big enough to bathe your children in? Do you need to make efforts to try to conserve water with your sink? All are important aspects to keep in mind when you are planning your bathroom remodeling project. The more you know what you want, the easier it is for us to give it to you.

Especially for something as sensitive as a remodeling job, hiring the best of the best is crucial. After all, you have to live with your bathroom as long as you live in your homewhich is often times forever. Get it right the first time by consulting our industry experts.

>> Related Content: Kitchen Remodeling

At KBF Design Gallery our bathroom remodelers ask all the right questions so that your new bathroom turns out exactly the way you imagined it. Whether you vision a bathroom that is modern or traditional, bright and inviting or dimly lit and elegant, loaded with features or sleek and streamlined our team will make your dreams a reality.

Over the past 23 years, weve worked with thousands of families, designing custom bathrooms to suit different lifestyles and personal style preferences.

Work with a company that understands the balance of form and function like no one else does.

We take the time to walk you through all of the options from the big projects like your vanity cabinets, flooring and counter tops to the smaller selections like the fixtures, exhaust and decorative tile design to make sure you are armed with all the information to make the right decision.

Having your bathroom remodeled is one of the most popular home improvements to date. Everyone loves a beautiful bathroom, big or small. Not only does a new bathroom enhance the beauty of your home, it also raises your home value, and changes how you use that special room. A fresh new look with custom finishes and personal touches will brighten your home life and increase the overall value of your property.

A custom bathroom design is a big undertaking that should be trusted to a company that has the experience to make it all come together seamlessly. KBF Design Gallery has earned a reputation as Orlandos most trusted in bathroom remodeling by taking the same approach time and time again: we listen to you! Take a tour of our portfolio to experience the KBF difference.

See the rest here:
Bathroom Remodeling - KBF Design Gallery