Home Builder Developer - Interior Renovation and Design

Meets the requirements of ASTM C 1289, Type II, Class 4, Grade 1

High-Density Polyisocyanurate Foam Core: Closed cell polyisocyanurate foam technology provides additional insulation value (R-value of 2.5), with lightweight and low water absorption characteristics.

Inorganic Coated Glass Facers: (With no cellulose) Provide improved resistance to mold growth, as well as a smooth surface that performs well with self-adhering systems, and efficient adhesive application in adhered single ply systems.

Lightweight: Offers labor and installation efficiencies and allows more options for situations where the overall weight is a concern. This also means easy hoisting, staging and maneuvering around the roof.

High R-Value (2.5 R): Provides significantly more thermal insulation (R-value) than wood fiber or gypsum boards.

User Friendly: ProtectoR HD allows easy & efficient scoring, cutting and snapping which permits fast, tight fabrication and all in a low dust environment.

Resistance To Damage: High impact, flexural and compressive strength pro- vides a protective layer for insulation while working with the membrane above to ensure maximum performance and longevity.

Up to 50% Fewer Fasteners: Achieves FM 1-90 utilizing 8 fasteners per 4'x8'boardwithanadhered reinforcedmembraneand11fastenersper 4'x 8' board with an adhered non-reinforced membrane over a min. 22 ga steel deckorstructuralconcretedeck.

Read more:
TPO Roofing Systems | Johns Manville - jm.com

Have you considered vinyl plank flooring, but find product and installation costs confusing? Its hard enough to estimate a budget without including additional expenses, as well as the time it will take to complete.

In addition to the materials, youll have to account for the cost of preparation and installation. If youre tearing out your old floors, dont forget to plan for their disposal.

A simple renovation can turn into a money hemorrhage if youre not careful. Always, get the full picture before you start shelling out dollars. Heres a few pointers to make your decision less stressful.

Vinyl planks can cost as little as $2 a square foot. But, as with anything, you tend to get what you pay for. You may find the least expensive options wont meet your needs, and you might have to replace them sooner than youd expect.

If you want your floors to hold up over time, its worth opting for a mid-priced plank. Luxury vinyl planks are waterproof and have better wear resistance. Unfortunately, they can cost almost double the price of bargain materials.

Your local big box store might offer cheaper solutions, but youll run the risk of lower quality and less support. Higher priced planks feature better padding, thick top coats, and longer warranties. Look for a brand thats up-front about theirmanufacturing, certifications, and the durability of their products.

If youre using planks in a high traffic area, its worth spending more on quality materials. Cheaper planks are prone to staining and scratching, and actually installing them can be a nightmare.

Back to Top

If you want vinyl planks that reduce noise, add a layer of padding to the subfloor. Underlayments are especially beneficial when adding planks to a second story. If the kids are playing upstairs, they wont sound as if theyre falling through the ceiling.

Underlayments keep your floors warmer and double as underfoot cushioning. Although many installs dont require it, your feet will appreciate the softer layer.

If youre installing vinyl planks in humid or damp areas, use a vapor barrier. Over time, these layers protect the planks from mold and mildew.

Do you have a way to monitor humidity levels? If the humidity level isnt right, youll risk ruining your floors and voiding your warranty. You can buy a decent indoor monitor for less than $20.

A successful installation requires tools including a rubber mallet, tapping block, utility knife, level and a tape measure. If youre making cuts, a jigsaw, multi-tool or miter saw will help you notch the planks and undercut any door jambs.

If youre gluing your vinyl planks, buy the recommended adhesive and have a way to vent the fumes. Study the installation guide before starting, as this method is tricky and permanent.

Remember to include the costs of wall trim, transition strips, and stair nosing if applicable.

Back to Top

Many people fail to plan for the disposal costs and demo time needed to do the job. If youre removing carpet or resilient floors you might need a dumpster and an extra pair of hands. Depending on how much help you have, demo and disposal can take an entire weekend.

If youre removing floors with mold or asbestos, youll need a certified expert to do the job. Its mandatory to handle these materials carefully to avoid exposure to harmful toxins. You might be tempted to remove it yourself but dont, the health risks arent worth it.

When installing vinyl planks over tile, youll need to fill in any slopes in the flooring. Check that the subfloor is level to the manufacturers specifications. If it isnt, be prepared for your planks to buckle and shift.

Lastly, inspect your subfloor to ensure its clean and free of debris. Go over the surface with a heavy-duty vacuum before starting your installation.

Back to Top

In many cases, a DIY installation can cost more than hiring a professional. Once you add up the materials and time needed for the job, you might realize youre saving less than you thought.

Look online to get an accurate picture of what professional installers in your area charge. Some websites enable you to submit information to receive custom bids. Referral sites like Homeadvisor and Angies List also include reviews from past customers.

Look for contractors that include the extras, as well as labor and disposal in their estimates. An installer can knock out the floors in half the time it takes the average weekend warrior. Hiring a pro means never wondering if you have the time or ability to install your planks.

Installers guarantee their work from start to finish. If the planks are shifting, theyll often fix them without charge. At first, the up-front expenses might seem discouraging, but hiring an installer can work to your advantage.

Back to Top

Look at all the hidden costs when youre calculating your budget. Better flooring may be worth the added price. Luxury vinyl planks look and feel better than many bargain alternatives.

Consider spending a bit more for quieter and softer flooring. Better lines come with attached padding, lifetime warranties, and increased durability.

Anticipate all the materials youll need from the start. Estimate the costs of demo, removal, and prep. Have a realistic idea how long it will take you to complete the job. If you dont have the time or resources for a DIY, hiring a pro is a better choice.

If you approach this project with your eyes open, you wont regret your decision. Whats the number one lesson youve learned while doing a home improvement project?

About Jeanine Hintze

Jeanine Hintze is a professional content writer, and home improvement enthusiast from Long Island.

Read the original:
Vinyl Plank Flooring Cost & Installation Pricing | 2019 ...

Energy efficient windows with lifetime warranties provide peace of mind and energy savings. We carry every type of window and many grid, color and other options to choose from.

Your home's siding protects against the elements and defines the look of your home. Change the look and feel of your house while simultaneously eliminating painting with new vinyl siding.

As a Certified GAF contractor you can rest assured that our complete roofing systems featuring GAF Timberline shingles and all the necessary components won't leak.

Whether its a complicated front door unit with sidelights and transom or a basic backdoor, our entry doors will eliminate drafts and maintenance and add great style to your house.

Sliding doors for decks and patios that open easily and seal your house from the elements. A range of options are available including colors, blinds and multi-point locking systems.

Garage Doors built to last with heavy duty tracks and rollers and extended warranties. A range of panel styles with multiple color and window options let you choose the perfect design.

Retractable, fixed fabric or aluminum awnings that shade you from the sun and protect from precipitation with literally hundreds of color options.

Powder coated aluminum railings that wont rust or virtually maintenance free vinyl railings enhance safety and aesthetics. Available with various designs and colors.

Resurface your existing deck with new wood or composite decking that is stain and fade proof.

Here is the original post:
NJ Windows, Siding, Roofing, Entry Doors, Garage Doors ...

1. Clear the area. Kill weeds and any remaining poor-looking grass with a non-selective herbicide about 2 weeks before you want to seed your lawn. After everything is completely dead, rake the area to remove the debris.

2. Prep for success.Now is a great time to core aerate the area if your soil is really compact. (Learn more about aerating here.) After aerating, rake the area level and loosen the top inch of soil. Then add a 1-inch layer of Scotts LawnSoil evenly across the entire planting area. Its specifically formulated with a blend of rich, composted materials to provide an excellent growing environment for young seedlings.

3. Select your grass seed.Choose a Scotts Turf Builder Grass Seed that is right for your location. Do you live in the north and need a grass type that stays green in cooler temperatures, or do you live in the south and need a grass type that stays green during the hot summer months? Be sure to also take into consideration the growing conditions in your area: How much sun? How much wear and tear from children and family pets? If you need help finding a grass type that matches your growing conditions, check out our Identify Your Grass article.

4. Spread your grass seed.Once youve selected your grass seed and your soil is prepped, its time to seed. This is the easy part. Just fill up your Scotts spreader with grass seed, adjust the spreader settings according to the label directions (use the New Lawn coverage rate) and apply.

5. Feed for growth.After youve spread your grass seed, apply Scotts Turf Builder Starter Lawn Food for New Grass to provide developing grass seedlings much-needed nutrients so the young root system can grow deeper, faster. If you're reseeding with Kentucky bluegrass, ryegrasses or fescues, apply Scotts Turf Builder Starter Lawn Food for New Grass Plus Weed Preventer instead. It not only gives developing seedlings needed nutrients but also prevents listed weeds like dandelion and crabgrass from sprouting for up to 6 weeks.

6. Water daily.Proper watering is a critical step to seeding success. Keep the soil surface moist by watering daily or as needed until the seedlings reach at least 2 inches tall.

Excerpt from:
How to Replant Lawn Grass - Lawn Repair - Scotts

Keeping a lawn lush and green requires consistent mowing, weeding, watering, fertilizing and more. If your lawn is particularly large, it may make sense to hire a full-service lawn care provider. Whether you take a DIY approach or bring in the experts, maintaining your lawn requires a range of tasks.

Plan to mow the lawn often, allowing it stay longer than may seem convenient longer grass is healthier grass. The general rule is to cut off no more than a third of the grass blade. This helps prevent damage to the lawn as well as keeping weeds from taking root. Its also important to remove any weeds, then prevent new ones from growing. In spring, consider spraying a pre-emergent herbicide on your lawn to prevent crabgrass and other types of weeds from sprouting from seed. During other seasons, broadleaf weeds like dandelions can be pulled by hand or sprayed with weed killers. The best time to water your lawn is early in the morning, allowing the sun to help dry the grass. Make sure to thoroughly soak the lawn so that the water penetrates several inches into the ground.

Lawn care also requires feeding; look for a mixture of fast- and slow-release fertilizers that include nitrogen. Some lawns also benefit from aeration, which creates small holes to let air, water and nutrients penetrate the grass roots. Although most homeowners can manage these tasks on their own, a full-service lawn care company can handle them on a regular schedule, taking the guesswork out of maintaining a beautiful lawn.

See original here:
The 10 Best Grass Seeding Companies Near Me (with Free ...

You may be able to mount your flat screen TV above your fireplace for a more streamlined look in your living room. In fact, TV mounting professionals can hang your flat screen TV flush with a wall or from a tilting or full-motion bracket mount in any room in your home. A tilting or full-motion mount may be the best option above a fireplace so you can tilt the TV down for the best viewing angle. Whether the wall above your fireplace is brick, drywall, concrete, stone or plaster, most television mounting services can accommodate your needs. Hardier wall surfaces like concrete or brick will require more labor and expertise to mount, and will likely have a higher price range.

If you want your AV and cable wires hidden in the wall, you will also pay a higher price due to the added time and skill to properly drill the holes and run wires. Before mounting your TV above your fireplace, consult with the manufacturer about necessary distance from heat sources. If the space above your fireplace gets too warm, another location could be better for the longevity of your TV. Your television mounting services may take between one and two hours, or more depending on your home theater setup.

See more here:
The 10 Best Cable TV Wiring Installation Near Me (with ...

Step-by-step instructions: How to install Hardie Board lap siding, HardiePlank lap siding, and siding products, trim and more. Follow these instructions for a long-lasting installation.

HardiePlank or Hardie board lap siding products carry a 30-year warranty and installation is not much different than installing regular wood lap siding.

Fiber cement lap siding is a long-lasting durable product that installs in much the same way as regular lap siding. Hardie Board is a lap siding product manufactured by the James Hardie Corporation. Installing your own Hardie Board siding wont break your back or your budget.

Read Also:

HardiePlank lap siding is a fiber cement siding product that doesnt rot and carries a 30-year warranty. It comes in a variety of colors and two surface finishessmooth and a texture the company calls Cedarmill. The Cedarmill texture looks very much like real wood.

After installation, you can paint the product with 100 percent acrylic paint to change the color if desired. Doing your own Hardie board lap siding installation takes about the same amount of labor as installing real wood lap siding and saves you a considerable amount of money on labor costs.

After removal of the old siding, new house wrap should be installed to provide a water barrier between the new siding and the homes plywood or OSB sheathing. Trim corners first so that the correct gap between the trim and siding is maintained.

The James Hardie company offers fiber cement trim boards in various widths for use as corner trim, fascia, soffits, rakes, and batten boards to complete your Hardie board installation.

Measure up from the ground 6 inches plus the width of one plank at a corner and make a mark on both sides of the corner. You must maintain a 6-inch clearance between the ground and the planks and a 2-inch clearance between finished surfaces like deck boards, concrete, steps or sidewalks and roofing materials or flashing.

Place a laser level on the mark pointing at the next corner. Use the laser to mark the next corner and snap a chalk line between the marks. Extend the chalk line around the house using the laser to mark the subsequent corner.

Place a corner trim piece against the corner and make it flush with the edge of the corner. Nail it in place with two siding nails every 16 inches. Place the second piece of corner trim on the opposite side of the corner flush with the outside edge of the first piece. Nail it to the house framing with two siding nails every 16 inches. Do all the corners before continuing.

Hold a HardiePlank siding board with the top edge against the chalk line and 1/8 inch away from the corner trim. Nail the board to the house every 16 to 24 inches with a roofing nail along the nail line printed on the top of the siding board.

Measure down from the top of the installed board 1 1/4 inches every four feet and make a mark. Hold the next board on these marks and nail with siding nails along the nail line. You can also buy clips that hold the siding planks in place with the 1 1/4-inch overlap and break off after the planks are nailed.

The planks may be scored and snapped similar to cutting drywall by using a carbide scoring knife. Another method uses a special James Hardie supplied saw blade on a circular saw equipped with a vacuum to gather the fiber cement dust which is hazardous to your health. Always wear a dust mask when cutting fiber cement products.

Hardie board installation will require joints between planks. Join factory edges and place the cut edges against the corner trim boards. Caulking joints are unnecessary, but flashing behind the joints is required. Cut a piece of 6-inch wide steel coil trim about 1 inch longer than the width of a siding board and place it behind the joint. Nail it to the house sheathing with a roofing nail.

Caulk the corners where the siding meets the corner trim. Use an exterior grade, paintable latex caulk. Run a 1/4 inch bead of caulk to cover the gap left between the trim boards and the lap siding.

To complete your Hardie board lap siding installation, paint primed HardiePlank within 180 days of installation and unprimed HardiePlank within 90 days of installation. ColorPlus products are coated at the factory and dont require painting.

Read more here:
How to Install Fiber Cement Lap Siding - housesumo.com

Spacing for the siding should be laid out beforehand. The number of board spaces between the soffit and bottom of the lowest piece of siding at the foundation should be such that the overlap is as per the table.

Start with the bottom course using a furring strip to support the lower edge. Each succeeding course overlaps the upper edge of the previous one by a minimum of 1 inch. Rabbeted patterns are self-spacing, but leave 1/8 inch expansion clearance. Where possible, the bottom of the board that is placed across the top of the windows should coincide with the window cap.

Bevel siding should be face nailed to studs with 1-1/4 inch penetration into solid wood using one nail per piece spaced at a maximum of 24 inches on center. Place nail just above the overlap. Take care not to nail through the overlap of two pieces.

Do not reduce the siding overlap recommendations given in the installation sections of this publication. Doing so could result in damage from wind-driven water. Use the larger overlaps for unseasoned sidings to allow for shrinkage and expansion. Take care not to overdrive fasteners when using larger overlaps. Butt joints between boards should be staggered and meet on studs. Fit siding snugly to other pieces and to trim.

*These overlap recommendations must be followed for proper installation.

Excerpt from:
Installing Western Red Cedar Bevel Siding - Real Cedar

If you've decided to side your home you've no doubt done your homework and selected the best quality products and accessories to realize your design dreams. But there's still some important legwork left to do. Even if you chose a top-of-the-line product, if your walls aren't straight and free of rot, or if the material is not installed correctly, your new siding won't look good. Even worse, it won't perform the way you planned. Review the following to avoid the fear factor and make sure you prep correctly, and hire an installer who'll meet your expectations.

Homeowners and home improvement professionals alike have long relied on the unsurpassed quality and durability of the innovative home products of GeorgiaPacificVinyl Siding and Accessories. Part of this commitment is providing in-depth installation instructions for our products. GeorgiaPacificVinyl Siding and Accessories products were designed and manufactured to perform best when installed by qualified applicators. While Ply Gem does not assume responsibility for installation of its products, it does keep installers informed on new techniques and provides detailed installation instructions on all of its products. We frequently update our installation manuals with new and improved methods of application. You should discuss any product adjustments with the dealer or applicator who did the work. The original dealer or applicator can best make these adjustments, since he or she will be most familiar with your installation.

To retrieve installation instructions for our products, simply download from the link below.

Adobe Acrobat Reader must be installed to view PDFs.Download Adobe Acrobat Reader

Georgia-PacificVinyl Siding and Accessories Installation Manual

Shutter Mounting Clips Installation Instructions

Vinyl Skirting Installation Guide (Bilingual)

Mantel Installation Instructions

Pilaster Installation Instructions

See the rest here:
Installation - Georgia-Pacific Vinyl Siding and Accessories

If you want siding for your home that looks great and is durable, but requires little maintenance, look no further. Vinyl siding is designed to withstand weather and resist moisture damage. It can have the look of wood siding, without the ongoing work and expense.

Save Big with Vinyl Siding

You'll pay about the same as wood siding, but you have the option to go less expensive with vinyl. If you install it yourself, you'll find even greater savings. In addition, you won't have extra maintenance costs through the years because it wont crack, rot or splinter.

Find Vinyl in a Variety of StylesFor a classic look, choose materials that have a woodgrain texture. Dutch Lap white siding by Cellwood looks great and is styled with a recessed curve along each plank. Try Veranda bead board siding, which can be installed right over traditional bead board.

Update your older home with an easy DIY repair job using clip-on super corners. It only takes a few minutes to install them over any faded or damaged corners. It makes worn siding look new again.

If you go with vinyl siding, you can have a beautiful home without the work of caulking or painting. Simply clean with soap and water to keep it looking brand new.

The rest is here:
Vinyl Siding - Siding - The Home Depot